Vedanta Infratech

Bodakdev, Ahmedabad, Gujarat

VIPL 790Wis a Short Distance IR Sensor. Its ON or OFF is controlled by the opening and closing of the door. When you open the door, the sensor detects the motion and turn on the light. The light will be switched off until the door is closed. Specifications Power source : 110-240V/AC Power Frequency : 50/60Hz Rated Current : 5A Detection Distance : 5-6cm Working Temperature : - 20 + 50 C Rated Load (incandescent lamp) : Max.500W (220-240V/AC) Rated Load (energy-saving lamp) : 200W (220-240V/AC)

Wardrobe / Cabinet Sensor 220 VAC Type

• Lighting for stairwell, check this 32CH motion sensor led stair lights controller, automatically sense your movements within 3 meters, the step lights come on in sequence, people go and the led stair tread lights go out.
• The led lighting speed can be adjusted freely. The steps quantity of this LED stair controller is 32. Two motion sensors are installed on both ends of the staircase. Fast connector, easy installation.
• The first step light connects to the "1" mark of the led controller and the second is connected to the "2" and the others so on.
• Professional installation knowledge required, check the wiring first, do not have positive and negative overlap or may touch together, and ensure that there is no positive and negative short circuit before powering on, If you are not professional installer we sugggest you to read the wiring disgram etc before buying.t
• If the positive and negative terminals are connected to each other, it will cause burnout. And this defect not covered in warranty.

BULLET POINTS

Adaptable solutions for different types of stairs

Complete equipment can be built in new buildings or existing stairs

Energy-saving LED lights and aesthetic design

Regardless of the width of the steps, the stairs can be illuminated.

The kit is easy to install and use

Lights are automatically turned on and off when needed

Packing list:

1*32 steps LED stair controller

2* motion sensors

2pcs*connector line (Red: V+, Blue: V-), for extention of wire you can use your own DC wire.

2*5m/16.4ft Induction extension cord (can be used for motion sensors)

Vision Hand waving Sensor is engineered with modernistic design to Light up the utility areas in a jiffy just by waving your hand.
Benefits of Using Wardrobe/Cabinet Sensors
• Premium Look
• Compatible with AC/DC lights
• Compact Design
• Automatically switches on and off the lights with hand waving gesture.
Area of Application
• Kitchen cabinets
• Utility rooms.
• Touchless switch applications and many more.