Our Products
Engine & Engine Parts
2 Products availableMining Machinery
1 Products availableIndoor Plants
1 Products availableMetal Scrap
1 Products availableCrushing Machines
1 Products availableWe are leaders in the market for providing best range of Concrete Machinery, Hydraulic Pneumatic Tyre Roller, Crusher Series, Excavating Machinery and hoisting machinery
Technical parameters
Vehicle performance | |||||
Mixing Volume (m3) | 6 | 8 | 9 | 10 | 12 |
Mixing Drum Angle() | 11.5 | 13.5 | 12 | 11.5 | 10 |
Geometric Volume(m3) | 10 | 13.79 | 15.58 | 17.03 | 20.11 |
Fill Rate(%) | 57.8 | 58.01 | 57.8 | 58.7 | 57.8 |
Input Speed(m3/min) | 3 | 3 | 3 | 3 | 3 |
Output Speed(m3/min) | 2 | 2 | 2 | 2 | 2 |
Output remainder rate(%) | 0.7 | 0.7 | 0.7 | 0.7 | 0.7 |
Slump Angle Range(mm) | 40-230 | 40-230 | 40-230 | 40-230 | 40-230 |
Dongfeng Chassis Parameters (Customers can choose other brands) | |||||
Chassis Model | EQ3120GSZ3GJ | EQ3251GJB-DZ36 | DFL3250A1 | DFL3250A1 | DFL5251GJBA1 |
Engine Model | YC6J190-33 | YC6M320-20 | L340 20/C325 | L340 20 | Dongfeng Renault Brand dci375-30 |
Rated power(kW/rpm) | 190 | 236/2100 | 250/239 | 250 | 276 |
Maximum Torque(N.m) | 1350 | 1380/1400-1600 | 1350/1125 | 1350 | 1700/1300 |
Wheelbase(mm) | 4200+4500 | 3650+1350 | 3650+1350 | 3650+1350 | 4000+1350 |
Chassis kerb mass Approximately(kg) | 7605 | 8550 | 8680 | 8680 | 9400 |
PTO(Power Take Off) (kgf.m) | / | 45 | / | / | / |
Main imported hydraulic spare parts (oil pump, motor and reducer) configurations of concrete mixer are as follows (Optional)
5-6 m3 | pump | USA EATON) 4623-518 | (Germany Rexroth)A4VTG90 | motor | (USA EATON) 4633-138 | (Germany Rexroth)AA2FM80 | reducer | (USA Bonfiglioli)575L | Germany ZF P4300 | (Italy)PMP6sp |
8-10 m3 | pump | (USA EATON)5423-518 | (GermanySauer)T90/075 | (Germany Rexroth)A4VTG90 | (Italy)ARKPV089 | (Handler)SPV2/089 | motor | (USA EATON)5433-138 | (Germany Sauer)T90/075 | (Germany Rexroth)AA2FM80 | (Italy)ARKPV089 | (Handler)SMF2/089 | reducer | (USA Bonfiglioli)577L | Germany Sauer)TMG61.2 | (Germany ZF P5300 | (Italy)TOPP68 | (Italy)PMP6.5sp |
12-14 m3 | pump | (USA EATON)6423-518 | (Germany Sauer)T90/100 | (Germany Rexroth)A4VTG90/100 | (Italy)ARKPV089 | (Handler)SPV2/089 | motor | (USA EATON)6433-138 | (Germany Sauer)T90/100 | (Germany Rexroth)AA2FM90 | (Italy)ARKPV90 | (Handler)SMF2/089 | reducer | (USA Bonfiglioli)580L | (Germany Sauer)TMG71.2 | (Germany ZF P7300 | (Italy)TOPP75 | (Italy)PMP7.1sp |
Technical Perameters
Model | Z165F | Z170F | Z175F |
Type | Horizontal, four stroke | ||
Combustion System | Eddy current type | ||
Cylinder Num. | single Cylinder | ||
Bore* Stroke (mm*mm) | 65 x 60 | 70 x 75 | 75 x 75 |
Displacement (L) | 0.2 | 0.29 | 0.33 |
Compression Ratio | 23 1 | 20 1 | 21 1 |
1 hour rated Speed (kw/r/min) | 2.02/2600 (3 hp) | 3.23 / 2600 (4 hp) | 4.04/2600 (5hp) |
12 hour Rated Speed (kw/r/min) | 1.84/2600 | 2.94/2600 | 3.68/2600 |
Specific Fuel consumption (g/kw.h) | 326.9 | 304.2 | 287.0 |
Specific Oil consumption )g/kw.h) | 4.76 | 4.76 | 4.76 |
Cooling type | Air Cooled | ||
Lubrication | Splash Lubricating | ||
Starting Method | Hand Crank | ||
Net weight (kg) | 28 | 41 | 50 |
Technical Parameters
Model | Unit | LTP2030H | LTP1826H | LTP1016H |
Operating mass(Unballast/Ballast) | kg | 20000/30000 | 18000/26000 | 10000/16000 |
Max. travel speed | Km/h | 0-14 | 0-14 | 0-14 |
Tyre quantity(front+back) | 5+6 | 5+6 | 4+5 | |
Min. turning radius | mm | 8000 | 8000 | 7500 |
The presses width | mm | 2790 | 2790 | 2286 |
Gradeability | % | 30 | 30 | 30 |
Overall dimension | mm | 4950x2850x3100 | 4950x2850x3100 | 4780x2280x3200 |
Wheelbase | mm | 3800 | 3800 | 3700 |
Diesel power | Kw | 125 | 125 | 75 |
Diesel model | - | 6BTA5.9 | 6BTA5.9 | 4BT3.9 |
Technical Parameters
Model | R165 | R175 | R180 | R190 | ZS1100 | ZS1115 | ZS1125 | ZS1130 |
Type | Horizontal, Four Stroke, Single Cylinder, Water colled, Eddy current type | |||||||
Bore* Stroke (mm*mm) | 65 x 60 | 75 x 80 | 80 x 80 | 90 x 90 | 100 x 115 | 115 x 115 | 125 x 120 | 130 x 120 |
Displacement (L) | 0.199 | 0.353 | 0.402 | 0.572 | 0.093 | 1.194 | 1.47 | 1.59 |
Compression Ratio | 22 1 | 22:01 | 20:1 | 21:1 | 17 1 | 17 1 | 17 1 | 17 1 |
Rated Power (kw/hp) | 2.43/3hp | 4.41/6 | 5.15/7 | 7.35/10 | 12.10/16 | 16.17/22 | 20.22/28 | 22.24/30 |
Rated Rotating Speed (r/min) | 2600 | 2600 | 2600 | 2600 | 2200 | 2200 | 2200 | 2200 |
Specific oil consumption g/kw.h) | 307.4 | 280.2 | 278.8 | 247.7 | 246.2 | 2.44.8 | 2.44.8 | 2.44.8 |
Specific oil consumption g/kw.h) | 4.76 | 4.8 | 4.08 | 4.08 | 2.72 | 2.72 | 2.72 | 2.72 |
Lubrication | Force/splash lubricating | |||||||
Starting Method | Hand crank | Electric Start | ||||||
Net weight (kg) | 29 | 70 | 75 | 96 | 155 | 185 | 185 | 215 |
Technical Parameters
Item | TR 138D | TR150A | TR180D | TR200D | TR220D | TR250D | TR280D | TR360D | TR400C | TR500C |
Drilling torque max (KN.m) | 138 | 150 | 180 | 200 | 220 | 250 | 280 | 345 | 380 | 475 |
Drilling Depth max. (m) | 50 | 55 | 60 | 60 | 65 | 80 | 85 | 95 | 105 | 130 |
Drilling diameter max. (mm) | 1500 | 1500 | 1800 | 1800 | 2000 | 2500 | 2500 | 2500 | 3000 | 4000 |
The manufacturer of engine | Caterpillar | Cummins | Caterpillar | Caterpillar | Caterpillar | Caterpillar | Caterpillar | Caterpillar | Caterpillar | Caterpillar |
The mode of the engine | C 6.4 | 6BTA5.9 C169 | C 7 electronic fuel injection | C 7 electronic fuel injection | C 9 electronic fuel injection | C 9 electronic fuel injection | C 9 electronic fuel injection | C 13 electronic fuel injection | C 15 electronic fuel injection | C 18 electronic fuel injection |
Engine power (KW) | 110 | 125 | 187 | 187 | 213 | 261 | 261 | 305 | 335 | 412 |
Chassis model | CAT 323D | ZJ12A | CAT329D | CAT329D | CAT336D | CAT336D | CAT336D | CAT345D | CAT365D | CAT385C |
Traction force (KN) | 380 | 225 | 420 | 420 | 610 | 510 | 510 | 700 | 896 | 1025 |
Drilling Speed (rpm) | 632 | 630 | 727 | 827 | 627 | 627 | 623 | 623 | 621 | 620 |
Max pull-down piston push/pull (KN) | 100/140 | 100/140 | 150/190 | 150/190 | 180/200 | 180/200 | 180/200 | 400/400 | 440/440 | 440/440 |
Pull down poston stroke (mm) | 3500 | 4000 | 4500 | 4500 | 5300 | 5300 | 5300 | 14000 | 16000 | 13000 |
Main winch pulling force (the firstlayer ) (KN) | 150 | 152 | 170 | 170 | 200 | 240 | 240 | 300 | 350 | 547 |
Main rope diameter (mm) | 26 | 26 | 26 | 26 | 28 | 32 | 30 | 36 | 40 | 42 |
Main wich pulling speed (m/min) | 75 | 70 | 78 | 78 | 78 | 63 | 63 | 66 | 65 | 3051 |
Auxilary winch pulling force (first layer) (KN) | 50 | 60 | 80 | 80 | 110 | 110 | 110 | 120 | 120 | 130 |
Auxilary rope diameter (mm) | 16 | 16 | 18 | 18 | 20 | 20 | 20 | 20 | 20 | 28 |
Auxiliary winch pulling speed (m/min) | 90 | 77 | 70 | 70 | 68 | 65 | 66 | 72 | 72 | 70 |
Overall width/height in drilling position (mm) | 4300/1758 3 | 4000 / 1846 2 | 4300 / 2017 1 | 4300 / 2017 1 | 4300 / 2130 0 | 4300 / 2244 0 | 4300 / 2301 8 | 4400 / 2620 0 | 5500 / 2765 0 | 6300 / 3367 0 |
Overall length / width/ height in transport position (mm) | 12700/3020/3273 | 13016/3000/3140 | 14250/3000/3273 | 14250/3000/3273 | 15200/3000/3470 | 14500/3000/3470 | 15756/3000/3470 | 7787/3000/3442 | 10500/3900/3400 | 25000/4000/3400 |
Weight with standard drilling bar (t) | 46 | 47 | 55.5 | 55.5 | 65 | 73 | 78 | 105 | 130 | 192 |
* Constant technical improvement and correction from manufacturers without notice. |