Capacities starting from 200 LPH to 20, 000 LPH:-

System consists of the following system:-
a) A hot water generation system:-

-Steam pipe with bypass assembly to transfer the steam from boiler to hot water PHE.The pipeline consists of auto control steam valves, gun metal valves and pressure gauges.

-Hot water PHE to generate hot water from steam.The outlet of PHE consists of steam trap for effective condensation and creating back pressure for steam.

-The system consists of hot water pump, buffer vessels, safety valves and make up line for water.

b) Milk Pasteuriser PHE plate pack :-

-The Multi-section PHE plate pack is used to heat the milk from room temp. to pasteurisation temp.Milk gets hold in holding tube and gets chilled to 4 degree celcius after pasteurisation.
-Provision of milk separator and homogenizer

-Regeneration efficiency upto 93%

c) Auto Control Valve:-

Auto control valve to forward/divert the milk in case temp. reaches set point.

d) Accessories

-Float balance tank

-Milk pump

-Milk pipeline and water pipeline

-Milk valve

- Temp. sensors

e) Electrical panel

-Panel to start motors

-Flow controller for milk

-Steam controller for steam

-On/Off;Auto/Manual;Forward/Divert Switches;

f)Holding the milk from 20 sec to 15 mins. depending upon the process

g)SS skid frame to mount all the accessories

-Insulated storage tank to store the milk at desired temp. for longer durations.

-The tank is provided with insulation in the outer jacket to prevent the temp. dropping.The tank can also be provided with slow speed agitator for regular mixing of the milk.

Capacity-300 litre to 20, 000 litre

Storage tanks are available in many shapes: vertical and horizontal cylindrical; open top and closed top; flat bottom, cone bottom, slope bottom and dish bottom. Large tanks tend to be vertical cylindrical, or to have rounded corners transition from vertical side wall to bottom profile, to easier withstand hydraulic hydro statically induced pressure of contained liquid. Most container tanks for handling liquids during transportation are designed to handle varying degrees of pressure.

Capacities starting from 200 LPH to 20, 000 LPH:-

System consists of the following system:-
a) A hot water generation system:-

-Steam pipe with bypass assembly to transfer the steam from boiler to hot water PHE.The pipeline consists of auto control steam valves, gun metal valves and pressure gauges.

-Hot water PHE to generate hot water from steam.The outlet of PHE consists of steam trap for effective condensation and creating back pressure for steam.

-The system consists of hot water pump, buffer vessels, safety valves and make up line for water.

b) Milk Pasteuriser PHE plate pack :-

-The Multi-section PHE plate pack is used to heat the milk from room temp. to pasteurisation temp.Milk gets hold in holding tube and gets chilled to 4 degree celcius after pasteurisation.
-Provision of milk separator and homogenizer

-Regeneration efficiency upto 93%

c) Auto Control Valve:-

Auto control valve to forward/divert the milk in case temp. reaches set point.

d) Accessories

-Float balance tank

-Milk pump

-Milk pipeline and water pipeline

-Milk valve

- Temp. sensors

e) Electrical panel

-Panel to start motors

-Flow controller for milk

-Steam controller for steam

-On/Off;Auto/Manual;Forward/Divert Switches;

f)Holding the milk from 20 sec to 15 mins. depending upon the process

g)SS skid frame to mount all the accessories

-Insulated storage tank to store the milk at desired temp. for longer durations.

-The tank is provided with insulation in the outer jacket to prevent the temp. dropping.The tank can also be provided with slow speed agitator for regular mixing of the milk.

Capacity-300 litre to 20, 000 litre

Storage tanks are available in many shapes: vertical and horizontal cylindrical; open top and closed top; flat bottom, cone bottom, slope bottom and dish bottom. Large tanks tend to be vertical cylindrical, or to have rounded corners transition from vertical side wall to bottom profile, to easier withstand hydraulic hydro statically induced pressure of contained liquid. Most container tanks for handling liquids during transportation are designed to handle varying degrees of pressure.