Veksler Engineering

Delhi

It is an economical, maintenance free and a very reliable device used for high, low or intermediate point level switching. It is ideal for tanks with inaccessible tops or bottoms and where insertion depths of top mounted models are exceeded. The construction is compact & rugged with a free moving pivoted float assembly. The Switch assembly is mounted in a non-magnetic material to achieve undisturbed magnetic flux. It employs dual magnets, one linked with the float arm and other by the contract carriers housed in the switch enclosure. Change in the liquid level brings the like poles of dual magnets opposite to each other & resulting repulsion force ensures a changeover of contacts with snap action. The magnetic transmission is gland less so there is no scope of leakage from vessel into switch housing. These switches are manufactured in various materials and enclosures to suit broad range of media/applications. They are designed to provide high repeatability and to minimize effects of shock, vibration & pressure.

• Most economical, maintenance free and a very reliable device for point level switching
• Dual permanent Alnico magnets
• +/-2 mm repeatability
• 40/50/65/80 or 100 NB Flange drilled to ASA 150#
• Cast Al, weatherproof to IP 56/IP65 or ex-proof Gr. IIA & B or II C Enclosure
• 3/4" ET / 1/2" NPT Electrical connection
• SS 304/SS 316/SS 316L/PP/PTEE Float & Wetted Parts
• 0.6 min Sp. Gr Depending upon float material and dimensions
• Micro switch rated at 5 Amp, 220 VAC, SPDT/DPDT/ Air break type also available
• Load /Insulation: Resistive, 150 Mega ohms at 1.5KV
• Internal and External mounting through a chamber/Cage
• 20 KG/cm² max pr at ambient temp. Special design available for higher pressures
• 150^oC max temp for standard model & upto 350^oC depending upon float material, switch elements and mounting

We provide the clients with Sight Flow Indicator that is used for viewing the fluid in pipelines. These Sight Flow Indicators are suitable for all kinds of non-transparent pipeline and ensure accurate results. Our range of Sight Flow Indicators is known for its qualitative features thus demanded by the clients spread across the globe. Moreover, the indicator is available with flange connection in sizes from 25 DN to 150 DN. Details :

• Consists of a glass tube, one metal frame of CS/SS 304/SS 316/PP/Teflon, a pair of PTFE bushes and packing rings
• Flange drilling can be done as per any standard table - ASA 150, BS or DIN.

Features :

• Heat resistant
• Chemical resistant
• Accurate measurement of fluid
• Longer working life
• No flow restrictions
• Complete visibility

Applications :

• Horizontal pipelines
• Vertical pipelines

VEKSLER offers its clients with top quality Metal Tube Rotameter that is manufactured in accordance with international standards. This Metal Tube Rotameter is used for opaque and turbid fluids at high operating temperature and pressures. Metal Tube Rotameters offered by us, are known for their rugged construction, high performance and durability among the clients. Features :

• ABS/Die Cast Aluminum indicator box with Aluminum pointer and SS 304 hardware
• High Pressure and Temperature service
• Linear flow reading and output signals
• Line size from 1/2" to 4"
• Over all flange to flange length 350 mm
• Flow 100 to 100000 LPH for water and 2000 m3/hr for air
• Flanged connections to any standard ASA, BST, DIN etc.
• Optional alarms and 4-20 mA output
• Accuracy : better than +2% full flow
• Range ability : 10:1
• Repeatability : 0.5%
• Scale : 90^o Angular

Materials Of Construction :

• Top flange : SS 304 / SS 316/ SS 316L/ HastalloyC
• Scale : Anodized Aluminum
• Pointer : Aluminum knife edge sharp
• Indicator Box : ABS/Die Cast Aluminum
• Pipe : As per wetted parts
• Bottom flange : SS 304 / SS 316/ SS 316L/ HastalloyC

Details Required For Sizing And Calculation :

• Service Fluid
• Sp. Gravity of Fluid at operating conditions
• Viscocity of Fluid
• Working Temp & Pressure
• Flow Range
• Wetted Parts MOC
• Line Size , Connection & Orientation

We are instrumental in manufacturing Tubular Level Gauge that is appreciated for its simple construction, long working life and reliable performance among the clients. The Tubular Level Gauge is specially designed to measure visual liquid level. Moreover, we ensure the quality of Tubular Level Gauge and make sure it is manufactured in compliance with international standards. Salient Features :

• Choice of Tie Rod or C-Frame Construction
• Available with or without isolating valve
• Material integrity assured through strict compliance of chemical composition analysis in a Standard Laboratory
• H Grade Borosilicate glass tube 16/19/25 mm outer dia with Teflon Packing
• Glass tube an be removed online i.e. without disconnection from vessel
• Standard Connection : 1/2" / 3/4" / 1" Flange drilled to ASA 150#, others on request
• Alluminium/SS scale with 5 mm resolution as standard and 1 mm on request
• Drain Plug 1/2" Vent Plug 3/4" as std and drain/vent valve as optional
• Safety Ball check device(optional)
• Defrost/illuminator available on request.
• Hydro test pressure : 12 KG/cm2, 100 Deg C max working temperature.
• Tie Rod Construction is light' and permits 360^oC visibility
• C-Frame construction is robust and permits observation from Front & Rear
• Both constructions are available in integral or inline arrangements
• High quality, H grade borosilicate glass tube in 16/19/25mm outer dia is used
• Available in single length having c/c distance = 1600 mm
• Gland packing design provides tension free tube installation to achieve zero leakage
• Transparent Acrylic Plate mounted on C-Frame/Acrylic Pipe or slotted metallic pipe clamped on Tie Rod as glass protector can be provided if required, for additional safety to glass & personnel
• Adjustable proximity/reed switch arrangement for level sensing with alarm relays

Reflex Level Gauge is designed for liquid level indication in vessels under high pressure & temperature conditions. These Reflex Level Gauges are widely demanded in various pharmaceuticals and other industries due to their high performance and longer service ability in the domestic as well as international market. Special Features :

• PP, CS, MS, SS 304, SS 316, SS 316L Chambers and isolation valves.
• Chamber machined from 40 mm square bar with 1/2" BSP drain & Vent plugs.
• Tempered borosilicate glass (Indigeneour/ Klingerite), resistant to chemicals, thermal & mechanical shocks.
• Working pressure 65 kg/cm2 max and 4500 C temperature
• Graded Alloy Steel U Bolts, Nuts and Studs as std and SS on demand.
• Flanged connection drilled to ASA 150# or as per customer's requirement.
• Choice of medium and high pressure designs in various body & gaskets materials to suit process media and temperature.
• Trouble free operation
• Large chamber construction available for boiling, foaming, flashing or surging liquids
• Weld Pad construction available for liquids containing suspended solids, or for situations, where piping is not acceptable or space is a limiting factor
• Isolating valves, safety ball check, scale, illuminator, frost free, heating/cooling arrangement are optional.
• Variety of accessories & special features like isolating valves, safety ball check, scale illuminator, frost free heating/ cooling arrangements.

These are used for liquid gas Steam service under normal conditions. The bourdon tube is 'C' shaped and closed at one end. When this is subjected to fluid pressure from the other end, the deflection is created and transmitted via movement to thte indicating pointer over dial. These are calibrated by comparison against master gauges and the accuracy is +-1% of span with test certificates traceable to national standard. Connection is threaded 14", 38", 12" BSPNPT. Range upto 1000 Kgcm2, -760 mm Hg to 0 (Vacuum).These are used for liquids or gaseous media, for viscous, corrosive, slurry service. The diaphragm is hel between two flanges and deflects under pressure. This deflectin is transmitted through a link and movement to indicating pointer on the dial. Diaphragm and Flange material is selected depending upon the type of fluid. These are also available with chemical sealing fluid like silicon.

Suitable for Gas liquid flows for a maximum temp of 95 Deg CCustomized scale for readout in any desired unitAttractive appearance for panel mountingWide choice of material to suit all applications14", 12" threaded rear and top connectionsTransparent acrylic glass coverOptional differential pressure regulator and alarms.0.6 to 160 LPH for water and 10 to 4500 NLPH at NTP for air Accuracy +-3% of for full scale

Orifice Plate are used extensively for Industrial Flow Measurement and can be used for clean liquids, Steam and gases application. The Orifice Plate are designed as per BS 1042IS Standards and the accuracy is 12 to 1% .These can be supplied withwithout matching flanges and Carrier ring.The Plate is machined from SS 304SS 316Monel. Flanges can also be of different material like ASTM A 105, A 182, SS 304, SS 316 and Monel. The Flange rating may be 150#300#600# or more as per customer's and process requirement.Specifications:

The VEKSLER Top Mounted Level Switches (TLS-19) is highly reliable and a low cost instrument. It can be used for small tanks as well as large vessels depending upon individual customer's requirement. It consists of a guide pipe made from SS 304/SS 316, a magnetic float of SS 316 that moves on the tube with rise and fall of level. Hermetically sealed reed switches are housed in the guide pipe. The switches can be fixed at any position through out the length of the pipe. But the position should be defined at the time of order as it cannot be changed at site. The factory set accuracy is +/-5mm. Since it works on magnetic principle, there is no mechanical connection and hence the chances of any wear/tear, fluid contamination are eliminated. The process connection is 3 NB Flange as per ASA 150# or any other standard as per individuals requirement. The Floats are hydro tested to work at 15 Kg/cm2. Floats for higher pressure can also be supplied. The working temperature is 90 Deg C. These are very useful for Diesel/Furnace Oil Day tanks and are supplied with IP65/EX-PROOF Gr 11A & 11B enclosures. The other applications include vending machines, small tanks, pumping stations, water tanks. Optional Relay units are available for higher current ratings. It can be wired with low load; however high resistive/inductive loads should be connected in series through control unit. This instruments is PC/PLC< DCS, Alarm Annunciator configurable.

• Very reliable yet a low cost instrument
• +/- 5mm accuracy
• Available in Single & Multiple Floats
• Hermetically sealed magnetic switches at pre fixed positions in the guide pipe
• Reed Switch Operation
• 2" / 3" MS Flanged connection as per ASA 150# or as per customer's requirement
• Can be wired directly with low load, use control (Relay) unit for high resistive/inductive loads
• Available in Ex-Proof Gr IIA & IIB/Weather proof connection box
• Max. Pressure Upto 20 Kg/cm² and 80 Deg C temperature
• Custom designed to your exact guide length and float dimensions
• Side mounted bracket available for easy installation in open tanks / sumps
• PC/PLC/DCS, Alarm Annunciator configurable
• Also Available in External Cage Type
• 3 Flanged Connection as per ASA 150# or Any Other Standard
• Flame Proof/Weather Proof Connection Box
• Guided Tube : SS 304/ SS 316

Our Glass Tube Rotameters are manufactured from high grade materials that ensure high durability. These Glass Tube Rotameters are appreciated for their superior performance and exact results in the global market. In order to attain utmost client satisfaction, we provide Glass Tube Rotameter in varied specifications to the customers. Features :

• Accuracy better than +/ -2% of full scale
• Overall length of 500 mm and 350 mm (for Low Range) in flanged versions
• End connections can be rotated through 360 Deg
• Connection orientation
• Top & Bottom, rear, bottom and rear, rear and top
• Tube can be changed without disconnecting the meter from the line
• Detachable scale with flow in customers engineering units
• Standard interchangeble floats for a given size
• Adjustable packing gland
• Wide choice of flow ranges for individual requirement
• Sturdy metallic construction to withstand pipeline stress and vibration
• 1/2" to 4" Line size and max flow upto 30000 LPH for online installation
• Optional high and low alarms
• Material of Construction
• Borosilicate Glass Tube
• SS 304/SS 316/Teflon Floats
• CC, MS, SS 304, SS 316, Rubber lined PTFE lined End Fittings, threaded or Flanged (ASA 150 #, BS 10 Table D/E or as per customer's requirement)
• Neoprene/ Teflon/ Silicon/ Viton Packing
• MS/ CS Powder coated Frame as standard and SS optional
• Aluminium frame with safety glass/ acrylic window
• CS/SS 304/SS 316 bolts
• Cast Steel epoxy painted gland housing

We bring forth precision engineered range of Magnetic Level Indicator, which is manufactured in accordance with set industrial standards. This Magnetic Level Indicator is flanged to the tank for indicating the level of liquids and liquefied gases in open or closed tanks. Further, this level indicator is safe to use and ensure longer working life. Details :

• The cage is flanged to the tank & the level is indicated on a strip which consists of magnetic bi-color rollers.
• The floats are available in various metallurgies like SS316, Titanium, PVDF, Polypropylene and PVC

Highlighting Features :

• Available in side and top mounting versions
• Capsule Indicator in glass tube or magnetic bi-color rollers
• SS 304, SS 316, PTFE, PP, PVC & PVDF Float & Cage Material
• Max. C.C. Distance : 5000 mm, greater lengths on request.
• Flanged connection drilled to ASA 150# or other on demand
• Pr 20 Kg/cm2 for SS & 3 Kg/cm2 for PP, PVC & PVDF, Higher Pr rating on demand
• Temp 450^oC for SS, 80^oC for PVDF, 60^oC for PVC, 50^oC (Max) for PP
• Specific Gravity : Min 0.5
• AI/SS etched scale in cm
• +/- 5 mm accuracy

Widely Used In :

• Chemicals
• Pharmaceutical industries
• Petrochemical industries
• Refineries
• Oil and fuel tanks

We are into manufacturing and exporting of Industrial Grade Manometer, which is specially designed to measure pressure. Industrial Grade Manometers offered by us, are manufactured from Aluminum casing from three sides with transparent acrylic front. Moreover, this Industrial Grade Manometer has uniform bore, thick -walled Borosilicate glass and is powder coated. Features :

• Scale is Aluminum Anodized with PVC/PP/SS304 wetted parts
• The end connections may be ¼" BSP, ½" BSP OR Nozzle type
• Mounting available in wall/Panel/Stand type.
• All manometers are supplied with zero adjusting knob and drain plug
• Instrument accuracy is better than +/-0.5% of F.S.D.

 

Specifications

U Tube Type	Scale Length	Resolution
1000 - 0 - 1000	2000 mm	1 mm
750 - 0 - 750	1500 mm	1 mm
600 - 0 - 600	1200 mm	1 mm
500 - 0 - 500	1000 mm	1 mm
400 - 0 - 400	800 mm	1 mm
250 - 0 - 250	500 mm	1 mm
200 - 0 - 200	400 mm	1 mm
150 - 0 - 150	300 mm	1 mm
100 - 0 - 100	200 mm	1 mm
Single Limb
0 - 200	200 mm	1 mm
0 - 300	300 mm	1 mm
0 - 500	500 mm	1 mm
0 - 760	760 mm	1 mm
0 - 1000	1000 mm	1 mm
0 - 1500	1500 mm	1 mm
0 - 2000	2000 mm	1 mm

We offer the clients with high performing range of Displacer Level Switch, which is integrated with latest features that ensure better results and functioning. These Displacer Level Switches are the most versatile for level control and control agitated liquids paints-varnishes & heavy oil and foaming liquids. Moreover, these Level Switch are flange mounted and are available with a choice of material of construction. Features :

• Based on Buoyancy Principle, displacer suspended by a spring
• Versatile for level control and have advantages over float type switches
• Best for agitated liquids like - paint & varnishes, heavy oil and foaming liquids
• Displacer Adjustable at any point
• SS 304/SS 316/PP/PTEF Displacer
• Explosion
• Proof/Weatherproof Connection Box
• Standard up to 15 meter length
• Single/Multiple Displacers, max up to 3 displacers
• Micro Switch Operated rated at 5 or 15 Amp 220 VAC
• Differential: 70 mm (maximum)
• Spacer Length : 325 mm

Material Of Construction :

Switch Enclosure Enclosing Tube Process Connection Spring Spring Guide

ROD Rope Displacer Displacer Stopper Cable Entry

Avail from us, superior quality Liquid Level Transmitter, which is used for continuous level indication and control for any liquid that is chemically compatible with its wetted parts. Our range of Liquid Level Transmitters is duly checked on different parameters at each level of production process in order to deliver a flawless range of Liquid Level Transmitter to the clients. Features :

• Top mounted type and is used for continuous level indication
• Resistance/ Reed switch Contact Chain, Max. 3 Mtr Length
• 4-20 mA O/P-2, 3 or 4 wire /0-10 VDC output or as required
• 3 " NB MS flange drilled to ASA 150# as standard and other connection on demand
• Accuracy : 1 cm, 90 Deg C max Temperature, 20 Bar max Pressure
• SS 304/316/PVC/PP/PTFE Guide Tube & Float
• Adjustable Multiple Alarm Contacts on Electronic Controller
• IP56/IP65/Ex-Proof Gr IIA & IIB approved enclosure
• Top Mounting with 80 NB Flanged Connection
• Customized Length up to 3 Mtrs

Applications :

• Tanks of Oils
• Fuels
• Chemicals
• Pure/Industrial water
• Ship/LPG tanks
• Critical Inventory
• Pharmaceutical plants

 

Specifications

 

Level Transducer
Measuring Range	3 meters max.
Accuracy	+/- 10 mm
Installation	Top Mounted
Terminal Enclosure	Cast Aluminium, weather proof to IP 56/65 and Ex. Proof For Gr. II A & II B/ Gr IIC
Conduit Connection	Brass, ¾" ET or ½" NPT
Wetted Parts	SS304, SS316 or PP
Float	SS 316, Magnetic
Process Connection	Flanged to BS/ ANSI/ ASA/DIN
Min Liquid Sp. Gr.	0.7
Max. Temperature	60oC (PP) / 90oC (SS)
Test pressure	3 kg/cm2 (PP)/ 10 Kg/cm2 (SS)
Transmitter (Integral With Transducer)
Wiring System	2 wire/ 3 wire
Input	variable resistance from transducer
Output	4 - 20 mA/0 - 10 VDC
Max. Load	400 ohms
Supply	24 VDC
Display Unit
Digital Display	3½"or 4½" digits
Power Supply	24 VDC/110 VAC/230 VAC
Enclosure	Panel/Wall mounted
Set Points (Optional)	One to four
O/P Relay Contacts	5 A, 230 VAC