Measuring Instruments & Equipment #3796827

MI 3295 STEP CONTACT VOLTAGE MEASURING SYSTEM
MI 3295 Step Contact Voltage Measuring System is a voltage measuring system for testing and verification of protective earthing of power stations, substations and other power systems.

Features:

Measurement of step voltage and contact voltage.
Measurement of earthing resistance with resolution of 1 m.
Measurement of specific earth resistance.
High accuracy of the measurements due to a high current of up to 50 A and effective suppression of noise.
Excellent immunity even against changing earth currents.
Autonomous Step Voltage meter: no need for long voltage leads.
Low weight.
High safety due to low output voltage (55 V).
Downloads test results directly to the PC with the help of the profes-sional PC SW package HVLink which enables analysis and documenta-tion of test results.

MI 2230 VAFMETER
MI 2230 VAFMeter is handheld multifunction instrument which can accurately measure voltage, current, power, harmonic distortion and phase angles in single, two and three phase systems.

Features:

TRMS Two channel voltage measurements, up to 600 Vac
TRMS Two channel current measurements, up to 3000 Aac
U-U, I-I, U-I angle measurement, phase diagram
Support for three-phase (Aaron) systems
Continuity/resistance of conductors with 200mA test current with polarity change and with pass/fail functionality
Simultaneous measurement and display of voltage, current phase angles and frequency on two or three-phase systems
Accurate phase angle measurement at low current levels
Easy to use: large bright LCD display and large buttons enable easy handling of the instrument
Memory storage for storing up to 1500 measurements
Safe: built for CAT II / 600V environments
Portable: rugged carrying case with a handle and lightweight design enable easy moving the instrument between sites.
Built in charger & rechargeable batteries: instrument has a built-in charging circuit and comes with a set of rechargeable NiMH batteries.
Downloadable: downloads test results via RS232 or USB cable directly to the PC with the help of the Metrel EuroLink software.

Extechs AN25 pocket-sized Heat Index Anemometer Pen not only measures Air Velocity, but also monitors Heat Index during hot humid days to prevent heat stroke during outdoor activities, sporting events or, indoor workplace. Its pen-sized design makes it convenient to fit into your pocket and carry it wherever you go. Complete with CR2032 battery.

Features:

Built-in multiparameter sensors measure Air Velocity, Heat Index, Wet Bulb Globe Temperature (WBGT), Humidity, Ambient Temperature, Dew Point, Wet Bulb, Temperature, and Windchill
MIn/Max/Average (5sec/10sec/13sec)
Data Hold, Auto Power Off with disable
Replaceable Mini impeller (vane)
Complete with CR2032 battery

The Power Guard has a smart socket consisting of an energy metering ASIC and a large LCD. It displays various electrical parameters such
as W, PF (PG08 only), mA, V, Hz, min., kWh and CO2. It is useful in monitoring energy quality consumption and carbon emissions.
Displays W, PF (PG08 only), mA, V, Hz, kWh and CO2.
Display Energy Usage Time (min.)
Blinking LCD to indicate Alarm when kW is over threshold

Features:

Accuracy : Class 1.0
Power Consumption : Less than 1W
Input : 220V, 50Hz, 2.5 10A (max.)
Working Temperature : 0C to +45C
Large LCD Display with Backlight
Counts CO2 generated by electrical equipment (0.555kg CO2 is generated by using 1kWh Energy)

Model : UT620A and UT620B

Testing the resistance of metal coating, electromotor, and the winding resistance of small-sized transformer. Point of junction of earthing system; the integrity of welding contact; breaker and switch; the connection of space craft and the track; amphenol connector and conductor jointing; multi-cell battery; the generatrix of switch board; contact resistance of component like relay; metallic material; conductor resistance of wires and cables; the ground resistance of the PEM LK of vessels, vehicles and aircrafts.

Features:

Tesing 10A to increase the accuracy
The minimum resolution 1 u ohm
Bacis accuracy: 0.25%, four-wire testing
Top and bottom testing, making it convenient to classify component, and judge automatically whether the object is standard or not
Unique function of designing wire length, the unit meter and inch can be changed freely
Chargable battery inside, long working life
The data can be storage, read, and deleted. Data storage is 1000
USB interface.

I-V Curve Test for Solar Panel / Module / Cell
Max. Solar Cell/Module Power / Cell Power(Pmax) search by Auto-Scan
Capability: 60V, 12A
Best Resolution: 1mV , 1mA
Manual Single Point I-V Test
Max. Voltage (Vmaxp) at Pmax
Max. Current (Imaxp) at Pmax
Voltage at Open Circuit (Vopen)
Current at Short Circuit (Ishort)
I-V Curve with Cursor to Display each Data Point
Efficiency (%) Calculation of Solar Panel
Real Time data logging
RS232C (to USB Bridge) Cable for PC
Communicate with PC via USB Cable
AC Adaptor and Rechargable Lithium Battery
Memory Size : 100 Records
Sampling Time of Data logging : 0 99 min
Large LCD with Backlight
Applications Quality Control at Production Line, Warehouse or Site of Installation, Identify Requirements of Solar Power System, , Maintenance of Solar Panels, Verify the Best Installation Angles of Solar Panels, Research and Development

Features:

DC Voltage Measurement 0 - 60V DC Current Measurement 0.01 - 12A
AC Adapter AC 110V or 220V input, DC 15V / 3A output
Environment 5C 50C, 85% RH (Operating)
-20C 60C, 75% RH (Storage)

380460 is a Precision Milliohm Meter. High accuracy and performance for low resistance measurements. Portable milliohm meter provides resolution to 0.1m. Compact, durable field service housing with protective cover. Manual zero display adjust and overrange indication. Complete with 4-wire cables with Kelvin clip connectors.

Features:

High accuracy and performance for low resistance measurements
Large 0.7" (18mm) LCD 1999 count
4-wire cables with Kelvin clip connectors
Manual zero display adjust
Overrange indication
Compact, durable field service housing with protective cover

The EC510 is a conductivity testing kit. Kit includes EC500 meter, 3 calibration standards, 3 pH buffer pouches plus rinse solution, 3 cups, batteries and carrying case. Measures 5 parameters including conductivity, TDS, salinity, pH and temperature using one electrode. Analog bargraph indicates trends. Memory stores up to 25 labeled readings. Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio. CE certified.

Features:

Kit includes: EC500 meter, 3 calibration standards, 3 pH buffer pouches plus rinse solution, 3 cups, batteries and carrying case
Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
9 units of measure: pH, S/cm, mS/cm, ppm, ppt, mg/L, g/L, C, F
Analog bargraph indicates trends
Memory stores up to 25 labeled readings
Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio
RENEW feature alerts user when electrode needs replacement

Model : MIC-30

nsulation resistance measurement:
selected test voltage: any voltage in the 50-1000 V range with 10 V step,
automatic measurement in sockets with the UNI-Schuko adapter with possibility of configuring pairs of measured cables,
continuous indication of insulation resistance or leakage current,
automatic discharge of capacitance of tested object after the insulation resistance measurement,
acoustic signalling of five-second periods to facilitate obtaining time characteristics,
measured test times T1, T2 i T3 to measure one or two absorption coefficients in the 1-600 sec. range,
indication of actual test voltage during the measurement,
protection against measuring live objects,
three-lead measurement.
Continuity measurement of protective and equipotential conductors according to EN 61557-4 with the >200 mA current
Low-voltage circuit continuity and resistance measurement:
circuit resistance measurement (

Model No.:MIC2505

NSULATION RESISTANCE MEASUREMENT UP TO 2T IN ACCORDANCE WITH IEC 61557-2
Insulation resistance measurements:
selectable measurement voltage 500, 1000 V or 2500 V,
continuous indication of measured insulation resistance or leakage current value,
automatic discharge of measured object capacitive voltage after the completion of insulation resistance measurement,
acoustic signaling of 5 seconds time intervals to facilitate capturing time characteristics,
metered T1, T2 and T3 test times (15, 60 and 600 s or 30, 60 and 600 s) for measuring two absorption coefficients (DAR, PI, Ab1, Ab2),
indication of actual test voltage during measurement,
protection against measuring live objects.
Insulation resistance measurement method for two-and three-wire.
Measurement of leakage current during insulation resistance testing.
DC and AC voltage measurement in the range of 0-600 V.
Power supply from battery packs.
The instruments meet the requirements of the EN 61557 standard.

Features:

Measurement of short circuit loop impedance ZL-PE, ZL-N, ZL-L
Test current: 23/40 A; measuring range acc. to IEC 61557
Measurement of earth resistance RE with the 3p and 4p method
test voltage: 25 V or 50 V rms
test current: 20 mA, sinusoidal rms 125 Hz (for fn=50 Hz) and 150 Hz (for fn=60 Hz)
measurement blocked at interference voltage UN > 24 V
maximum measured interference voltage Unmax= 100 V
maximum resistance of auxiliary earth electrodes

Model : UT243

UT240 series is a stable, safe and reliable handheld power and harmonics clamp meter, which combines with digital ammeter, power measurement, harmonic measurement and equipped with a powerful measurement and data processing software.

Features:

It is suitable for testing, calculating, displaying voltage, current, active power, power factor, phase angle, apparent power, reactive power, harmonic analysis and test, electrical energy, frequency etc. Its harmonic measurement can be measured to 20 times.

Model : UT253A/UT253B

UT253 series is specially designed for AC leakage current, current and voltage measurement, which adopts latest CT techniques and digital integration technology.

Features:

It has large jaws of 80mmX80mm, which can clamp 96mm cables or flat-steel ground wires. It is fully automatic, can test one circuit of leakage current and three circuits of voltage, as well as display them on one screen simultaneously.

Model : UT258A

UT258A is well designed for on-line measurement of DC/AC leakage current and current below 600V, which adopts latest CT and digital integration technology.

Features:

Slender clamp is very suitable for places full of concentrated cables (such as, electric power metering system, high-speed rail system, automobile circuit maintenance and so on). Non-contact measurement ensures operation safety. The meter has mini shape with high accuracy, stable performance and perfect functions.

The compact Extech 380941 is a 200 Amp mini AC/DC clamp meter with a small diameter jaw designed to reach in small areas while providing 10mA resolution (DC) and very low-current sensitivity. This mini clamp meter is useful for troubleshooting tasks in plant maintenance, electrical, HVAC, and telecom work, as well as home electrical, fleet maintenance, marine, and motorcycle repairs. The 380941 has a CAT III 300-Volt safety rating and a one year warranty. Comes with batteries and manual.

Features:

0.9" (23mm) jaw opening
High resolution to 10mA AC/DC
Voltage, Resistance, and Frequency
Fast 40 segment bargraph
One touch Auto Zero for DC Current measurements
Min/Max, Data hold and Auto power off

10 Parameters on 10 Display Pages
Measures V, A, PF, Hz, KW, KVAr, KWh, KVAh and KVArh
Auto / Manual Scroll Display (User Selectable)
SMPS Power Supply (85 - 26vac / DC)
Ideal for Testing of Electrical Appliances
User Programmable CT Ratio (1.00 - 99.99) for EM - 08S (1A/5A)
TRMS Measurement
4 Digit LCD Display with Backlight (20mm Digit Height) LED
Indicator for Parameters Indication
RS 485 Port (5KV Isolated) (Optional)
MODBUS RTU Protocol (Optional)

Features:

Application
Home Appliance Testing
Energy Audit Testing
QC
Studying Energy Efficiency of Electrical Equiptment
Building Management - System, Power Management
Generator / Motor Characteristics
Plant - Maintenance

The CO100 is a desktop indoor air quality CO2 monitor that measures carbon dioxide concentrations (CO2) from 0 to 9, 999ppm, air temperature and humidity. With user programmable visible and audible CO2 warning alarm. Meter has a maximum/minimum CO2 value recall function. Maintenance free NDIR (non-dispersive infrared) CO2 sensor. Complete with Universal AC adaptor.

Features:

Checks for Carbon Dioxide (CO2) concentrations
Maintenance free NDIR (non-dispersive infrared) CO2 sensor
Indoor Air Quality displayed in ppm with Good (0 to 800ppm), Normal (800 to 1200ppm), Poor (>1200ppm) indication
User programmable Visible and Audible CO2 warning alarm
Measurement ranges:
CO2 : 0 to 9999ppm
Temperature: 23 to 122F (-5 to 50C)
Humidity: 0.1 to 90%RH

Waterproof pocket size with Air Velocity, Temperature and Windchill
The 45118 is a Waterproof pocket sized Thermo-Anemometer for Air Velocity, Temperature and Wind-chill measurements. Simultaneously display Air Velocity and Temperature or Wind-chill on the LCD screen. Selectable averaging function of 5, 10, or 13 second intervals. Fold up protective housing extends to 9 in. (229mm) for a better reach. Tripod mountable. Features Data Hold with Auto power off functions. Complete with battery and 43 in. lanyard.

Features:

Display Air Velocity and Temperature or Windchill
Selectable averaging function of 5, 10, or 13 second intervals
Fold up protective housing extends to 9" (229mm) for better reach
Tripod mount
Data Hold with Auto power off

2 in 1 Automotive Auto Ranging DMM & Power Probe (MAM6120)
3 in 1 Automotive Auto Ranging DMM, Power Probe & Logic Probe
Hands - Free Test Leads for Excellent Convenience

Features:

Flashlight for Operation of Automotive Diagnosis
Auto Range, Auto Power Off, Low Battery Warning & Data Hold

TIC300 is a Thermal Imaging Camera which combines the functions of surface temperature measurement and real-time thermal imaging.
Traditional Thermal Imaging Cameras measure each
component one by one but TIC300 does it together thus saving customer's time. The potential problem is clearly displayed on the color screen which helps customer to quickly locate the
central point and temperature of the problem area.
To improve recognition, this product is equipped with a vision camera. Based on practical requirements, it can turn thermal
image into visional image. Thermal image and visional image can be stored in the memory card. Adjust the images and store them in PC which are used to generate reports or for printing.
After seconds it can be tested. This product is the optimum product for electrician and maintenance personnel. It can quickly find out the problem area.

2.4" Color Displsay
Memory Card : Micro SD Card (installed)
File Format : BMP
Set Control : Unit Adjustment / Language / Date Time Format / Automatic Shutdown
Battery Type : AA x 4 Batteries
Battery Life : 6 Hours
Size : 212 x 95 x 62 (approx)
Total Pixel 3600

Features:

Resolution 60 x 60
Thermal Sensitivity 0.15C
Temperature Range -20C 300C ( -4F 572F)
Image Capturing Frequency 6 Hz
Storage Temperature -20C 50C
Drop Resistance 2m
Vibration 2G
IEC 60068 - 2 - 6
Relative Humidity 10% RH 80% RH

Available in Single Phase Two Wire.Universal Auxiliary Supply 80 to 300V AC/DC.
Bright 4 digit 14 mm LED display.
Push button based site programming of CT & PT ratio.
CT Primary : Programmable upto 9999A.
CT Secondary : 5A/1A (Selectable).
PT Primary Selectable : 110V, 1.1kV, 6.6kV, 11kV, 33kV, 66kV, 132kV, 220kV & 440kV.
PT Secondary Fixed : 110V.Same model for kW & MW.
LED Indication for Mega.
Available in Class Accuracy 1.0 & 0.5

Features:

Electrical Panels - Industrial HT & LT Panels.
Motor Control Centres, Distribution Contol & Relay Panels.
Air Conditioning and Refrigeration Panels.
Genset Panels.Generation, Transmission and Distribution Panels.
Test Benches and Laboratory Equipment.
Uninterrupted Power Supply.

Available in Three Phase, Four Wire.Push button based site programming of CT Ratio.Bright 4 digit 14mm LED Display.Colour indication for R, Y, & B Phases.Universal Auxillary Supply -80 to 300 V AC/DC.kW, kVA, kVAr - Site Selectable.CT Primary : Programmable upto 6550A.CT Secondary : 5A/1A (Selectable).Available in Class Accuracy 1.0 & 0.5

Features:

Electrical Panels - Industrial LT Panels.Motor Control Centres, Distribution Contol & Relay Panels.Air Conditioning and Refrigeration Panels.Genset Panels.Generation, Transmission and Distribution Panels.Test Benches and Laboratory Equipment. Uninterrupted Power Supply.Special OEM Application.

Suitable for 3P, 4W LT Application.
Three line LCD backlit display.Displays:- Voltage, Current & Frequency.
Three push buttons on the front panel for programming and scrolling.
CT secondary -/1A or -/5 A (user selectable).
CT primary can be varied from 5A to 6000A in steps of 5 for -/5A.
CT primary can be varied from 1A to 1200A in steps of 1 for -/1A.
IP 54 degree of protection.
Available in Class Accuracy 1.0

Features:

Electrical Panels - Industrial LT Panels.
Motor Control Centres, Distribution Contol & Relay Panels.
Air Conditioning and Refrigeration Panels.
Genset Panels.
Generation, Transmission and Distribution Panels.
Test Benches and Laboratory Equipment.
Uninterrupted Power Supply.

The SL130G is a sound level alert with alarm for continuous monitoring of sound levels. Ideal for industrial, hospital, auditoriums, schools and other areas where there is a need for being alerted when sound level reaches set points. Bright LEDs (red flashing or green) alert user when sound level is too high or too low - LEDs can be read from 30m (100ft). You can set the SL130 so the RED LEDs flash when the sound level is below the"LO" set point where people in the audience may not be able to hear. When the sound level is above the "LO" set point, the GREEN LEDs indicate the sound level is acceptable. You can reverse the Red and Green LEDs activation per user color preference. Wall, desk or tripod mount with optional 15ft (5m) microphone extension cable for remote monitoring. User settable high or low limit (30 to 130dB) with output to drive external relay module. Meets ANSI Type 2 and EN 60651 accuracy specs - compliant to OSHA. Complete with 100-240V AC 50/60Hz adapter and microphone wind cover. 8 x AA batteries (not included) can be used for monitoring function only without LED alert.

Features:

Wall, desk or tripod mount with optional 15ft (5m) microphone extension cable for remote monitoring
Bright LEDs (red flashing or green) can be read from 100ft (30m)
Continuous monitoring of sound level in 3 ranges: 30 to 80dB, 60 to 110dB, 80 to 130dB
User adjustable high or low limit (30 to 130dB) with output to drive external relay module
Built-in desk, wall and tripod mounts
Meets ANSI Type 2 and EN 60651 accuracy specs - compliant to OSHA
Complete with 100-240V AC 50/60Hz adaptor and microphone wind cover

The 380360 is a 1000V digital tester with an automatic 3 minute test. Three test voltages of 250V, 500V and 1000V. Insulation Resistance to 2000M. Automatic discharge when safety "Press to Test" button is released. Complete with 6 x AA batteries, heavy duty 2.5 ft. (0.8m) test leads, alligator clip, large probe and case with neck strap.

Features:

Three test voltages of 250V, 500V and 1000V
Insulation Resistance to 2000MOhm
Safety Power Lock enables "hands free" operation for 3 minute test
Automatic discharge when safety "Press to Test" button is released
Continuity measurements to 200Ohm and Voltage to 600VAC

Model :VTS-01

VEER make Torque Speed Meter VTS-01 is portable instrument which is very useful to find Output Power, Torque in Kgm, RPM, Corrected RPM, %Slip and Frequency of Motor. It is very simple and easy to use. It measures torque of motor from load cell & RPM from Proximity Sensor which are very useful to find output power of Motor.

Features:

Direct Measurement of Output Power, Torque in Kgm,
Meassures RPM, Corrected RPM, %slip, Frequency also
Suitable for 2/4/6/8 Pole Motors (10 / 12 Pole on request)
Facility to Freeze / Hold the Reading
Rack Mountable as well as Table Top Model
RS-232 For serial Interface with computer (Optional)
TORQUE SPEED METER VTS-01
Easy Load Cell Calibration Facility
16X2 Alpha Numeric High Glow LCD Display
Easy to use

Model :UT601 , UT602 , UT603

UT600 series RCL meter is a kind of 3.5-bit handheld digital meter with stable performance, safety, reliability, high accuracy and manual range. It can be used to measure the magnification times of audion, diode forward voltage drop and circuit continuity.

Features:

UT601has wide capacitance measurement range from 0.1pF-20mF and high accuracy.
UT602 can hold data.
UT 600 series is applicable to testing resistance, capacitance and inductance of electronic laboratory, production line, maintenance point and teaching. It is the ideal tool of maintaining formany users.

Model:CM72 & CM74
The FLIR CM72 600A AC Clamp Meter and the CM74 600A AC/DC Clamp Meter give you better access to wiring in hard-to-reach places, and provide all the measurement capabilities you need for advanced troubleshooting. Made with a narrow jaw and high-powered LED worklights, the CM72 and CM74 make it easier to take measurements in dark, crowded panels and cabinets. Their slim, light design is convenient to carry in your back pocket wherever you go. With advanced electrical features including Autoranging, True RMS Voltage and Current, LoZ, Inrush (CM74 only), VFD Mode (CM74 only), and an input for a flexible current probe accessory, the CM72 and CM74 have all the measurement functions you need to stay competitive and ensure accurate readings.

Features:

Take measurements in hard-to-reach places
Narrow clamp jaw enables access to wiring in crowded panels and cabinets

Work easily through poor lighting conditions
High-powered LED worklights guide you to your target in poor lighting conditions

Carry the clamp with you wherever you go
Slim clamp design, convenient to carry in your back pocket

Provides all the electrical features you need for advanced troubleshooting
True RMS, LoZ, Autoranging, Inrush, Smart Diode with Disable, and Min / Max Hold and Auto Power Off with Disable

Engineering you can have confidence in
Built rugged, and includes features to make troubleshooting easier, like a premium gold-tipped silicone test lead accessory, large digit LCD display with bright backlight, and rubberized double molded hand grips

Expand your meter
Expandable to 3000A AC with TA72 & TA74 Flex Clamp Accessories (sold separately)

The 380580 is a Battery Powered Milliohm Meter. This milliohm meter features a high accuracy, a high resolution, portable milliohm meter battery operated for field use, four terminal Kelvin measurements, and Over-temperature and over-voltage protection. CE certified. Complete with 8AA batteries, and 2 sets of test leads (4 wire with 4 alligator clips and 4 wire with 2 Kelvin alligator clips).

Features:

Four terminal Kelvin measurements
Over-temperature and over-voltage protection
5 ranges with 100?Ohm max resolution
Invalid test indicators prevent inaccurate measurements
Built-in water resistant case with shoulder strap

Model:MR160

The FLIR MR160 is the only moisture meter with the power to show you where to measure the problem. Featuring Infrared Guided Measurement (IGM) technology powered by a FLIR Lepton thermal imaging sensor, MR160 helps you quickly see temperature patterns that point to potential hidden moisture so you know right where to place the meter probe to capture accurate readings.

Flexible 24" (610mm) probe easily wraps around bus bars and cable bundles

Features:

Easily wraps around bus bars and cable bundles
Fast Peak capture (30?s)
Simultaneously displays Frequency with Current or Voltage

Moving Iron Meter of 90 Deflection with Interchangeable Scale Facility
Moving Iron Spring Mounted Jewel Bearing Suspension

Features:

Range
Current (A) : 0 - 1A to 0 - 100A (Direct), Through CT/1A or /5A for Higher Currents
Voltage (V) : 0 - 50V to 0 - 750V (Direct), Through PT for Higher Voltages

Measuring Method TRMS using Microcontroller
1A / 5A Input in same Meter (User Selectable)
High Accuracy Accros the Entire Range
9999 Count High Resolution Display
Dual Aux. 110 V AC and 230 V AC in same Meter

Features:

User Programmable Display / CTR / PTR
Auto Selection of Decimal Point
Auto Indication of KV & KA
Setup / Programmable Protected by Password

6 1/2 Digit Display (11, 99, 999 counts)
12 Different Measurement Capabilities ; DCV / ACV, DCI / ACI, OHM2W / OHM4W, Frequency / Period, Diode Test, Continuty, dB /dBm
High brightness vacuum fluorescent display
True-rms AC voltage and current measurement, bandwidth up to 300kHz
DCV measurement accuracy up to 0.0035%, resolution up to 0.1MICROV
Max. measurement rate : 1000 meas / sec
Equal accuracy frequency measurement up to 1.1 MHz
Relative mode (REL) to eliminate residual reading
2W, 4W resistance measurement mode selectable
Built-in mX +b, %, dB, dBm etc mathematics calculation function
512 reading storage and MAX / MIN / AVER / STD statistics
Up to 30, 000 readings storage (without statistics)
HI / IN / LO comparator function
USB, BPIB and RS-232 Interfaces provide easy system communication
Calibration without opening the case
10 sets of multimeter setup can be stored and loaded

Features:

Power Requirements Voltage 110V/220V AC +/- 15%
Frequency 50Hz/60Hz +/- 5%
Power Consumption - 20VA max.
Dimensions 265 x 105 x 360mm (approx.)
Weight 2.86.35kg (approx.)

MODEL:7002/7272
Basic Accuracy 0.25%
Max. Test Current : 5A (120mV) for 7002
Max. Test Current : 10A (60mV) for 7272
Manual or Auto Range
Four Terminal Kelvin Measurement
6 Ranges with 1mV Best Resolution
Measurement of Resistive and Inductive Materials
Setting for HI, LO & PASS Readings
Memory of 3000 Measurements Data
Programmable HI-LO Alarm with memory of 20 Data
Large LCD with Backlight & HOLD Function

Features:

Low Power Consumption
Battery Operated with AC Adaptor
Low Battery (Voltage) Alarm
LED indication for Invalid Resistance Measurement
Cable Length Measurement in feet & meters
User Interface Software for PC Communication via
RS232C(to USB Bridge) cable
Built-inBatery Chaging Circuit & Calender Clock

Measurement of 1 phase and 3 phase Transformer VT / CT Turns Ratio
VT / PT Ratio 0.8 - 2000
Graphical and Literal Illustration of Measurements and connections with Large Back - Lighted Dot Matrix 240 x 128 LCD
Displays Turns Ratio, Deviation, Secondary Output, Excitation Voltage and Current, Phase Angle and Nameplate. Transformer VT / CT Values in one page for easy quality interpretation
Check for Live Test Points, Short Circuit, Open Circuit and Reverse Polarity before each measurement
Store 4096 Files of Transofrmer Nameplate Values VT / PT / CT 1 Phase / 3 Phase, Test Frequency, Primary and Secondary Voltages or Ratio, RCF) and Measuring Data.

Features:

Ten Test Frquencies (50- 400 Hz)
9 Types of 3 Phase Winding Connection pre - installed
Wireless Blue Tooth Communication with PC
Select Filter to Remove Field noise (Slow, Normal, Fast)
Record with Date and Time Stamp
Powerful Lithium Battery with built - in Charging Circuit
User Programmable RCF ( Reference Correction Factor, 0.99 - 1.01) to Correct Accuracy within 1% Error
Friendly File System for Easy On - Site Data Retrieval and Nameplate Values Management

Basic measurement accuracy 0.1% & speed upto 10 meas / sec
Large LCD display with bright white backlight
Ultra low power consumption, battery powered for 2 hours of continuous use
Automatic identification function (Ai).
Percentage display & 4 tolerance comparator : 1%, 5%, 10% & 20%

Features:

9V battery & External power supply
Automatic correction function with datahold, max. / min. / average recording
Utility function configuration & current setup recovery after power off
Standard Mini-USB interface, SCPI compatible
Auto power Off
Constant output impedance : 100 ohm

Clear Transparent Acrylic Rectangular Type Moving Coil Meter Movement Type Moving Coil with Central Magnetic Core, Spring Mounted Jewel Bearing Suspension with Rectifier Circuit for AC

MECO Educational Desk Stand Meters are ideal for laboratory use. These meters are made of an unbreakable ABS desk stand with two or three
terminals and fitted with MR65, MR100, CR65 or CR100 meters.Clear Transparent Acrylic Rectangular Type Moving Coil Meter
Standards IS-1248, IEC-51, IEC-1010, BS-89, DIN 43700-43718
Movement Type Moving Coil with Central Magnetic Core, Spring Mounted Jewel Bearing Suspension with Rectifier Circuit for AC

Features:

DC Ranges
Current (A) : 0 - 100A to 0 - 1000A
Current (mA) : 0 - 1mA to 0 - 1000mA
Current (A ) : 0 - 1A to 0 - 30A
Voltage (mV) : 0 - 50mV to 0 - 100mV
Voltage (V) : 0 - 1V to 0 - 1000V
Galvanometer : 30 - 0 - 30G or 50 - 0 - 50G with 2A / Div or 20A / Div
AC Range
Current (mA) : 0 - 1mA to 0 - 1000mA
Current (A) : 0 - 1A to 0 - 5A
Voltage (V) : 0 - 10V to 0 - 750V

Models: FDM3AS / FDM72 x 1444SA, FDM5S / FDM72 x 1444SB, RPM3AS, RPM963AS, FDM963AS, FDM965S, FDM1444SA, FDM1444SB
Digits / Counts (max.) 4 Digits /9999 Counts; 5 Digits /99999 Counts

Features:

Input Ranges (AC) Hz : 20 99.99 Hz
20 - 999.9 Hz
20 - 99.999 Hz
20 - 999.99 Hz
20 - 5000.0 Hz
40 - 99.99 Hz
V : 20V - 500V

Models: DPF11, DPF31, DPF9611S, DPF9631S, DPF72x14411, DPF72x14431, DPF14411, DPF14431
Digits / Counts (max.) 4 digit / 1999 Counts
System 1/3 Phase, 1/2 Element, 2/3/4 Wire

Features:

Input Ranges (AC) V : 63.5/ 110/ 230/ 440V AC and Through PT for Higher Voltages
AC A : 1, 2, 5A AC and Through CT/ 1A or 5A for Higher Currents
Hz : 50Hz (V Range 20% of Nominal; A Range = 20 - 120% of Nominal)

Digit / Count (max.):4 digits / 19999 Counts (V)& 9999 Counts (Hz)

Features:

Input Ranges DC
Zero Suppressed : 4 - 20 mA or 1 - 5 V
AC
V : 0 - 20, 200, 750 V
I : 0 - 2, 5, 20 A

Frequency Range 10 MHz to 8.0 GHz
Triaxial Isotropic Measurement of EMF
Non-Directional (Isotropic) Measurement with Three - Channel Measurement Sensor
High Dynamic Range
Configurable Alarm Threshold and Memory Function
Easy & Safety to Use
Application:-
High Frequency (RF) Electromagnetic Wave Field Strength Measurement
Mobile Phone Base Station Antenna Radiation Power Density Measurement
Wireless Communication Application (CW, TDMA, GSM, DECT)
Wireless LAN (Wi-Fi) Detection, Installation
RF Power Measurement for Transmitters
Spy Camera, Wireless Bug Finder
Cellular / Cordless Phone Radiation Safety Level
Microwave Oven Leakage Detection
Personal Living Environment EMF Safety

Features:

Sensor Type : Electric Field (E)
Frequency Range : 10MHz to 8GHz
Isotropy Deviation : +/-10.dB (50MHz to 1.9 GHz)
+/-2.4dB (1.9GHz to 1.3 GHz)
Temperature Response : +/-0.5dB

Measures V, A, PF, Hz, KW, KVA, KVAr, Kwh, KVAh & KVArh
TRMS Measurement
Can be used for Continuous Monitoring
Auto / Manual Scroll Display (User Selectable)
State of Art Microcontroller Design
Portable, Handy, Plug-n-Play and Easy-to-use
LCD Display with Backlight
RS-485 5KV Isolated Port (Optional) with MODBUS RTU Protocol (Optional)
POWER MASTER Software for MIS Reports (Optional)

Features:

Applications
Appliances Testing (AC, Refrigerator, Washing Machine, Air Cooler, Microwave Oven etc.)
LED Light Testing
Can be given to field technicians in their tool kit
At the point of sale to demonstrate energy efficiency of your product over competition
Can be used by R & D Dept in Designing Energy Efficient Products
Study of Energy Efficiency of Electrical Equipment
Product Quality Testing
Energy Audit and Plant Maintenance
Building Management Systems
Power Management

This instrument is designed to measure Solar Power in the range from 400 to 1100 nanometers. The good Spectral Range, Orientation and Angular detection of meter allow users to conduct the most precise quantitative measurements of Solar Power Radiation
Solar Power Measurement with Orientation and Tilt Angle
Easy measurement for rate of daylight penetration
Auto change for measuring range
Auto power off with disable function
Instantaneous display Ave/Min/Max values
20 points memory
Socket of tripod mounting
Magnetic mount
Backlit LCD and 4 digits triple display
Applications:-
Solar Power Plant
Solar radiation measurements
Solar power research for location of the solar panels or solar water heater
Physics and optical laboratories
Meteorology
Agriculture
Windows performance - calculate the rate of daylight penetration

Features:

Sensor :Hight sensitive silicon photodiode
Spectral Response: 400 1100 nm
Range 0 2000 W/m2
Resolution 0.0099.99 W/m2: 0.001 W/m2; 100.0999.9W/m2: 0.01 W/m2; 10002000W/m2: 1 W/m2

The Extech PH220-C pH Meter is a Palm pH with Cabled Electrode. Microprocessor provides for Automatic Buffer recognition. Memory stores 25 readings. Large LCD displays pH or mV and temperature simultaneously. Includes cabled pH electrode, protective holster, pH buffers and 9V battery.

Features:

Large LCD displays pH or mV and Temperature simultaneously
Microprocessor provides for Automatic Buffer recognition
Memory stores 25 readings
Automatic Temperature Compensation
Unit is completely waterproof when electrode is connected to the meter
Low Battery indicator and Auto Power off
Includes cabled pH electrode, protective holster, pH buffers and 9V battery

480826 Triple Axis EMF Tester is designed to provide a quick, reliable and easy way to measure electromagnetic field radiation levels around power lines, electrical appliances and industrial devices. Provides Three axis (X, Y, Z direction) electromagnetic field measurement. Calibrated to measure EMF radiation at wide bandwidths from 30 Hz to 300 Hz. Complete with sensor with 3 ft. (930 mm) cable, 9V battery, and hard carrying case.

Features:

Three axis (X, Y, Z direction) electromagnetic field measurement
Ideal for EMF measurements around power lines, electrical appliances and industrial devices
Wide measuring ranges (3 ranges of Tesla or mGauss)
Big digit LCD display, Data hold
Easy to use remote probe
Complete with sensor with 3ft (930mm) cable, 9V battery, and hard carrying case

The LT45 LED light meter is useful for measuring and optimizing environmental light levels in a wide range of environments, including office buildings, manufacturing plants and warehouses, university campuses, schools, hospitals, and many other locations. OSHA regulates workplace lighting because illumination must be adequate for assigned tasks, and light meters are used to verify regulatory compliance, as well as state and local public safety codes and ordinances. Use of LED lighting is on the rise because it is more efficient to operate, it emits stable, high quality illumination, and the technology is dropping in price. The LT45 comes with a 9-volt battery, protective sensor cover, hard case, and user manual.

Features:

Measure White, Red, Yellow, Green, Blue, and Purple LED and Standard Lighting in Lux or Foot-Candle (Fc) units
Manually store/recall up to 99 readings
4000 count LCD display
Cosine and color corrected measurements
Min/Max Average and Auto Power Off
Complete with light sensor with protective cover and coiled cable expandable to 59" (1.5m), 9V battery, and hard carrying case

The PH210 is a pH/ORP/Temperature Meter that displays pH or mV and Temperature simultaneously. It uses a pH or ORP electrode with standard BNC connector and has ATC to improve accuracy when used with optional Temperature Probe. Electrodes are sold separately. Complete with 9V battery and soft case.

Features:

Displays pH or mV (ORP) and Temperature simultaneously
BNC input accepts standard pH or ORP electrodes (sold separately)
Manual or Automatic Temperature Compensation (via optional Temperature Probe)
Automatic 3-point calibration (4, 7, and 10pH)
Data Hold and Min/Max
Auto Power Off with disable feature
Complete with 9V battery and soft case (pH, ORP and Temperature Probes sold separately)

The VFM200 measures VOC (Volatile Organic Compound) and Formaldehyde concentrations in real-time. Fast response time, compact, easy-to-carry, and excellent for checking the indoor air quality of homes, offices, factories, hotels, schools and other indoor environments. Potential sources for VOCs include paints, finishes, adhesives, cigarette smoke, pesticides, personal care products, car exhaust, new furnishings, wall coverings, household cleansers, and cooking fuels. Chemicals include: Acetone, Ethylene Glycol, Formaldehyde, Xylene, 1, 3-butadiene, Tetrachloroethene, Hydrogen Sulfide, Ammonia, Toluene, Benzene, Methylene Chloride, Perchloroethylene, and MTBE.

Features:

Backlit LCD displays TVOC (Total Volatile Organic Compound) and HCHO (Formaldehyde) concentrations simultaneously in real-time
Built-in fast response, high accuracy fuel cell Formaldehyde sensor
Two selectable units of measure (ppm, mg/m3)
Adjustable audible and visible high/low alarms
Auto Power Off
Complete with rechargeable battery and Universal AC Adaptor/Charger (multi-plugs US, EU, UK, and AU)