The motion sensors uses infrared to detect movement in a 170 field with a range of 7 meters. I use these to detect motion in the kitchen, bathroom, bedroom corridor and trigger relevant automations. mostly turning on lights. E.g. after the alarm clock goes off in the morning there's a 15min window in which the corridor sensor will turn on lights in the bathroom and kitchen areas.
These sensors communicate over the Zigbee protocol. Zigbee uses a 2.4GHz band that's similar to Wifi. It's main advantage is however that it forms a mesh network. So a tiny sensor running on a button cell doesn't have to connect at a central hub but rather uses the nearest mains powered device to repeat its signal. Since most of the devices are also controlled over Zigbee I in any project have a fairly extensive Zigbee mesh and these sensors never need to broadcast very far. In general the button cell of most of the sensors seems to last between 1-2years before needing to be replaced.

This sensors consists of itself and a little magnet that's attached to a door or window. It sends a state update when it's opened or closed. These sensors can be used to trigger automations when the apartment door is opened as well as for general state monitoring.

These sensors communicate over the Zigbee protocol. Zigbee uses a 2.4GHz band that's similar to Wifi. It's main advantage is however that it forms a mesh network. So a tiny sensor running on a button cell doesn't have to connect at a central hub but rather uses the nearest mains powered device to repeat its signal. Since most of the devices are also controlled over Zigbee I in any project have a fairly extensive Zigbee mesh and these sensors never need to broadcast very far. In general the button cell of most of the sensors seems to last between 1-2years before needing to be replaced.

• Detection Performance
• Detection MethodPassive Infrared
• Detection Range15m
• Detection Angle90
• Detection Zones84
• Detectable Speed0.32m/s
• SensitivityHigh;Auto;Pet
• Pet Immunity30Kg
• White Light Filter6500lux
• Digital Temperature CompensationSupport
• Creep Zone ProtectionSupport

• Feature
• Digital ProcessingSupport
• Sealed OpticsSupport
• Tamper ProtectionFront;Rear
• Environment Temperature IndicatorSupport
• Signal Strength IndicatorSupport

• Interface
• Power SwitchPower Up Enrolling
• LED IndicatorBlue (Alarm)

• Transmission
• Transmission TechnologyTri-X Wireless
• Transmission MethodTwo-Way RF Wireless
• Transmission Frequency868MHz
• Transmission SecurityAES-128 Encryption
• Transmission Range(Free Space)1.6Km
• Frequency HoppingSupport
• Enrolling MethodPower up;Remote ID;QR Code

• Electrical Characteristics
• Standard Battery LifeUp to 5 years (standby time)
• Power SupplyBattery Powered
• Battery TypeCR123A 1
• Typical Voltage3V

• General
• Operation Temperature-10C to 55C (14 F to 131 F)
• Storage Temperature-20C to 60C (-4 F to 140 F)
• Operation Humidity10% to 90%
• Dimension(WxHxD)65.5 mm 103 mm 48.5 mm
• Weight128 g
• Mounting Height1.8 m to 2.4 m
• Mounting MethodWall
• Application ScenarioIndoor
• BracketOptional Wall & Ceiling Accessory

The motion sensors uses infrared to detect movement in a 170 field with a range of 7 meters. I use these to detect motion in the kitchen, bathroom, bedroom corridor and trigger relevant automations. mostly turning on lights. E.g. after the alarm clock goes off in the morning there's a 15min window in which the corridor sensor will turn on lights in the bathroom and kitchen areas.
These sensors communicate over the Zigbee protocol. Zigbee uses a 2.4GHz band that's similar to Wifi. It's main advantage is however that it forms a mesh network. So a tiny sensor running on a button cell doesn't have to connect at a central hub but rather uses the nearest mains powered device to repeat its signal. Since most of the devices are also controlled over Zigbee I in any project have a fairly extensive Zigbee mesh and these sensors never need to broadcast very far. In general the button cell of most of the sensors seems to last between 1-2years before needing to be replaced.

This sensors consists of itself and a little magnet that's attached to a door or window. It sends a state update when it's opened or closed. These sensors can be used to trigger automations when the apartment door is opened as well as for general state monitoring.

These sensors communicate over the Zigbee protocol. Zigbee uses a 2.4GHz band that's similar to Wifi. It's main advantage is however that it forms a mesh network. So a tiny sensor running on a button cell doesn't have to connect at a central hub but rather uses the nearest mains powered device to repeat its signal. Since most of the devices are also controlled over Zigbee I in any project have a fairly extensive Zigbee mesh and these sensors never need to broadcast very far. In general the button cell of most of the sensors seems to last between 1-2years before needing to be replaced.

• Detection Performance
• Detection MethodPassive Infrared
• Detection Range15m
• Detection Angle90
• Detection Zones84
• Detectable Speed0.32m/s
• SensitivityHigh;Auto;Pet
• Pet Immunity30Kg
• White Light Filter6500lux
• Digital Temperature CompensationSupport
• Creep Zone ProtectionSupport

• Feature
• Digital ProcessingSupport
• Sealed OpticsSupport
• Tamper ProtectionFront;Rear
• Environment Temperature IndicatorSupport
• Signal Strength IndicatorSupport

• Interface
• Power SwitchPower Up Enrolling
• LED IndicatorBlue (Alarm)

• Transmission
• Transmission TechnologyTri-X Wireless
• Transmission MethodTwo-Way RF Wireless
• Transmission Frequency868MHz
• Transmission SecurityAES-128 Encryption
• Transmission Range(Free Space)1.6Km
• Frequency HoppingSupport
• Enrolling MethodPower up;Remote ID;QR Code

• Electrical Characteristics
• Standard Battery LifeUp to 5 years (standby time)
• Power SupplyBattery Powered
• Battery TypeCR123A 1
• Typical Voltage3V

• General
• Operation Temperature-10C to 55C (14 F to 131 F)
• Storage Temperature-20C to 60C (-4 F to 140 F)
• Operation Humidity10% to 90%
• Dimension(WxHxD)65.5 mm 103 mm 48.5 mm
• Weight128 g
• Mounting Height1.8 m to 2.4 m
• Mounting MethodWall
• Application ScenarioIndoor
• BracketOptional Wall & Ceiling Accessory