Vadodara, Gujarat, India
Our Products
Transformer core lamination for Power & Distribution transformer is manufactured from various grades of Cold Rolled Grain Oriented (CRGO) steel. Lamination in various shapes & sizes are slit and cut to size required accurate geometrical shapes with 90 & 45 cutting systems. The manufacturing of Transformer Lamination involves a high degree of precision engineering.
We manufactures complete CRGO assembled cores for distribution and power Transformers upto 10 MVA (10000 Kva) with no load losses tested and appropriately packed and ready for insertion of LV and HV coils. A pre-measuring of the CRGO core losses guarantees the required no-load losses of Transformers.
The core assembly is vertically placed with the foot plate touching the ground. the top yoke of the core is removed. The limbs of the core are tightly wrapped with cotton tape.
Cylinder made out of insulating press board/pressphan paper is wrapped on all the three limbs.
Low Voltage Coil is placed on the insulated core limbs
Insulating block of specified thickness and number are placed both at the top and bottom of the L.V.Coil.
Cylinder made out of corrugated paper or plain cylinder with oil ducts are provided over L.V.Coil.
H.V.Coils are placed over the cylinder.
Gap between each section of H.V.Coils including top & bottom clearances is maintained with the help of oil ducts, as per the design/drawings.
The Top Yoke is refilled. Top core frame including core bolts and tie rods are fixed in position.
Primary and secondary windings are connected as per the requirements. Phase barrier between H.V.phases are placed as per requirement. Connections to the tapping switch or oltc (if required) are made.
Finally, the component is placed in the oven.
Vilas Transcore is devoted to the development of high-efficiency energy-saving and excellent performance magnetic cores. As a reward of its continuous efforts, the company has been the leader of magnetic core manufacture in India. Quality is the priority issue in Vilas Transcore's philosophy; it was certified to TUV ISO 9001 quality assurance system in 2008.
Vilas Transcore produces Toroidal Cores in many different dimensions made to order to customer specification.
Vilas Transcore Ltd. specializes in manufacturing Toroidal Cores in c.r.g.o. materials for low, medium and high frequency, CTs, PTs and various types of Transformers.
Vilas Transcore is devoted to the development of high-efficiency energy-saving and excellent performance magnetic cores. As a reward of its continuous efforts, the company has been the leader of magnetic core manufacture in India. Quality is the priority issue in Vilas Transcores philosophy; it was certified to TUV ISO 9001 quality assurance system in 2008.
Vilas Transcore produces Toroidal Cores in many different dimensions made to order to customer specification.
Core can be manufactured in material grade ZDMH/HPDR, ZdKH, MoH, M4 as per the specification of the customer.
Cores can be manufacture in material thickness 0.18mm, 0.23mm, 0.27mm, 0.30mm and 0.35mm.
Cores are available in epoxy coating with varnish and bare cores according to customer specification.
Electrical TestingAll cores, unless otherwise state, are individually tested to the standard guarantee specifications. Special test conditions, when required, can be applied and guaranteed to suit customers individual requirements.
Vilas Transcore Ltd. specializes in manufacturing Toroidal Cores in c.r.g.o. materials for low, medium and high frequency, CTs, PTs and various types of Transformers.
Vilas Transcore is devoted to the development of high-efficiency energy-saving and excellent performance magnetic cores. As a reward of its continuous efforts, the company has been the leader of magnetic core manufacture in India. Quality is the priority issue in Vilas Transcores philosophy; it was certified to TUV ISO 9001 quality assurance system in 2008.
Vilas Transcore produces Toroidal Cores in many different dimensions made to order to customer specification.
Core can be manufactured in material grade ZDMH/HPDR, ZdKH, MoH, M4 as per the specification of the customer.
Cores can be manufacture in material thickness 0.18mm, 0.23mm, 0.27mm, 0.30mm and 0.35mm.
Cores are available in epoxy coating with varnish and bare cores according to customer specification.
Electrical TestingAll cores, unless otherwise state, are individually tested to the standard guarantee specifications. Special test conditions, when required, can be applied and guaranteed to suit customers individual requirements.
Vilas Transcore Ltd. specializes in manufacturing Toroidal Cores in c.r.g.o. materials for low, medium and high frequency, CTs, PTs and various types of Transformers.
Vilas Transcore is devoted to the development of high-efficiency energy-saving and excellent performance magnetic cores. As a reward of its continuous efforts, the company has been the leader of magnetic core manufacture in India. Quality is the priority issue in Vilas Transcores philosophy; it was certified to TUV ISO 9001 quality assurance system in 2008.
Vilas Transcore produces Toroidal Cores in many different dimensions made to order to customer specification.
Core can be manufactured in material grade ZDMH/HPDR, ZdKH, MoH, M4 as per the specification of the customer.
Cores can be manufacture in material thickness 0.18mm, 0.23mm, 0.27mm, 0.30mm and 0.35mm.
Cores are available in epoxy coating with varnish and bare cores according to customer specification.
Electrical TestingAll cores, unless otherwise state, are individually tested to the standard guarantee specifications. Special test conditions, when required, can be applied and guaranteed to suit customers individual requirements.
