MI 3205 TERAOHMXA 5KV
MI 3205 TeraOhm XA 5kV is a portable battery (Li-ion) or mains powered test instrument with excellent IP protection (IP65 case closed and IP54 case open), intended for diagnosing of Insulation Resistance by using high test voltages of up to 5 kV. It is designed and produced with the extensive knowledge and experience acquired through many years of working in this field

Features:

nsulation Measurement;
Diagnostic Test (PI, DAR, DD);
Step Voltage Test;
Withstanding Voltage Test (DC) up to 5 kV;
Voltage and frequency measurement up to 550 V TRMS.
Insulation resistance up to 15 T;
Adjustable test voltage (50 V.5 kV) 50 V and 100 V step;
Programmable timer;
Capacitance measurement;
Charging rate for capacitive load < 1, 5 s / F at 5 kV;
Automatic discharge of test object after completion of measurement;
Guard terminal;
High voltage breakdown detection;
Custom defined tests;
Auto adjustment function;
Measurement results in numerical and graphical form;
PC software HVLink PRO for downloading and analyzing of the test results and test report printing;
Isolated RS232 and USB communication ports, BT interface;
High quality accessories including shielded test leads in standard set;
High EM interferences protection: Input AC current noise rejection (1 mA@300 V) and additional averaging of the result (5, 10, 30, 60);
CAT IV / 600 V;
Increased working nominal altitude to 3000 m;
High power Li-ion battery pack (14.8V, 4.4Ah);
Mains and rechargeable battery power supply.

MI 2088 EARTH INSULATION TESTER

Multifunction, digital measuring instrument for testing of earthing and lighting protection systems, PE conductor continuity testing and DC insulation resistance measurement on low voltage electrical installations in accordance with EN 61557.

Features:

Measurements on earthing and lightning protection systems include: standard 4-wire method, standard 4-wire method with current clamps and 2-clamp method without junctions disassembling.
Specific earth resistance (soil resistance).
DC insulation resistance measurement with test voltages from 50 V up to 1000 V in 10 V steps. Measuring range up to 30 GW.

Model:MI 3394

The MI 3394 CE MultiTesterXA is a portable instrument intended for electrical safety testing and CE certification of electrical appliances, machines and switchboards during the production. The PC software MES-Manager enables the upload of automated test sequences, projects, downloading of test results to the PC, automatic data storage into a file and printing of test reports. Due to selected test functions, durable construction and accompanying PC SW package CE MultiTesterXA is the perfect instrument for electrical safety testing in the most demanding environments like laboratories, automated production lines or specialized workshops.

Features:

High Voltage, programmed (AC/DC).
Continuity tests.
Insulation resistance measurement.
Substitute leakage current.
Differential leakage current.
Touch leakage current.
PE-leakage current.
Discharge time.
Functional test (power P/S/Q, voltage, current, cos, frequency, ThdU, ThdI, PF).
Data management: the instrument features in unique user friendly data management facility and state of the art memory organizer.
Multiple test terminals: different test terminals enabling the user to chose from performing single tests or autosequences from single test socket.
Support for Test Adapter: A 1460 CE ADAPTER enables execution of auto tests from single test terminal.
MicroSD: support for microSD memory card (8-GB supplied with the instrument) up to 32GB.
Colour display: 3.4colour LCD display with touch screen.
Hi-pot: high voltage AC (5kV at 500VA) and DC (6kV) test.
Continuity: 4 wire continuity test with selectable test current (0.2 A, 4 A, 10A, 25A) enabling precise measurements.
Communication: 4 RS232, USB, Ethernet and Bluetooth communication ports enabling downloading, uploading and remote control over instrument.
Multi-system testing: the instrument can be used on TT, TN, IT and 115 V supply systems.

BR50 is a Video borescope and camera tester with a 17mm camera diameter and 2.4 in. Color TFT LCD Monitor. Can also test installed surveillance cameras for correct target alignment. Applications include: Home inspection: Inspect in walls for mold, insect infestation, electrical wire or water pipe location; HVAC: Inspect inside ducts, behind motors and compressors; Automotive: View inside or around engines and transmissions; Government: Safety and security inspections; Industrial: Inspect weld integrity, process equipment, gears, molding machines; Aerospace: Aircraft inspections for contamination, debris, cracks or other damage. Comes complete with rechargeable Lithium battery, and Universal AC adapter and charger with USB cable.

Features:

17mm diameter camera head with 39" (1m) flexible gooseneck cable retains configured shape
Four LED lamps with five brightness levels illuminate the viewed object
Glare-free close-up field of view with 480 x 234 pixel display
Automatically detects NTSC and PAL cameras
Complete with rechargeable Lithium battery, and Universal AC adapter/charger with USB cable

Models :UT583, UT585, UT586

UT580 Series is a digital RCD tester which adopts intelligent micro controlling chip as the core and is equipped with full-purpose protection circuit design. It is used for measurements of operational current and trip time of leakage current protection switch, as well as connection check.

Features:

It has functions such as phase selection, remote controlling measurement, over-temperature detection, , connections check. It has high precision, stable performance, simple, safe and reliable operation. It is widely used in houses, schools, electric power, manufacturing, smelting and chemical industries. It is an ideal tool for leakage current protection switch' s producing, assembling, checking, and repair.

Model : UT273, UT275, UT276A , UT278A

UT270 series can measure the grounding system of a circuit without disconnecting the ground wires and auxiliary electrode. It clamps the grounding circuit and measures the grounding resistance fast and safely.

Features:

It can measure resistance as low as 0.01 ohm and has a high resolution of 0.001 ohm . It has overload alarm function, which can help to setup the alarm value within the ranges. The clamp has double insulation, which strengthens the anti-interference.

model :vdw-2065
veer make digital iron loss tester vdw-2065 is portable & easy to use instrument which is very useful to find watt loss of electrical steel immediately. Internationally accepted standard method of testing is epstein frame method but that method needs 30mm x 305 mm size & min. 250g weight of material. Stamping, laminations can not be tested on epstein frame because of size. So, we have designed a direct reading type single sheet tester called digital iron loss tester vdw-2065 which provides very fast testing of final products like stamping, ei & other laminations etc.

features:

direct measurement of watt/kg
immediate testing of specimen
user friendly operation
testing up to 0.65mm thickness
testing for 1.0 - 1.8 tesla induction
testing up to 19.00 watt/kg
portable size, easy handling
ultra glow red led display
iso 9001:2008 compliance

Model:VCT-01
VEER make Toroidal Core Tester VCT-01 is portable & easy to use instrument which is very useful to measure AC magnetic properties of Electrical steel of Toroidal core of different grade and size. We provide Free Computer software along with VCT-01 so, you can create test report of test specimen in computer.

Features:

Direct Measurement of Watt/kg, AT/cm & Induction
Tampere proof calibration
Small in size
20 x 4 Bright LCD Display
Easy to use
Hold Facility
Inbuilt memory
Computer interface
Free software to generate test report
Modification as per customer requirement

The MOTWANE make HV TEST SET (MOT-HTS) are used to verify the quality of the insulation between the conductor & its insulation or enclosure .we have different models with range of output voltages from 5KV to 70 KV AC/DC. The MOTHTS comes with adequate cooling systems like air/oil cooling depending upon the ratings.There is HRC fuse protection is provided for control circuits. Bright LED indicators are provided for indicating input /output status. It is having one knob control to vary output VOLTAGE. The mode of operation is manual or motorized The digital / analog KV meter, mA meter is provided for proper measurements. Zero interlocking facility is provided for safety Power utilities, motor, generators transformer, cables, bus bars are the application areas of the H.V. testers.

Features:

Digital/ analog meters for display of voltage & current

Built in Digital Timer for measurement of tripping time

Output voltmeter is with memory effect, in case of failure of supply or tripping

The voltmeter continues to show the reading at which the supply fail**

The leakage current range is upto 100mA

Equipment with compact units for above easy operations

Designed to offer continuously variable output voltage

Various models for AC, DC, & AC/DC voltage

Fast acting over current protection for overloads

Customization as per customers requirements.

UT 650 series lamp tester is a kind of multifunction portable lamp tester. It can be used for excitation and continuity test of energy saving lamps, fluorescent lamps and inert gas lamps.It can test the continuity of incandescent light bulb. It has flashlight function. It is the ideal tool of testing and maintaining the indoor&outdoor lamps.

Features:

It can test the continuity of incandescent light bulb. It has flashlight function. It is the ideal tool of testing and maintaining the indoor&outdoor lamps.

ANALOGUE DISPLAY
METAL BODY
HAND DRIVEN
INSULATION TESTER
Hand drive Insulation Tester is used for measuring insulation resistances of various electrical machinery, Control Panels, Switching Equipment, Insulators Cables, Wiring and various other devices ranging from Small Electrical Units to Large size Transformers. The instrument conforms Is: 2992:1980.Types & Ranges : Testers are available from 50 Volts on wards to 5000 Volts, Tester can also be supplied with a metal flap over the glass window for protection of glass, Fold back handle can provided on request, Dual range also available on request.

Features:

100 VOLTS
10 Mega Ohms - WI 101
20 Mega Ohms - WI 102
50 Mega Ohms - WI 103
100 Mega Ohms - WI 104

model :vet-1608
veer make digital epstein tester vet-1608 is complete stand alone instrument to measure ac magnetic properties of electrical steel of all grade and gauges mostly. It refers astm-343 standard. It also refers iec 60404-2 & is:649. Epstein frame method is standard & worldwide accepted method to test important magnetic parameters like watt/kg, va/kg, magnetizing force, permeability, form factor etc on different induction.

we provide software " veer communication tool" along with vet-1608 which communicates with vet-1608. You can create test report of test specimen in provided ms excel format. This report indicates results & graph of watt/kg, va/kg, ac & peak magnetizing force, ac & peak permeability, form factor etc at different induction which are useful to evaluate material properties and saturation point for specific induction. Hysteresis curve (b/h) facility may also provided in vet-1608 on request.

features:

better accuracy then required by different standards.
accurate sine wave with negative feedback.
20 x 4 line lcd display to display parameters.
usb and rs-232 port for computer interfacing.
free software for test report.
tamper proof calibration.
automatic over voltage shut down.
automatic over current shut down for amplifier.
fuse protection for over current condition
stable source 16v - 8a (optional 24/32v - 12a).
small in size
b/h curve measurement (optional on oscilloscope)

The CT20 is an electronic tool for electricians, alarm, cable installers and others who routinely need to check circuits for continuity and also identify cables and wires. It allows a single user to quickly identify and label two wires even when the wire ends are located in different rooms. It can accommodate test wire lengths up to 10, 000-feet (3, 000 meters), 26-gauge minimum. The CT20s Remote Continuity mode allows the user to check continuity and to identify two or more cables/wires simultaneously.

Features:

A bright flashing LED and loud pulsating beeper indicate local continuity
Remote continuity with the use of the remote probe
Flashing remote probe - two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time
Lightweight and pocketsized, clips on and hangs from the cable(s) under test without falling off
Great for Electricians and Helpers, Cable TV and Audio System Installers, Alarm Technicians, Plumbers, HVAC Installers etc.

MODEL :4671
10MICROA Ultra High Resolution
Large Conductor Diameter (30mm)
AC Current in 5 Ranges (40mA, 400mA, 4A, 40A, 60A)
Wide Frequency Response (40Hz-1KHz)
ACA, ACV, OHM and Continuity

Features:

Large 3 3/4 Digit LCD (4000 Count)
40 Segment Fast Bargraph Display (20 times/sec.)
Data Hold and Max / Min Hold
Relative Measurement
600 Vrms Overload Protection in Resistance Range
Jaw Opening Cable Dia. 30mm. max.(approx)
Display is Manual
Low Battery Indication
Sampling Time 3 time/sec. (Display) 30 time/sec. (bargraph)

MODEL :4680BL, 4680BLC
Non Contact Ground Resistance Measurement
No Auxiliary Electrodes Needed
Data Storing Memory
Data Hold, Noise Signal
Ground Resistance Measurement 0.010 - 1000
Leakage Current (0.5mA - 30.00 A) (Model 4680BLC)

Features:

Suitable for Earthing Strip of 65mm x 32mm
Jaw Opening 65 x 32 mm Approx.
Auto Ranging, Overload Indication, Low Battery Indication
Continuity Loop Test, Configurable Alarm, Auto Power Off
Display 4 Digit 9999 counts LCD

3-1/2 Digit ( 1999 Counts) LCD Display
Auto Power Off Function (after 5 min)
Low Battery Warning Indication
Capable of Measuring Earth Voltage (0 - 20 V AC)
Small, Light Weight & Portable
Extremely Simple to Operate Connect - Press - Read

Features:

Designed to Reject High Levels of Noise & Interference
Designed to Generally Confirm to IS10656 -1983
Range Selection & Single Person Push Button Operation Switches
Two Ranges for Earth Resistance Measurement
Functions Icons on Display
Battery Operated
IEC 1010 CATIII 200V
Sturdy, Elegant & Compact Body

MODEL : DIT99 SERIES
3 1/2 Digit 17mm LCD Display
High Accuracy +/- (3% rdg + 2 dgt)
Single Person Push Button Operation
Designed to Generally Conform to IS 10656-1983
Meets Requirement of IEC1010, Installation Category II, 100V Phase -Earth
Terminal Voltage : >85% of Rated Voltage for Insulation
Resistance Measurement from10% to 100% of the Insulation Resistance Range
5 Models with various Voltage & MOhm Ranges

Features:

Ideal for Insulation Resistance Measurement of Electrical Equipment (Motors, Transformers, Machines, etc), Electrical Cables for Distribution Networks, Cables for Commuinication Networks, House Hold Appliances (Washing Machines, Mixer, Toaster, etc), Industrial, Commercial & Resisdential Installations

The Extech BT100 is a Battery Capacity Tester. Product can be used to test the condition of batteries quickly and easily. As an AC milliohm-meter, the tester measures DC voltage and AC resistance while the battery is in use, helping to save time on repetitive testing trials or large quantities of batteries.

Features:

On-line testing without shutting down battery
Built-in datalogger stores up to 999 tests
Simultaneously measures battery resistance and voltage
PC software for downloading readings to a PC

More than 64 Electrical Parameters on 27 Pages
3 Phase 3 Wire / 3 Phase 4 Wire (Factory Set)
Complete with Standard Accessories
Programmable CTR & PTR, Instr. Address, Password & MD Period
Coloured Input Terminals for Phase Identification
Software Support for Datalogging, Tabulation & Graphs
Built-In 20 Energy Meter of * Digit Resolution
Clamp-On CT's for Current Input
TRMS Measurement
Full Annunciators on Display
Rugged & Portable Casing
RS 485 Port, 5kV Isolated Port (Standard)

Features:

Max. Demand, THD, Password Protection & Auto Scroll Facilities
Energy Retention & Energy Reset Facility
*Additional features for EATMFM96UMTP
Front Key Pad Lock
Run Hours
On Hours
RPM
Interruptions
TOU (Energy, MD)
Shows Current Date & Time

The 480403 Phase Sequence and Motor Rotation Tester has a 40 to 600-Volt rated range for testing phase orientation of 3-phase power sources over a 2 to 400Hz frequency range. LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each of the phases is live. In addition, it indicates rotation direction of the motor to ensure that it doesn't get damaged from incorrect wiring. Meter comes complete with cable and three large color coded alligator clips, pouch case, and 9V battery.

Features:

Indicates rotation direction of the motor
Determine rotation of a motor without contact
LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each of the three phases is live
Double molded durable housing
Easy to use alligator clips with wide jaws

The CB10 is an AC Circuit Breaker Finder/Receptacle Tester that locates circuit breakers and tests receptacle wiring. The CB10 allows the user to quickly locate 110 Volt to 125-Volt AC circuit breakers and fuses with audible and visual circuit breaker indication. The product also features a variable sensitivity adjustment to pinpoint correct circuit breaker. This product is complete with a year warranty, the receiver and GFCI transmitter and a 9V battery for the receiver.

Features:

Quickly locate 110V to 125VAC Circuit Breakers and Fuses
Variable Sensitivity adjustment to pinpoint correct circuit breaker
Bright Red and Green LEDs indicates if receptacle is correctly wired or six fault conditions
Push button GFCI test
Audible and visual circuit breaker indication
Convenient storage position for transmitter/receptacle tester
Eliminates circuit interruptions

Measures the thickness of ferrous and non-ferrous substrates
The CG104 is a pocket-sized coating thickness tester which offers quick one-handed operation and non-destructive measurements of the thickness of ferrous and non-ferrous substrates. Its unique reversible display allows you to take readings in challenging angles of area being measured, plus it has an easy-to use menu system and backlit display feature. Built-in memory stores/recalls up to 255 readings. Complete with two AAA batteries, calibration standards (one ferrous plate, one non-ferrous plate and one standard coating plate film), wrist strap and soft case.

CE 1 Year Warranty

Features:

Dual Technology provides automatic recognition of ferrous (iron and steel) and non-ferrous (copper, aluminum, zinc, bronze, brass, etc) substrates
Magnetic induction for ferrous substrates
Eddy current measurement for non-ferrous substrates
180 reversible LCD display with LED backlight
Store/recall up to 255 measurements
Audible high/low limit alarms
Substrate Zeroing and two-point calibration function
Record/Recall Min/Max/Average readings
Auto-Hold freezes the reading on the display
Auto power off and low battery indicator
Complete with two AAA batteries, calibration standards (one ferrous plate, one non-

Model:VAW-95
VEER make Analog Iron Loss Tester VAW-95 provides easy & fast measurement of iron loss of electrical steel of 0.5mm CRNO. Put test specimen on yoke type probe and see iron loss (Watt / kg) on front mounted Analog Meter immediately.

Features:

Direct measurement of Watt / kg
Analog meter for easy reading
Very useful for 0.5 mm CRNO Steel
Measurement Up to 9 Watt/kg
ISO 9001:2008 Compliance
Portable & easy to operate

Model 10K-PI is a diagnostic insulation tester having test voltage range upto 10KV; an Indigenous MOTWANE designed to conduct automatic diagnostic tests on high voltage equipments like Transformers, Cables, Bushings, Switchgears & rotating machines. 10K-PI is microprocessor based instrument deploying latest technology & very high speed data sampling to give correct, repetitive readings & quality performance under harsh electrical conditions. It has wide insulation resistance range up to 20T ohm.The Information displayed on large backlit LCD display includes insulation resistance, leakage current, capacitance, battery status & timer. Three programmable timers are provided to conduct various tests like Polarization Index (PI), Dielectric Absorption Ratio (DAR), Dielectric Discharge (DD), Step Voltage (SV), & breakdown Voltage (BDV) test.10K-PI can store 1000 test results. PC interface via USB & RS232for data transfer. The software for report generation & data trending analysis helps to keep records of capital equipments.

Features:

Automatic diagnostic test modes of Insulation measurement., PI, DAR, DD and Step Voltage test

Mains and battery operation modes

Three programmable time T1, T2 &T3

Available Diagnostic modes IR, PI, DAR, DD, Step Voltage, BDV & Burn

Programmable Test voltage from 500V-10KV

Insulation Resistance Range from 1K Ohm to 20T Ohm

Mains & Battery operation

1000 test data storage

RS 232 & USB Port

Software for data trending analysis

AC/DC voltage measurement upto 600V

Auto calibration as every start up

The Motwane IT-51 is a microprocessor based Digital Insulation tester designed for testing of all types electrical installation like transformers, switchgear, motors, generators and utility substation equipment. The instrument automatically performs Polarization index by selecting PI mode. IT-51 has a large LCD blue backlit display, it shows leakage current in scrolling form along with IR value and PI value. It is rechargeable battery operated and AC mains provision for battery charging.

Features:

Selectable test voltage from 250V, 500V, 1000V, 2500V, 5000V DC.

Insulation Resistance measurement up to 1 TOhm

Polarization Index measurement facility Short circuit current < 1.4 mA. approx.

AC/DC voltage measurement up to 600V.

Two Programmable timer from 0 Sec to 99 minutes.

Liquid Crystal Display with pleasant blue backlit.

Internal rechargeable Battery.

Safety - IP 54, CAT IV 600V and CE conformity.

Robust ABS body with self-carrying handle for easy portability.

Automatic discharge for capacitive circuits.

Guard terminal to minimize the surface leakage.

The MOTWANEs multipurpose tester Model MIRT-61 is a Versatile, battery operated Digital insulation tester with true RMS industrial grade multimeter features best suited for industrial preventive maintenance. With test voltage range up to 1KV , highest insulation resistance range of 6G Ohm and multi featured function of RMS multimeter (i.e. AC/DC 1000V) ; makes it a superior offering for Industry and Service segment. It is designed predominantly for low voltage insulation resistance testing in maintenance and services, which involves the applications like Cables/Wires, Rotating Machines, LT transformers, Switchgears and Industrial installations. It is designed to suit the extreme environment conditions. Save your operating cost and test more with this single box design rather buying two different products.

Features:

Multipurpose model with IR testing and multimeter functions factility

Wide IR range up to 6G Ohm , suitable for all LT application

Selectable voltage facility 50, 100, 250, 500 &1000V

Maximum test current of 1mA

Industrial Grade True RMS Multimeter functions

Voltage Measurement up to 1000V AC/DC

Dual Display LCD with Amber backlit

Auto power off facility, Reading Hold / Lock, Min/Max, FLT ( Filter )

Ideal for Insulation Resistance Measurement during maintenance for Electrical Equipments (Motors, Transformers, Machines, Switchgears etc.)

Electrical Wire/Cables for Distribution Networks

Control Panels

Electrical Contractors

Industrial, Commercial & Residential Installations

Railways applications & Telecom applications

The Motwane had been offering comprehensive range of products designed in-house catering multiple segment of power and energy sector. Being pioneer in insulation testing the IT250G SPOT is a 5KV voltage selectable digital insulation tester measures digitally and also in analog. It is a battery operated most compact device made to give stable and reliable performance in energy intensive area. Auto power off enhance battery life and pleasant amber backlit allows user to work in dusk environment also. It is ideally suited for many troubleshooting, installation & commissioning in electrical Substations and preventative maintenance on both domestic & industrial applications. IT250G is an ideal suited for onsite testing.

Features:

Most comfortable ergonomics with strap.

Selectable test voltages from 250V, 500V, 1000V, 2500V, 5000VDC.

Insulation Resistance measurement up to 250G Ohm.

Continuity measurement.

Programmable timer from 1 sec .to 99 minutes.

Short circuit current :

The VT30 is a voltage, continuity and phase tester with built in flashlight and backlit digital display with bar graph. The tester features a double molded IP64 housing, polarity detection with LEDs for positive and negative DC and a CAT III 600 Volt / CATIV 600 Volt safety rating. This product is complete with a one year warranty, 2 AAA batteries, protective cap, and pouch case.

Features:

Large backlit LCD display
AC voltage (0 to 480V) and DC voltage (0 to 690V)
Polarity detection with LEDs for positive and negative DC
Continuity Test with audible tone
Phase rotation test for motors
Two handed operation for low impedance testing
Built-in flashlight for testing in tight areas
Rubberized double-molded IP64 housing

Automotive Current Tester with ATC-blade connector
AUT20 is an Automotive 20A Current Tester and ATC Fuse. The ATC-blade connectors plug directly into the fuse block for ease of use. Measuring range from 20A/48VDC (10 seconds max), 10mA resolution. Includes one 12V A23G battery.

Features:

ATC-blade connector plug into the fuse block
Measuring range: 20A/48VDC (10 seconds max)
10mA resolution
1.6ft (50cm) connector cable
Includes one 12V A23G battery

The ET30A is a Automotive Circuit Tester. Ideal for checking circuits, fuses, switches and wiring on automobiles, trailers, boats, motorcycles and other low voltage systems. Tests DC Voltage from 6 to 24V. CE certified with a one year warranty.

Features:

Ideal for checking circuits, fuses, switches and wiring on automobiles, trailers, boats, motorcycles and other low voltage systems
Tests DC Voltage from 6 to 24V

Terminal Shutter Interlock Mechanism Prevents Wrong Operations
11 Functions
Heavy Duty Rubber Holster
Data Hold, Auto Power Off
Measurement of Duty, Ignition Frequency, Ms - Pulse Width, RPM & DWELL

Features:

Ignition Frequency 0.1 Hz 20 KHz
Pulse Width 0.1 999.9 ms
RPM 2STR : 300 19999 rpm
DC V 20V / 200V
AC V 20mA / 200mA
Resistance 200
Frequency 2 KHz / 20KHz
DWELL 1 / 2 / 3 / 4 / 5 / 6 / 8

ET40 Heavy Duty Pen Style Continuity Testers. Ideal for checking continuity of non-energized circuits, fuses, switches, relays and wiring. 30-Inch test lead with alligator clip. CE approved, one year warranty.

Features:

Ideal for checking continuity of non-energized comonents, fuses, switches, relays, wiring and circuit boards
Features 30" (76cm) Test lead with alligator clip

MI 3205 TERAOHMXA 5KV
MI 3205 TeraOhm XA 5kV is a portable battery (Li-ion) or mains powered test instrument with excellent IP protection (IP65 case closed and IP54 case open), intended for diagnosing of Insulation Resistance by using high test voltages of up to 5 kV. It is designed and produced with the extensive knowledge and experience acquired through many years of working in this field

Features:

nsulation Measurement;
Diagnostic Test (PI, DAR, DD);
Step Voltage Test;
Withstanding Voltage Test (DC) up to 5 kV;
Voltage and frequency measurement up to 550 V TRMS.
Insulation resistance up to 15 T;
Adjustable test voltage (50 V.5 kV) 50 V and 100 V step;
Programmable timer;
Capacitance measurement;
Charging rate for capacitive load < 1, 5 s / F at 5 kV;
Automatic discharge of test object after completion of measurement;
Guard terminal;
High voltage breakdown detection;
Custom defined tests;
Auto adjustment function;
Measurement results in numerical and graphical form;
PC software HVLink PRO for downloading and analyzing of the test results and test report printing;
Isolated RS232 and USB communication ports, BT interface;
High quality accessories including shielded test leads in standard set;
High EM interferences protection: Input AC current noise rejection (1 mA@300 V) and additional averaging of the result (5, 10, 30, 60);
CAT IV / 600 V;
Increased working nominal altitude to 3000 m;
High power Li-ion battery pack (14.8V, 4.4Ah);
Mains and rechargeable battery power supply.

MI 2088 EARTH INSULATION TESTER

Multifunction, digital measuring instrument for testing of earthing and lighting protection systems, PE conductor continuity testing and DC insulation resistance measurement on low voltage electrical installations in accordance with EN 61557.

Features:

Measurements on earthing and lightning protection systems include: standard 4-wire method, standard 4-wire method with current clamps and 2-clamp method without junctions disassembling.
Specific earth resistance (soil resistance).
DC insulation resistance measurement with test voltages from 50 V up to 1000 V in 10 V steps. Measuring range up to 30 GW.

Model:MI 3394

The MI 3394 CE MultiTesterXA is a portable instrument intended for electrical safety testing and CE certification of electrical appliances, machines and switchboards during the production. The PC software MES-Manager enables the upload of automated test sequences, projects, downloading of test results to the PC, automatic data storage into a file and printing of test reports. Due to selected test functions, durable construction and accompanying PC SW package CE MultiTesterXA is the perfect instrument for electrical safety testing in the most demanding environments like laboratories, automated production lines or specialized workshops.

Features:

High Voltage, programmed (AC/DC).
Continuity tests.
Insulation resistance measurement.
Substitute leakage current.
Differential leakage current.
Touch leakage current.
PE-leakage current.
Discharge time.
Functional test (power P/S/Q, voltage, current, cos, frequency, ThdU, ThdI, PF).
Data management: the instrument features in unique user friendly data management facility and state of the art memory organizer.
Multiple test terminals: different test terminals enabling the user to chose from performing single tests or autosequences from single test socket.
Support for Test Adapter: A 1460 CE ADAPTER enables execution of auto tests from single test terminal.
MicroSD: support for microSD memory card (8-GB supplied with the instrument) up to 32GB.
Colour display: 3.4colour LCD display with touch screen.
Hi-pot: high voltage AC (5kV at 500VA) and DC (6kV) test.
Continuity: 4 wire continuity test with selectable test current (0.2 A, 4 A, 10A, 25A) enabling precise measurements.
Communication: 4 RS232, USB, Ethernet and Bluetooth communication ports enabling downloading, uploading and remote control over instrument.
Multi-system testing: the instrument can be used on TT, TN, IT and 115 V supply systems.

BR50 is a Video borescope and camera tester with a 17mm camera diameter and 2.4 in. Color TFT LCD Monitor. Can also test installed surveillance cameras for correct target alignment. Applications include: Home inspection: Inspect in walls for mold, insect infestation, electrical wire or water pipe location; HVAC: Inspect inside ducts, behind motors and compressors; Automotive: View inside or around engines and transmissions; Government: Safety and security inspections; Industrial: Inspect weld integrity, process equipment, gears, molding machines; Aerospace: Aircraft inspections for contamination, debris, cracks or other damage. Comes complete with rechargeable Lithium battery, and Universal AC adapter and charger with USB cable.

Features:

17mm diameter camera head with 39" (1m) flexible gooseneck cable retains configured shape
Four LED lamps with five brightness levels illuminate the viewed object
Glare-free close-up field of view with 480 x 234 pixel display
Automatically detects NTSC and PAL cameras
Complete with rechargeable Lithium battery, and Universal AC adapter/charger with USB cable

Models :UT583, UT585, UT586

UT580 Series is a digital RCD tester which adopts intelligent micro controlling chip as the core and is equipped with full-purpose protection circuit design. It is used for measurements of operational current and trip time of leakage current protection switch, as well as connection check.

Features:

It has functions such as phase selection, remote controlling measurement, over-temperature detection, , connections check. It has high precision, stable performance, simple, safe and reliable operation. It is widely used in houses, schools, electric power, manufacturing, smelting and chemical industries. It is an ideal tool for leakage current protection switch' s producing, assembling, checking, and repair.

Model : UT273, UT275, UT276A , UT278A

UT270 series can measure the grounding system of a circuit without disconnecting the ground wires and auxiliary electrode. It clamps the grounding circuit and measures the grounding resistance fast and safely.

Features:

It can measure resistance as low as 0.01 ohm and has a high resolution of 0.001 ohm . It has overload alarm function, which can help to setup the alarm value within the ranges. The clamp has double insulation, which strengthens the anti-interference.

model :vdw-2065
veer make digital iron loss tester vdw-2065 is portable & easy to use instrument which is very useful to find watt loss of electrical steel immediately. Internationally accepted standard method of testing is epstein frame method but that method needs 30mm x 305 mm size & min. 250g weight of material. Stamping, laminations can not be tested on epstein frame because of size. So, we have designed a direct reading type single sheet tester called digital iron loss tester vdw-2065 which provides very fast testing of final products like stamping, ei & other laminations etc.

features:

direct measurement of watt/kg
immediate testing of specimen
user friendly operation
testing up to 0.65mm thickness
testing for 1.0 - 1.8 tesla induction
testing up to 19.00 watt/kg
portable size, easy handling
ultra glow red led display
iso 9001:2008 compliance

Model:VCT-01
VEER make Toroidal Core Tester VCT-01 is portable & easy to use instrument which is very useful to measure AC magnetic properties of Electrical steel of Toroidal core of different grade and size. We provide Free Computer software along with VCT-01 so, you can create test report of test specimen in computer.

Features:

Direct Measurement of Watt/kg, AT/cm & Induction
Tampere proof calibration
Small in size
20 x 4 Bright LCD Display
Easy to use
Hold Facility
Inbuilt memory
Computer interface
Free software to generate test report
Modification as per customer requirement

The MOTWANE make HV TEST SET (MOT-HTS) are used to verify the quality of the insulation between the conductor & its insulation or enclosure .we have different models with range of output voltages from 5KV to 70 KV AC/DC. The MOTHTS comes with adequate cooling systems like air/oil cooling depending upon the ratings.There is HRC fuse protection is provided for control circuits. Bright LED indicators are provided for indicating input /output status. It is having one knob control to vary output VOLTAGE. The mode of operation is manual or motorized The digital / analog KV meter, mA meter is provided for proper measurements. Zero interlocking facility is provided for safety Power utilities, motor, generators transformer, cables, bus bars are the application areas of the H.V. testers.

Features:

Digital/ analog meters for display of voltage & current

Built in Digital Timer for measurement of tripping time

Output voltmeter is with memory effect, in case of failure of supply or tripping

The voltmeter continues to show the reading at which the supply fail**

The leakage current range is upto 100mA

Equipment with compact units for above easy operations

Designed to offer continuously variable output voltage

Various models for AC, DC, & AC/DC voltage

Fast acting over current protection for overloads

Customization as per customers requirements.

UT 650 series lamp tester is a kind of multifunction portable lamp tester. It can be used for excitation and continuity test of energy saving lamps, fluorescent lamps and inert gas lamps.It can test the continuity of incandescent light bulb. It has flashlight function. It is the ideal tool of testing and maintaining the indoor&outdoor lamps.

Features:

It can test the continuity of incandescent light bulb. It has flashlight function. It is the ideal tool of testing and maintaining the indoor&outdoor lamps.

ANALOGUE DISPLAY
METAL BODY
HAND DRIVEN
INSULATION TESTER
Hand drive Insulation Tester is used for measuring insulation resistances of various electrical machinery, Control Panels, Switching Equipment, Insulators Cables, Wiring and various other devices ranging from Small Electrical Units to Large size Transformers. The instrument conforms Is: 2992:1980.Types & Ranges : Testers are available from 50 Volts on wards to 5000 Volts, Tester can also be supplied with a metal flap over the glass window for protection of glass, Fold back handle can provided on request, Dual range also available on request.

Features:

100 VOLTS
10 Mega Ohms - WI 101
20 Mega Ohms - WI 102
50 Mega Ohms - WI 103
100 Mega Ohms - WI 104

model :vet-1608
veer make digital epstein tester vet-1608 is complete stand alone instrument to measure ac magnetic properties of electrical steel of all grade and gauges mostly. It refers astm-343 standard. It also refers iec 60404-2 & is:649. Epstein frame method is standard & worldwide accepted method to test important magnetic parameters like watt/kg, va/kg, magnetizing force, permeability, form factor etc on different induction.

we provide software " veer communication tool" along with vet-1608 which communicates with vet-1608. You can create test report of test specimen in provided ms excel format. This report indicates results & graph of watt/kg, va/kg, ac & peak magnetizing force, ac & peak permeability, form factor etc at different induction which are useful to evaluate material properties and saturation point for specific induction. Hysteresis curve (b/h) facility may also provided in vet-1608 on request.

features:

better accuracy then required by different standards.
accurate sine wave with negative feedback.
20 x 4 line lcd display to display parameters.
usb and rs-232 port for computer interfacing.
free software for test report.
tamper proof calibration.
automatic over voltage shut down.
automatic over current shut down for amplifier.
fuse protection for over current condition
stable source 16v - 8a (optional 24/32v - 12a).
small in size
b/h curve measurement (optional on oscilloscope)

The CT20 is an electronic tool for electricians, alarm, cable installers and others who routinely need to check circuits for continuity and also identify cables and wires. It allows a single user to quickly identify and label two wires even when the wire ends are located in different rooms. It can accommodate test wire lengths up to 10, 000-feet (3, 000 meters), 26-gauge minimum. The CT20s Remote Continuity mode allows the user to check continuity and to identify two or more cables/wires simultaneously.

Features:

A bright flashing LED and loud pulsating beeper indicate local continuity
Remote continuity with the use of the remote probe
Flashing remote probe - two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time
Lightweight and pocketsized, clips on and hangs from the cable(s) under test without falling off
Great for Electricians and Helpers, Cable TV and Audio System Installers, Alarm Technicians, Plumbers, HVAC Installers etc.

MODEL :4671
10MICROA Ultra High Resolution
Large Conductor Diameter (30mm)
AC Current in 5 Ranges (40mA, 400mA, 4A, 40A, 60A)
Wide Frequency Response (40Hz-1KHz)
ACA, ACV, OHM and Continuity

Features:

Large 3 3/4 Digit LCD (4000 Count)
40 Segment Fast Bargraph Display (20 times/sec.)
Data Hold and Max / Min Hold
Relative Measurement
600 Vrms Overload Protection in Resistance Range
Jaw Opening Cable Dia. 30mm. max.(approx)
Display is Manual
Low Battery Indication
Sampling Time 3 time/sec. (Display) 30 time/sec. (bargraph)

MODEL :4680BL, 4680BLC
Non Contact Ground Resistance Measurement
No Auxiliary Electrodes Needed
Data Storing Memory
Data Hold, Noise Signal
Ground Resistance Measurement 0.010 - 1000
Leakage Current (0.5mA - 30.00 A) (Model 4680BLC)

Features:

Suitable for Earthing Strip of 65mm x 32mm
Jaw Opening 65 x 32 mm Approx.
Auto Ranging, Overload Indication, Low Battery Indication
Continuity Loop Test, Configurable Alarm, Auto Power Off
Display 4 Digit 9999 counts LCD

3-1/2 Digit ( 1999 Counts) LCD Display
Auto Power Off Function (after 5 min)
Low Battery Warning Indication
Capable of Measuring Earth Voltage (0 - 20 V AC)
Small, Light Weight & Portable
Extremely Simple to Operate Connect - Press - Read

Features:

Designed to Reject High Levels of Noise & Interference
Designed to Generally Confirm to IS10656 -1983
Range Selection & Single Person Push Button Operation Switches
Two Ranges for Earth Resistance Measurement
Functions Icons on Display
Battery Operated
IEC 1010 CATIII 200V
Sturdy, Elegant & Compact Body

MODEL : DIT99 SERIES
3 1/2 Digit 17mm LCD Display
High Accuracy +/- (3% rdg + 2 dgt)
Single Person Push Button Operation
Designed to Generally Conform to IS 10656-1983
Meets Requirement of IEC1010, Installation Category II, 100V Phase -Earth
Terminal Voltage : >85% of Rated Voltage for Insulation
Resistance Measurement from10% to 100% of the Insulation Resistance Range
5 Models with various Voltage & MOhm Ranges

Features:

Ideal for Insulation Resistance Measurement of Electrical Equipment (Motors, Transformers, Machines, etc), Electrical Cables for Distribution Networks, Cables for Commuinication Networks, House Hold Appliances (Washing Machines, Mixer, Toaster, etc), Industrial, Commercial & Resisdential Installations

The Extech BT100 is a Battery Capacity Tester. Product can be used to test the condition of batteries quickly and easily. As an AC milliohm-meter, the tester measures DC voltage and AC resistance while the battery is in use, helping to save time on repetitive testing trials or large quantities of batteries.

Features:

On-line testing without shutting down battery
Built-in datalogger stores up to 999 tests
Simultaneously measures battery resistance and voltage
PC software for downloading readings to a PC

More than 64 Electrical Parameters on 27 Pages
3 Phase 3 Wire / 3 Phase 4 Wire (Factory Set)
Complete with Standard Accessories
Programmable CTR & PTR, Instr. Address, Password & MD Period
Coloured Input Terminals for Phase Identification
Software Support for Datalogging, Tabulation & Graphs
Built-In 20 Energy Meter of * Digit Resolution
Clamp-On CT's for Current Input
TRMS Measurement
Full Annunciators on Display
Rugged & Portable Casing
RS 485 Port, 5kV Isolated Port (Standard)

Features:

Max. Demand, THD, Password Protection & Auto Scroll Facilities
Energy Retention & Energy Reset Facility
*Additional features for EATMFM96UMTP
Front Key Pad Lock
Run Hours
On Hours
RPM
Interruptions
TOU (Energy, MD)
Shows Current Date & Time

The 480403 Phase Sequence and Motor Rotation Tester has a 40 to 600-Volt rated range for testing phase orientation of 3-phase power sources over a 2 to 400Hz frequency range. LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each of the phases is live. In addition, it indicates rotation direction of the motor to ensure that it doesn't get damaged from incorrect wiring. Meter comes complete with cable and three large color coded alligator clips, pouch case, and 9V battery.

Features:

Indicates rotation direction of the motor
Determine rotation of a motor without contact
LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each of the three phases is live
Double molded durable housing
Easy to use alligator clips with wide jaws

The CB10 is an AC Circuit Breaker Finder/Receptacle Tester that locates circuit breakers and tests receptacle wiring. The CB10 allows the user to quickly locate 110 Volt to 125-Volt AC circuit breakers and fuses with audible and visual circuit breaker indication. The product also features a variable sensitivity adjustment to pinpoint correct circuit breaker. This product is complete with a year warranty, the receiver and GFCI transmitter and a 9V battery for the receiver.

Features:

Quickly locate 110V to 125VAC Circuit Breakers and Fuses
Variable Sensitivity adjustment to pinpoint correct circuit breaker
Bright Red and Green LEDs indicates if receptacle is correctly wired or six fault conditions
Push button GFCI test
Audible and visual circuit breaker indication
Convenient storage position for transmitter/receptacle tester
Eliminates circuit interruptions

Measures the thickness of ferrous and non-ferrous substrates
The CG104 is a pocket-sized coating thickness tester which offers quick one-handed operation and non-destructive measurements of the thickness of ferrous and non-ferrous substrates. Its unique reversible display allows you to take readings in challenging angles of area being measured, plus it has an easy-to use menu system and backlit display feature. Built-in memory stores/recalls up to 255 readings. Complete with two AAA batteries, calibration standards (one ferrous plate, one non-ferrous plate and one standard coating plate film), wrist strap and soft case.

CE 1 Year Warranty

Features:

Dual Technology provides automatic recognition of ferrous (iron and steel) and non-ferrous (copper, aluminum, zinc, bronze, brass, etc) substrates
Magnetic induction for ferrous substrates
Eddy current measurement for non-ferrous substrates
180 reversible LCD display with LED backlight
Store/recall up to 255 measurements
Audible high/low limit alarms
Substrate Zeroing and two-point calibration function
Record/Recall Min/Max/Average readings
Auto-Hold freezes the reading on the display
Auto power off and low battery indicator
Complete with two AAA batteries, calibration standards (one ferrous plate, one non-

Model:VAW-95
VEER make Analog Iron Loss Tester VAW-95 provides easy & fast measurement of iron loss of electrical steel of 0.5mm CRNO. Put test specimen on yoke type probe and see iron loss (Watt / kg) on front mounted Analog Meter immediately.

Features:

Direct measurement of Watt / kg
Analog meter for easy reading
Very useful for 0.5 mm CRNO Steel
Measurement Up to 9 Watt/kg
ISO 9001:2008 Compliance
Portable & easy to operate

Model 10K-PI is a diagnostic insulation tester having test voltage range upto 10KV; an Indigenous MOTWANE designed to conduct automatic diagnostic tests on high voltage equipments like Transformers, Cables, Bushings, Switchgears & rotating machines. 10K-PI is microprocessor based instrument deploying latest technology & very high speed data sampling to give correct, repetitive readings & quality performance under harsh electrical conditions. It has wide insulation resistance range up to 20T ohm.The Information displayed on large backlit LCD display includes insulation resistance, leakage current, capacitance, battery status & timer. Three programmable timers are provided to conduct various tests like Polarization Index (PI), Dielectric Absorption Ratio (DAR), Dielectric Discharge (DD), Step Voltage (SV), & breakdown Voltage (BDV) test.10K-PI can store 1000 test results. PC interface via USB & RS232for data transfer. The software for report generation & data trending analysis helps to keep records of capital equipments.

Features:

Automatic diagnostic test modes of Insulation measurement., PI, DAR, DD and Step Voltage test

Mains and battery operation modes

Three programmable time T1, T2 &T3

Available Diagnostic modes IR, PI, DAR, DD, Step Voltage, BDV & Burn

Programmable Test voltage from 500V-10KV

Insulation Resistance Range from 1K Ohm to 20T Ohm

Mains & Battery operation

1000 test data storage

RS 232 & USB Port

Software for data trending analysis

AC/DC voltage measurement upto 600V

Auto calibration as every start up

The Motwane IT-51 is a microprocessor based Digital Insulation tester designed for testing of all types electrical installation like transformers, switchgear, motors, generators and utility substation equipment. The instrument automatically performs Polarization index by selecting PI mode. IT-51 has a large LCD blue backlit display, it shows leakage current in scrolling form along with IR value and PI value. It is rechargeable battery operated and AC mains provision for battery charging.

Features:

Selectable test voltage from 250V, 500V, 1000V, 2500V, 5000V DC.

Insulation Resistance measurement up to 1 TOhm

Polarization Index measurement facility Short circuit current < 1.4 mA. approx.

AC/DC voltage measurement up to 600V.

Two Programmable timer from 0 Sec to 99 minutes.

Liquid Crystal Display with pleasant blue backlit.

Internal rechargeable Battery.

Safety - IP 54, CAT IV 600V and CE conformity.

Robust ABS body with self-carrying handle for easy portability.

Automatic discharge for capacitive circuits.

Guard terminal to minimize the surface leakage.

The MOTWANEs multipurpose tester Model MIRT-61 is a Versatile, battery operated Digital insulation tester with true RMS industrial grade multimeter features best suited for industrial preventive maintenance. With test voltage range up to 1KV , highest insulation resistance range of 6G Ohm and multi featured function of RMS multimeter (i.e. AC/DC 1000V) ; makes it a superior offering for Industry and Service segment. It is designed predominantly for low voltage insulation resistance testing in maintenance and services, which involves the applications like Cables/Wires, Rotating Machines, LT transformers, Switchgears and Industrial installations. It is designed to suit the extreme environment conditions. Save your operating cost and test more with this single box design rather buying two different products.

Features:

Multipurpose model with IR testing and multimeter functions factility

Wide IR range up to 6G Ohm , suitable for all LT application

Selectable voltage facility 50, 100, 250, 500 &1000V

Maximum test current of 1mA

Industrial Grade True RMS Multimeter functions

Voltage Measurement up to 1000V AC/DC

Dual Display LCD with Amber backlit

Auto power off facility, Reading Hold / Lock, Min/Max, FLT ( Filter )

Ideal for Insulation Resistance Measurement during maintenance for Electrical Equipments (Motors, Transformers, Machines, Switchgears etc.)

Electrical Wire/Cables for Distribution Networks

Control Panels

Electrical Contractors

Industrial, Commercial & Residential Installations

Railways applications & Telecom applications

The Motwane had been offering comprehensive range of products designed in-house catering multiple segment of power and energy sector. Being pioneer in insulation testing the IT250G SPOT is a 5KV voltage selectable digital insulation tester measures digitally and also in analog. It is a battery operated most compact device made to give stable and reliable performance in energy intensive area. Auto power off enhance battery life and pleasant amber backlit allows user to work in dusk environment also. It is ideally suited for many troubleshooting, installation & commissioning in electrical Substations and preventative maintenance on both domestic & industrial applications. IT250G is an ideal suited for onsite testing.

Features:

Most comfortable ergonomics with strap.

Selectable test voltages from 250V, 500V, 1000V, 2500V, 5000VDC.

Insulation Resistance measurement up to 250G Ohm.

Continuity measurement.

Programmable timer from 1 sec .to 99 minutes.

Short circuit current :

The VT30 is a voltage, continuity and phase tester with built in flashlight and backlit digital display with bar graph. The tester features a double molded IP64 housing, polarity detection with LEDs for positive and negative DC and a CAT III 600 Volt / CATIV 600 Volt safety rating. This product is complete with a one year warranty, 2 AAA batteries, protective cap, and pouch case.

Features:

Large backlit LCD display
AC voltage (0 to 480V) and DC voltage (0 to 690V)
Polarity detection with LEDs for positive and negative DC
Continuity Test with audible tone
Phase rotation test for motors
Two handed operation for low impedance testing
Built-in flashlight for testing in tight areas
Rubberized double-molded IP64 housing

Automotive Current Tester with ATC-blade connector
AUT20 is an Automotive 20A Current Tester and ATC Fuse. The ATC-blade connectors plug directly into the fuse block for ease of use. Measuring range from 20A/48VDC (10 seconds max), 10mA resolution. Includes one 12V A23G battery.

Features:

ATC-blade connector plug into the fuse block
Measuring range: 20A/48VDC (10 seconds max)
10mA resolution
1.6ft (50cm) connector cable
Includes one 12V A23G battery

The ET30A is a Automotive Circuit Tester. Ideal for checking circuits, fuses, switches and wiring on automobiles, trailers, boats, motorcycles and other low voltage systems. Tests DC Voltage from 6 to 24V. CE certified with a one year warranty.

Features:

Ideal for checking circuits, fuses, switches and wiring on automobiles, trailers, boats, motorcycles and other low voltage systems
Tests DC Voltage from 6 to 24V

Terminal Shutter Interlock Mechanism Prevents Wrong Operations
11 Functions
Heavy Duty Rubber Holster
Data Hold, Auto Power Off
Measurement of Duty, Ignition Frequency, Ms - Pulse Width, RPM & DWELL

Features:

Ignition Frequency 0.1 Hz 20 KHz
Pulse Width 0.1 999.9 ms
RPM 2STR : 300 19999 rpm
DC V 20V / 200V
AC V 20mA / 200mA
Resistance 200
Frequency 2 KHz / 20KHz
DWELL 1 / 2 / 3 / 4 / 5 / 6 / 8

ET40 Heavy Duty Pen Style Continuity Testers. Ideal for checking continuity of non-energized circuits, fuses, switches, relays and wiring. 30-Inch test lead with alligator clip. CE approved, one year warranty.

Features:

Ideal for checking continuity of non-energized comonents, fuses, switches, relays, wiring and circuit boards
Features 30" (76cm) Test lead with alligator clip