Our Products
all type sensors
the lm35 is one kind of commonly used temperature sensor that can be used to measure temperature with an electrical o/p comparative to the temperature (in c). it can measure temperature more correctly compared with a thermistor. this sensor generates a high output voltage than thermocouples and may not need that the output voltage is amplified. the lm35 has an output voltage that is proportional to the celsius temperature. the scale factor is .01v/c.
Additional Information:
Delivery Time : 1 day
description:-
ultrasonic ranging module hc - sr04 provides 2cm - 400cm non-contact measurement function, the ranging accuracy can reach to 3mm. The modules includes ultrasonic transmitters, receiver and control circuit.
features:-
1.high sensitivity ultrasonic range sensor
2.works with arduino board
3.working voltage - dc 5v, working current - 15ma
Introduction: a float sensor is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices. The magnetic float sensor is an electromagnetic on/off switch. It helps to sense the level of water present in the overhead tank or sump. These sensors have a permanent magnet in the float. The switch is present in the white stem of the sensor. As the float rises or falls with the level of water in the tank, the switch gets activated by the magnet in the float, thereby the signal which is obtained from the sensors is used along with the water level controllers for controlling the motor pump.
Additional Information:
Delivery Time : 1 day
Load cellsturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures force from 0-20kg, load cell specs: 22 cm (8.5 in) wire leads pre-attached. Dimensions 12.7 mm high, 12.7 mm wide, 80 mm long (0.5 in x 0.5 in x 3.15 in). 4 mounting holes, 15 mm spacing on each side. One both holes tapped m4 thread, the other side both holes tapped m5 thread., Hx711: This top of the line load cell amplifier mounted on a breakout board pairs perfectly with the load cell to provide fast, accurate force measurements. It measures small changes in the resistance of the strain gauges mounted to the load cell and passes these values directly to any microcontroller (like an Arduino or raspberry pi)., Connection (to hx711): Red to e+, black toe-, green to a+, white to a-, package content: 1 x 20kg load cell, 1x hx711.
Additional Information:
Delivery Time : 1 day
Additional Information:
Delivery Time : 1 day
heart rate data can be really useful whether you are designing an exercise routine, studying your activity or anxiety levels or just want your shirt to blink with your heartbeat. the problem is that the heart rate can be difficult to measure. luckily, the pulse sensor amped can solve that problem. the pulse sensor amped is a plug-and-play heart-rate sensor for arduino. it can be used by students, artists, athletes, makers, and game & mobile developers who want to easily incorporate live heart-rate data into their projects. it essentially combines a simple optical heart rate sensor with amplification and noise cancellation circuitry making it fast and easy to get reliable pulse readings. also, it sips power with just 4ma current draw at 5v so its great for mobile applications. simply clip the pulse sensor to your earlobe or fingertip and plug it into your3or5 volt arduino and you are ready to read heart rate! the 24' cable on the pulse sensor is terminated with standard male headers so there as no soldering required. of course, arduino example code is available as well as a processing sketch for visualizing heart rate data.
Additional Information:
Delivery Time : 1 day
Additional Information:
Delivery Time : 1 day
Additional Information:
Delivery Time : 1 day
Product Description: Operating voltage: Dc3-5v, operating current: Less than 20ma, sensor type: Analog, detection area: 40mmx16mm, production process: Fr4 double-sided has. Water sensor water level sensor is an easy-to-use, cost-effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume to determine the water level. Easy to complete water to analog signal conversion and output analog values can be directly read Arduino development board to achieve the level alarm effect. Operating voltage: Dc3-5v, operating current: Less than 20ma, sensor type: Analog detection, area: 40mmx16mm, production process: Fr4 double-sided has, operating temperature: 10-30 humidity: 10 percent -90 percent non-condensing, product dimensions: 60mmx20mm. The package includes a 1 x sensor module.
Additional Information:
Delivery Time : 1 day
The InvenSense MPU-6050 sensor contains a 3 Axis MEMS accelerometer and a 3 Axis MEMS gyro in a single chip. It is very accurate, as it contains 16-bits analog to digital conversion hardware for each channel. Therefor it captures the x, y, and z channel at the same time. The sensor uses the I2C-bus to interface with the Arduino."
Additional Information:
Delivery Time : 1 day
This is a simple water sensor, can be used to detect soil moisture. Module Output is a high level when the soil moisture deficit or output is low. It can be used in a module plant watering device, and the plants in your garden no need people to manage.
Additional Information:
Delivery Time : 1 day
see less
features & details
range : 10-15 cm2.input supply voltage: 5v dc3.three pin burg male header for easy interface. 4.comes with an easy to use digital output pin5.2.5mm diameter hole for easy mounting.6.5v operated, easy to interface with wide range of micro-controller, like arduino, avr, arm, 8051, pic, msp430 etc.
digital output. Output voltage for logic one(+3.5v) and logic zero(0) 0.0v
interface with arduino, avr, 8051, pic, arm, msp430 (green)