Our Products
Steam Cleaners
2 Products availablePipe Nozzles
2 Products availableNuts Bolts And Fasteners
2 Products availableIndustrial Valves
2 Products availableWe offer the best product range of Poylurethene Suction Hoses, petroleum hoses, UPE/XLPE Chemical Hose, Pu Duct Hose and Industrial Hose.
Application:
Suction and delivery hose to convey mineral oils and fuels with an aromatic content up to max. 50%.
Construction:
Tube:NBR rubber, black, smooth, antistatic (R
Universal suction and delivery hose suitable for transferring a wide spectrum of aggressive chemicals. Normally installed on tank trucks and discharge platforms or recommended for in-plant applications in laboratories and chemical industries.
CONSTRUCTION
TUBE: UPE (ultra High Molecular Weight Polyethylene), neutral, smooth. Resistance: according to the MTG Chemical Resistance Chart.
REINFORCEMENT: lies of high strength synthetic cord. Embedded steel helix wires. Built-in copper wires.
COVER: EPDM rubber, black, smooth, antistatic (R < 106 ), resistant to abrasion, weather and ageing, cloth finish.
TEMPERATURE RANGE:From 35C up to +100C.Resistant to steam up to +130C for a maximum time of 30 minutes.
SAFETY FACTOR: 3 times working pressure.
It has excellent flexibility as using natural materials and can inhale hot exhaust gas.
Flection radius is small so it is easy to rewind and use.
It is divided into 2 kinds, depending on the temperature and situation in use.
Use: Auto factory, Service Center, Laboratory, School labs
Features: Frame by each 5M, Electrical type, Manual Type
Installation: Ceiling (Within 5M height, If installed over 4M, it could not rewind.)
Model |
| Hose | Weight (kg) | Remark |
I.D (mm) | Maximum Temperature L (M) | |||
CR-MP75 | 75 | 180 1m | - | Circular Type |
CR-MP100 | too | 180 1m | - | Circular Type |
CR-MP125 | 125 | 180 1m | - | Circular Type |
CR-HP75 | 75 | 180 1m | - | Oval Type |
CR-HP100 | 100 | 180 1m | - | Oval Type |
CR-HP125 | 125 | 180 1m | - | Oval Type
|
Portable and Light
Cold resistance and impact resistance.
Easy use for air tools, lubricating device, pneumatic tools and tracker works.
Size | E.D (mm) | I.D (mm) | L (M) | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | W.P (kg/ccf at 20C) | Color |
8x5x5 | 8 | 5 | 5 | 1, 000 | 150 | 430 | 150 | 34 | 8 | Yellow |
8x5x7.5 | 8 | 5 | 7.5 | 1, 230 | 150 | 630 | 150 | 34 | 8 | Yellow, Blue |
8x5x10 | 8 | 5 | 10 | 1, 400 | 150 | 800 | 150 | 34 | 8 | Yellow |
10x6.5x5 | 10 | 6.5 | 5 | 1, 000 | 150 | 400 | 150 | 42 | 8 |
|
10x6.5x7.5 | 10 | 6.5 | 7.5 | 1, 235 | 150 | 635 | 150 | 42 | 8 |
|
We are a leading distributor of premium quality polyurethane hoses. These are in compliance with the international quality standards. They are available in different models and sizes as per the requirement and specifications of the customers. Our VEC PU ducts are highly flexible and have good resistance to chemicals, mineral oils etc. These are available at market's leading price. Universal and abrasion-proof suction and transport hose, especially suitable:
For abrasive solids such as dust, powder, fibers, chips and granulates
For gaseous and liquid media
For de-dusting and suction plants, industrial vacuum cleaners, suction of paper and textile fibers
Properties
Super-light model
Highly flexible and compressible 4:1
Abrasion proof
High tensile strength and tear resistant
Good resistance to mineral oils, chemicals, UV and ozone
Very good low temperature flexibility (better than comparable ester-polyurethanes)
Small bending radius
Kink-proof
Free of softener and halogen
Gas and liquid tight
Capable of electro-static discharge ( to 149mm according to BGR 132, formerly ZH 1/200) by grounding the spiral
Material
Wall: special premium ether-polyurethane
Spiral: spring steel wire
Temperature Range
40C approx. to +90C approx.
Short time to +125 C approx.
High Flexibility.
Suitable For Car Service Centres and Construction Sites where using tracker and impact.
Able to use -20 C - 60 C.
Size | E.D (mm) | I.D (mm) | W.P (kg/ccf at 23C) | Color |
10 x 6.5 | 10 | 6.5 | 15 | Orange |
12 x 8 | 12 | 8 |
|
|
Hose composed by reinforced Nylon fabric, PVC-coated on both sides and embedded wire hellix.
Features :
Color : Grey
Standard Length : 10 m
Operating Temperature : -20C to + 80C (peaks of +110C)
Bending Radius : R 0.5 X
Axial Compressibility : 8:1
Applications:Fumes, gas, steam intake, ventilation and aeration. Ship and domestic conditioning.
We are a prominent supplier of neoprene hoses. These are available in different models and sizes as per the requirement of customers. They are double layered, leak proof and have smooth interior. Our entire range of VEC neoprene flexible hoses is available at competitive prices. We take bulk orders and supply products with in the committed time span. Suction and blast hose, especially suitable for:
As conductor of hot and cold air
For granulate dryers in the plastic industry
For printing machines, blowers and compressors
For exhaust gas techniques, engine construction and military construction.
PropertiesDouble layerVery good heat resistanceLeak-proofSmooth interiorFlexibleFiber reinforcedSmall binding radiusKink-proofConform to ROHS guideline. | MaterialSpiral : spring steel wireWall : Neopren colated glass fabric Temperature Range: -50C approx. to +150C approx. |
Our company is engaged in distributing high quality VEC silicon flexible hoses. These are available in different sizes as per the specifications of the clients. The quality of these VEC silicon flexible hoses adheres to the international quality standards. We take orders from the bulk buyers and deliver these with in the given time span.
Application:Suction and blast hoses, especially suitable:As conductor of hot and cold airFor granulates dryers in the plastic industriesFor printing machines, blowers and compressorsFor exhaust has technique, engine construction, engine warming, aircraftConstruction and military construction
PropertiesDouble LayerVery Good Heat ResistanceLeak ProofSmooth InteriorFlexibleFibre ReinforcedSmall Bending RadiusKink ProofConform to RoHS guidelines | MaterialSpiral:spring steel wireWall:Silicon coated glass fabrics Temperature Range-70C approx to +260C approxshort time to +280C approx |
We are a distinguished distributor of P.U. vacuum hoses. These are available have smooth interiors and are abrasion proof. They are available in different sizes and lengths as per the requirement of the clients. Our entire range of vacuum hoses is available at reasonable prices and are delivered with in the stipulated time.
Application:
Universal and abrasion-proof suction and transport hose, especially suitable:
For abrasive solids such as dust, powder, fibers, chips and granulates
For gaseous and liquid media
For de-dusting and suction plants, industrial vacuum cleaners, suction of paper and textile fibers as resistant protection nose
As resistant protection hoses
Properties
Medium-heavy model
Highly abrasion proof
Smooth Interior
Optimized flow properties
Flexible
High Tensile strength and tear resistant
Food quality wall complies with FDA 21 CFR 117.2600 and 178.2010, EC guideline 2002/72/EC incl. the latest amendment 2007/19/EC, German guideline XXXIX BIR polyurethane
Approval according to EC guideline 2002/72/EC incl. the latest amendment 2007/19/EC for the complete hoses by independent institute
Microbe and hydrolysis resistant
Good resistance to mineral oils, chemicals, UV and ozone
Very Good low temperature flexibility
Small Bending radius
Kink proof
Free Of softener and halogen
Gas and liquid tight
Flame retardant according to: UL94-HB
Conform to RoHS guideline
Capable of electro static discharge
Material
Wall : Special premium etherpolyurthane
Spiral : Spring steel wire
Temperature Range
-40C approx.to+90C approx.
Short time to +C approx.
It is made by Aluminum-coated glass fabric, isolated and very flexible air conditioning hose with re-positioning properties. Especially suited for hidden installations.
Features :
Flexible
Space-saving
Highly Compressible
Color : Silver
Temperature Range : -30C to +120C
Length : 4m
Applications :
Central Air-conditioner
Vehicle Construction
Rolling stock Construction
Train Airflow
Printing Machines
UV Curing Machines
Plastic Industries
Packaging Industries
Used extensively for suction, delivery purposes, our EPDM food grade hoses are also suitable for milk and by- products. Manufactured from high quality raw materials, our hoses are available at cost effective prices. These are user-friendly in design and deliver long lasting performance.
ApplicationHigh quality beverage hose particularly suitable to handle a wide spectrum of liquid food products such as wines, Fruit juices, beer, potable water.Ideal solution when temperature capacity is requiredInner liner resistant to medium concentration acids and basesFor section and delivery purpose
Construction Tube :
EPDM-based rubber, light colour, odourless and tasteless, mirror-like, smooth
Rubber compound complying with FDA standard, with BgVV recommendations and requirements of the German food legislation ( Cat.II) and with M.D. 21/03/73 and following amendments.
Suitable for all commercial cleaning and disinfection products used m the food industry.
Reinforcement:Plies of synthetic cord and embedded steel helix wire.
Cover :Synthetic rubber, green, smooth, abrasion and weather resistant, cloth finish.
Temperature Range:From -40 up to 120CSterilisation up to 140C for a maximum time of 30 minutes
Our P.U. Food Grade hoses are widely used as resistant protection nose. These abrasion-proof hoses are offered in medium and heavy model. With smooth interior and flexibility, these have optimized flow properties. In addition to this, these are high tensile strength and tear resistant.
ApplicationUniversal and abrasion-proof suction and transport hose, especially suitable:
For abrasive solids such as dust, powder, fibres, chips and granulates
For gaseous and liquid media
For de-dusting and suction plants, industrial vacuum cleaners, suction of paper and textile fibres
As resistance protection hoses.
PropertiesMedium heavy modelHighly abrasion proofSmooth InteriorOptimized Flow PropertiesFlexibleHigh Tensile Strength and Tear ResistantFood quality wall complies with: FDA 21 CFR 177.2600 and I 178.2010. EC guideline 2002/72/EC incl. the latest amendment 2007/19/EC, German guideline XXXIX BfR polyurethaneApproval according to EC guideline 2002/72/EC incl. The latest amendment 2007/19/EC for the complete hose by independent instituteMicrobe and hydrolysis resistantGood resistance to mineral oilsGood resistance to chemicalsGood resistance to UV and ozoneVery good low temperature flexibility (better than comparable ester-polyurethanes)Small bending radiusKink-proofFree of softener and halogenGas and liquid tightFlame-retardant according to : UL94-HBConform to RoHS guidelineCapable of electro-static discharge [according to BGR 132. formerly ZH 1/200) by grounding the spiral
MaterialWall. special premium ether-polyurethaneSpiral : spring steel wire
Temperature Range-40C approx. to +90 C approx.Short time +125C approx.
Our TEFLON hoses which are specifically engineered to withstand dynamic stress during transfer of high purity fluids. These are superior in quality thereby these are durable, simple and demand less maintenance. These are suitable for use on filling machines and thus deliver peak performance.
Application
Universal sanitary hose designed to handle alimentary, cosmetic and pharma-chemical products.
Specially engineered to withstand dynamic stress during transfer of high purity fluids.
Particularly suitable for use on filling machines.
Fluorinated, ultra smooth, inert liner of the newest generation ensuring utmost degree of impermeability and absolutely hygienic and contamination-free delivery of the medium.
Construction Tube:PFA (Alkoxy Polymer), fully fluorinated, clear colour, smooth, mirror-like.No pick-up of taste and odour.Excellent flex-performance (resistance to repeated cycles of bending in accordance with ASTM D 2176).Chemical resistance ace. to MTG Chemical Chart.For foodstuff contact: complying with US Pharmacopeia (USP 23 Class VI) and USA Federal Drug and Cosmetic Act Title 21 P. 177.1550 (FDA).
Reinforcement :High strength plies of synthetic cord, embedded steel wire helix and built-in copper wires to ensure the dissipation of static electricity.
Cover:EPDM rubber, blue, smooth, resistant to abrasion, ozone and weather, cloth finish.
Temperature RangeFrom -40C up to +130C (depending on product and combinations).Sterilisation up to +150C for a maximum time of 30 minutes.In case of dynamic applications: from +10C up to +40C.
Our range of flexible silicon hoses which are long lasting in service and are also offered at cost effective prices. These are specifically designed so as to suit applications demanding reduced bending radia and are highly resistant under vacuum conditions.
Application
Silicone suction and delivery hose designed for handling high purity products, food products and alcoholic beverage concentrated to 96%.
Normally used in food, pharmaceutical and cosmetic processes.
Considering the critical level of application in sterile environments, the MTG Clearway hose is produced with utmost care
Starting from the accurate selection of high-purity ingredients to the specific production and stock procedures and the final curing of the product after vulcanisation to remove any residue.
Specifically designed to suit applications demanding reduced bending radia.
Efficient and highly resistant under vacuum conditions.
Autoclavable
Construction Tube:Silicone rubber, translucent, food and pharmaceutical grade, odourless and tasteless with mirror-like finish, smooth.
Reinforcement :High resistance polyester plies.Built-in spiral from stainless steel AISI 304.
Cover:Silicone rubber, translucent, food and pharmaceutical grade, odourless and tasteless. Smooth with glossy finish.Non-particle generating version compared to cloth finish. It can easily be cleaned with any detergents.
Temperature RangeFrom-60C upto + 180C.Sterilisation at +135C with steam, at +180C with hot air for a maximum time of 30 minutes.
NormsSilicone complying with F.DA and European Pharmacopeia (IV Ed., P.3.13).Non-cytotoxic according to ISO 10993 Part 5, USP XXVI Ed.2003.
We are a offering a wide range of textile hoses for textile industries which are well tested before packing and final delivery. Our wide range includes spiral hoses, suction hoses, flat hoses, compressor hoses, VEC P.U. spiral duct hoses, VEC PVC spiral duct hoses, VEC PU. suction hoses, VEC special flat hoses and VEC textile compressor cleaning hoses.
Our company is well known name engaged in offering a qualitative range of spiral hoses which have less aging property and are highly flexible. These are superior in quality and performance.
Advantage
Seven times durable than PVC hoses
Can with stand temp, up to 120 Deg C
Dimensional stability in the bending areas due to the steel reinforcement
Very short bending radius
4:1 compression ratio (suitable for bale plucker)
Application
C1/2, C 1/3, LC 300, LC 300 A, DK740, Dk780, Cross Roll & Other carding machines
RSB, DO/2S, DO/6, VOUK & Other draw frames
E7/4, Lk250, E60, Cherry Hara & Other Combers
Bale plucker & Blendo Met
Dimension Availability in mm (lnnerDia): 40, 50, 60, 61, 63, 75, 80, 90, 100, 115, 125, 140, 150, 160, 175, 180, 200, 250, 300, 350
Apart from the above dimensions any non standard sizes
Can be manufactured as per customer requirement sublet to Minimum Order Quantity
Our company offers a vast range of suction hoses which are at par with the industry approved quality standards. Offered at cost effective prices, our hoses are safely packed and these are taken care off during their transit.
Application
Suitable for compact spinning like Rieter, Suessen
Open end spinning, Rieter & LR Carding Machines
Advantages
Seven times durable than PVC hoses
Can withstand temp upto 120deg
Dimensional stability in the bending area
Less aging property
Very short bending radius
Highly flexible
Very smooth interior
Dimension Availability: 20, 25, 30, 32, 35, 38, 50, 60, 61, 75, 80
Apart from the above dimension any non standard sizes can be manufactured as per customer requirements subject to minimum order quantity.
We are a prominent name engaged in supplying a qualitative range of VEC SS annular corrugated hoses. These are supreme quality product delivering outstanding performance. Offered at economical prices, our hoses are offered with following services:
Durable
Resistant to rugged environment
Simple in use
Maintenance free
Corrosion resistant
Used in areas liable to contain explosive mixtures (explosion protection), we are offering VEC P.E. antistatic hoses and electrically conductive hoses. These have smooth interior, optimized flow properties and are also flexible in nature. Following are some of the essential applications, properties and other technical aspects of our products.
Application:Electrically conductive suction and transport hose, especially suitable :
For aggressive solids such as dust, powder, fibers, chips and granulates
For aggressive gaseous and liquid media
For vacuum cleaners, conveying systems, blowers and compressors.
PropertiesElectrical and surface resistance
These fully conductive PFA chemical hoses are specifically designed to handle cosmetic, pharmaceutical and highly flammable chemical products in areas where maximum safety is required. Highly durable and reliable, these are acknowledged for low-friction rate and abrasion & chemical resistance.
Application:
Universal hoes Full Ohm specifically designed to handle cosmetic pharmaceutical and highly flammable chemical products in working areas requiring maximum safety.
Engineered to ensure the dissipation of electrostatic currents not only superficially, but also through the hose wall (Resistivity : 4 times working pressure.
Tolleranze Dimensional:Diameter : ISO 1307- Length : ISO 1307 Wall Thickness : DIN 7715 T4 S2
TPE hoses are vibration resistant, crust-proof, highly flexible and compressible. Some of the essential applications areas, properties and others are:
ApplicationSpecial exhaust gas hose especially suitable:For suction of engine exhaust gasFor Hose ReelFor above and below floor suction extraction
PropertiesVibrant ResistantCrush ProofHighly Flexible and CompressibleFlow-optimizing exterior foldsFabric reinforcedGood resistance to chemicalsSmall bending radiusGas and liquid tightMinimum weightConform to RoHS guideline. | MaterialWall : EPDM/PP coated fabricSpiral : special hollow plastic helix Exhaust gas Temperature to +200C |
These non conductive UPE chemical hoses are used for versatile applications such as for suction and delivery of a variety of chemical, alcoholic and foodstuff products. These hoses are generally installed on tank trucks, discharge platforms, mobile equipment or recommended for implant applications in laboratories, food and chemical industries.
APPLICATION:
Versatile hose for suction and delivery of a variety of chemical, alcoholic and foodstuff products.
Normally installed on tank trucks, discharge platforms, mobile equipment or recommended for inplant applications in laboratories, food and chemical industries.
CONSTRUCTION TUBE:UPE (ultra High Molecular Weight Polyethylene), clear colour, smooth, mirror-like.Liner approved by BgVV and complying with FDA standards as well as M.D. 21.03.73 and following amendments.Resistance: according to the MTG Chemical Resistance Chart.
REINFORCEMENT:Plies of high strength synthetic cord.Embedded steel helix wire.Built-in copper wires.
COVER:EPDM rubber, black, smooth, antistatic (R < 106 .), resistant to abrasion, weather and ozone, cloth finish.
MARKING:Longitudinal blue-white stripe MTG POLYSPIR UPE FDA - BgVV.
TEMPERATURE RANGE:From 35C up to +100C.Resistant to steam up to +130C for a maximum time of 30 minutes.
SAFETY FACTOR> 4 times working pressure.
Features:Ether based polyurethane hose reinforced with stainless steel helix. Completely smooth inside and outside to ensure optimization of flow properties and for a easy and effective cleaning before and after using. Food grade in accordance with European 2002/72/CEE (classes A, B, C, D no milky products) and FDA title 21 CFR 177.2600 regulations. Odorless, it doesn't change the organoleptical properties of the delivered materials. Very good hydrolysis and microbes resistance. Flexible and not heavy though its wall thickness. Good resistance to mineral oils and chemicals, excellent resistance to ozone, weather and aging. Halogen free and conform to RoHS regulations, it can be made electrically bonded according TRB S 2153 by grounding the spiral.
Colour:translucent with stainless steel spiral.
TemperatureRange:- 40c+90c, (+125c short time).
Applications: suction and transport hose for the pharmaceutical and the food industry pulvers( pills and other granules, pharmaceutical solutions, food flours, drinks, wine, vinegar and spirits with max 15% alcohol content). Delivery of high abrasion materials, where a microbes resistance is required.
Connection systems:SAFEFLEX, look at the section connection systems
Features:Flexible hose made by thermoplastic rubber and reinforced by stainless steel spiral. Inside and outside completely smooth to enhance flow properties and to allow easy cleaning and sterilization processes. Developed to be used in the pharmaceutical industry according to USP CALSS VI. Odorless, it doesn't change the organoleptical properties of the delivered materials. Very good hydrolysis and microbes resistance. Flexible and not heavy though its wall thickness. Good resistance to mineral oils and chemicals, excellent resistance to ozone, weather and aging. Halogen free and conform to RoHS regulations. Instead of a conventional silicone hose, Pharma press do not need any vulcanization process, allowing to save energy sources and to limit CO2 emissions in the atmosphere. It can be sterilized in auto clave at 121 C.
Temperature range:-30C + 125C
Colour:Transparent
Application:Delivery of pharmaceutical liquids and substances. Delivery of food materials, even if fatty. For drinks like wine, vinegar, spirits its max 15% alcohol content.
Connection systems:Pharma press can be connected with SAFEFLEX and crimped stainless steel fittings.
Features:Flexible hose made by thermoplastic rubber and reinforced by high tenacity polyester yarn. Inside and outside completely smmoth to enhance flow properties and to allow easy leaning and sterilization processes. Developed to be used in the pharmaceutical industry according to USP CALSS VI. Odorless, it doesn't change the organoleptical properties of the delivered materials. Very good hydrolysis and microbes resistance. Flexible and not heavy though its wall thickness. Good resistance to mineral oils and chemicals, excellent resistance to ozone, weather and aging. Halogen free and conform to RoHS regulations. Instead of a conventional silicone hose, Pharma press do not need any vulcanization process, allowing to save energy sources and to limit CO2 emissions in the atmosphere. The hose can be sterilized in autoclave at 121 C.
Temperature range:-30C + 125C
Colour:transparent with white yarnApplication: delivery of liquids, substances and fluid in the pharmaceutical and cosmetics industries. Delivery of food materials, even if fatty. For drinks like wine, vinegar, spirits its max 50% alcohol content.
Connection systems:Pharma press can be connected with SAFEFLEX and crimped stainless steel fittings.
We have fully conductive UPE chemical hoses that are ideal to convey manifold chemical aggressive products. Engineered with precision, these hoses ensure the dissipation of electrostatic currents and appreciated for their reliability & durability.
APPLICATION
Universal hose to convey manifold chemical aggressive products.
For suction and discharge service.
Meets the standards EN 12115 and EN 500/14/IEC 60079-0.
Engineered to ensure the dissipation of electrostatic currents not only superficially, but also through the hose wall (Resistivity: 3 times working pressure above ID 75 mm