Our Products
Beams And Girders
2 Products availableIndustrial Jacks, Lifts & Winches
2 Products availableOverhead Cranes
2 Products availableCranes & Lifting Machines
2 Products availableTrolleys
1 Products availableWire Making Machines
1 Products availableWinches
1 Products availableOur product range contains a wide range of Electric Wire Rope Hoist, Monorail Hoists, Single Girder Hoist and Electric Chain Hoists
DESIGN | Hoists are designed for all classes of application as per IS-3938. Standard Design is for Class II. |
MODULAR CONSTRUCTION | Hoist is assembled from different independent units viz. Hoisting Gear Box, Hoisting Motor with brake, Rope Drum, Electric Control Panel and Travelling Trolley. All these units are separately accessible and promptly disassembled to simplify repairs, reduce maintenance cost and downtime. |
MAIN FRAME | M.S. Plates are fastened with number studs to withstand the load of the different independent units attached to it. |
WIRE ROPE | Hoisting rope comply with the Indian standards Is:2266. The factor of safety, on the nominal breaking strength of the rope is six. |
ROPE DRUM | Grooved Drum, Seamless Pipe of adequate length to be wounded in one/two layer and to provide proper support for the rope to minimise abrasive wear is provided. Drum Shaft revolves on self aligned roller Bearings for ensuring smooth running. |
ROPE GUIDE | Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. |
MOTOR | Motor are of Squirrel Cage, 40% CDF rating in class B insulation as per IS-325-1970, The unit is an IP 54 dust and damp proof enclosure, flange-mounted to the main frame of the Hoist. When creep speeds are required same is achieved by way of DC Clutch manufactered by NGEF/ Bharat BIJLEE/ GEC/ CROMTON/ own make. Hoist Motor is an HTSC parallel rotor machine. Specially rated for Hoist |
GEAR BOX | Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on bailor roller bearings, to ensure smooth, low-friction operation, the gear trains are greese lubricated. Also oil immersed Gear Box can be provided on request. |
BRAKE | Electromagnetic Fail-safe type brake mounted externally on the rear end of the Hoisting Motor ensuring easily accessibility. |
HOOK BLOCK | The Hook Block is tested to 150% of full load before assembly. The rope sheaves are fully guarded with protective steel castings. All sheaves rotate on Ball Bearings. |
TROLLEY | It consists of M.S. Plates forming side frame assembled with Runner-Wheels. Runner Wheels are mounted on Double sealed Ball Bearings. Trolley is adjustable for various I Beam sizes |
LIMIT SWITCHES | A Limite Switch is built in as one of many safety features preventing accidental over-hoisting and over lowering of the hook block. The trip positions are adjustable to allow correct setting for installation. |
ELECTRIC CONTROL PANEL | Controls are mechanically and electrically interlocked to prevent inadvertent operation of opposite motions and are all housed in an IP 54 dust and damp proof enclosure. A low voltage control system of 110 Volts. Minimises electrical hazards for the operator. |
GUARANTEE | A Guarantee is provided for the repair and replacement, which proves defective material or workmanship within one year of the sale on Ex. Works Basis. However electrical appliances are not covered in this guarantee. Every BHT Hoist is tested on 125% of its safe working load, before despatch and is issued with a Test Certificate. |
Technical Data for Electric Wire Rope Hoist
Model |
S.W.L. In Kg. |
Lift (Mtr.) |
Wire Rope (Dia) |
No. of Fall |
Hoisting Speed MTR/MIN |
Hoisting Motor |
C.T. Motor H.P. |
A | B | C | D | E | F |
M1/0.5/6 |
500 |
6 |
6 |
2 |
6 |
1 |
0.25 |
640 | 780 | 475 | 320 | 300 | 590 |
M1/1/3 |
1000 |
6 |
6 |
4 |
3 |
1 |
0.25 |
670 | 780 | 475 | 320 | 300 | 620 |
M2/1/6 |
1000 |
6 |
8 |
2 |
6 |
2 |
0.5 |
680 | 885 | 520 | 410 | 410 | 630 |
M2/1/9 |
1000 |
6 |
8 |
2 |
9 |
3 |
0.5 |
680 | 885 | 520 | 410 | 410 | 630 |
M2/1/12 |
1000 |
6 |
8 |
2 |
12 |
4 |
0.5 |
680 | 885 | 520 | 410 | 410 | 630 |
M2/1.5/4 |
1500 |
6 |
8 |
3 |
4 |
2 |
0.5 |
730 | 885 | 520 | 410 | 410 | 680 |
M2/1.5/6 |
1500 |
6 |
8 |
3 |
6 |
3 |
0.5 |
730 | 885 | 520 | 410 | 410 | 680 |
M2/1.5/8 |
1500 |
6 |
8 |
3 |
8 |
4 |
0.5 |
730 | 885 | 520 | 410 | 410 | 680 |
M2/2/3 |
2000 |
6 |
8 |
4 |
3 |
2 |
0.5 |
730 | 885 | 520 | 410 | 410 | 680 |
M2/2/4.5 |
2000 |
6 |
8 |
4 |
4.5 |
3 |
0.5 |
730 | 885 | 520 | 410 | 410 | 680 |
M3/2/4.5 |
2000 |
6 |
10 |
2 |
4.5 |
3 |
0.5 |
800 | 885 | 685 | 510 | 480 | 750 |
M3/2/6 |
2000 |
6 |
10 |
2 |
6 |
4 |
0.5 |
800 | 885 | 685 | 510 | 480 | 750 |
M3/2/7.5 |
2000 |
6 |
10 |
2 |
7.5 |
5 |
0.5 |
800 | 885 | 685 | 510 | 480 | 750 |
M3/2/11 |
2000 |
6 |
10 |
2 |
11 |
7.5 |
0.5 |
800 | 885 | 685 | 510 | 480 | 750 |
M3/3/3 |
3000 |
6 |
10 |
4 |
3 |
3 |
0.5 |
940 | 885 | 685 | 510 | 480 | 810 |
M3/3/4 |
3000 |
6 |
10 |
4 |
4 |
4 |
0.5 |
940 | 885 | 685 | 510 | 480 | 810 |
M3/3/5 |
3000 |
6 |
10 |
4 |
5 |
5 |
0.5 |
940 | 885 | 685 | 510 | 480 | 810 |
M3/3/7.5 |
3000 |
6 |
10 |
4 |
7.5 |
7.5 |
0.5 |
940 | 885 | 685 | 510 | 480 | 810 |
M3/4/3 |
4000 |
6 |
10 |
4 |
3 |
4 |
0.5 |
980 | 885 | 685 | 510 | 480 | 930 |
M3/4/4 |
4000 |
6 |
10 |
4 |
4 |
5 |
0.5 |
980 | 885 | 685 | 510 | 480 | 930 |
M3/4/5.5 |
4000 |
6 |
10 |
4 |
5.5 |
7.5 |
0.5 |
980 | 885 | 685 | 510 | 480 | 930 |
M4/5/3 |
5000 |
6 |
12 |
4 |
3 |
5 |
1 |
1080 | 955 | 835 | 550 | 550 | 1030 |
M4/5/4.5 |
5000 |
6 |
12 |
4 |
4.5 |
7.5 |
1 |
1080 | 955 | 835 | 550 | 550 | 1030 |
M4/5/6 |
5000 |
6 |
12 |
4 |
6 |
10 |
1 |
1080 | 955 | 835 | 550 | 550 | 1030 |
M4/5/7.5 |
5000 |
6 |
12 |
4 |
7.5 |
12.5 |
1 |
1080 | 955 | 835 | 550 | 550 | 1030 |
M4/7.5/3 |
7500 |
6 |
14 |
4 |
3 |
7.5 |
1 |
1135 | 1055 | 835 | 550 | 550 | 1085 |
M5/10/3 |
7500 |
6 |
14 |
4 |
4 |
10 |
1 |
1135 | 1055 | 835 | 550 | 550 | 1085 |
M5/10/4 |
7500 |
6 |
14 |
4 |
5 |
12.5 |
1 |
1135 | 1055 | 835 | 550 | 550 | 1085 |
M5/10/4.5 |
10000 |
6 |
16 |
4 |
3 |
10 |
1 |
1520 | 1205 | 1050 | 550 | 650 | 1470 |
M5/10/6 |
10000 |
6 |
16 |
4 |
4 |
12.5 |
1 |
1520 | 1205 | 1050 | 550 | 650 | 1470 |
M5/12.5/3 |
10000 |
6 |
16 |
4 |
5 |
15 |
1 |
1520 | 1205 | 1050 | 550 | 650 | 1470 |
M5/12.5/3.5 |
10000 |
6 |
16 |
4 |
6 |
20 |
1 |
1520 | 1205 | 1050 | 550 | 650 | 1470 |
M5/12.5/5 |
12500 |
6 |
18 |
4 |
3 |
12.5 |
1.5 |
1520 | 1270 | 1050 | 550 | 650 | 1470 |
M5/15/3 |
12500 |
6 |
18 |
4 |
4 |
15 |
1.5 |
1520 | 1270 | 1050 | 550 | 650 | 1470 |
M5/15/4 |
12500 |
6 |
18 |
4 |
5 |
20 |
1.5 |
1520 | 1270 | 1050 | 550 | 650 | 1470 |
M4/7.5/4 |
15000 |
6 |
20 |
4 |
3 |
15 |
1.5 |
1700 | 1340 | 1050 | 550 | 650 | 1650 |
M4/7.5/5 |
15000 |
6 |
20 |
4 |
4 |
20 |
1.5 |
1700 | 1340 | 1050 | 550 | 650 | 1650 |
A girder is a support beam which is used to denote the main horizontal support of a structure that supports smaller beams. Single girder cranes can be of I-beam type main girder which has a crane span of 18m(59 ft) and load up to 10 tonnes Box-type main girder which spans up to 30m (98 ft) and can uplift load up to 40 tonnes Single girder cranes cost less in many ways as only cross girders are needed; quicker installation; runway beams are lighter enough due to reduced crane dead weight.
Technical Specifications :
Capacity (in Kg) | 500 | 1000 | 2000 | 3000 |
No. of Fall | 1 | 1 | 2 | 2 |
Hoisting Speed Mt./Min. | 5 | 5 | 2.5 | 2.5 |
H.P of Motor | 0.75 | 1.5 | 1.5 | 1.5 |
Closed Ht. Hook to Hook | 750 | 775 | 780 | 780 |
Clear Width | 250 | 250 | 250 | 250 |
Clear Length | 550 | 570 | 575 | 575 |