VCC Shuttering House

Chandigarh

Shuttering stores in panchkula, chandigarh, mohali, zirakpur, dhkauli, panitpat, karnal, ludhaiana, supplier on renthire basis. Our product range consist of steel plates props cuplocks jacks channels clamps cuplors.we supply these products to chandigarh, panchkula, mohali, zirakpur, dhakauli and other parts of punjab, haryana, himachal pradesh.our products are made of high quality materials and procured from very trusted suppiers. We supply the shuttering and scaffolding material for the construction of mega projectslike malls, multiplexes, housing societies, it buildings, factories, commercial complexes, townships, shopping arcades throughout the country at very competeive rates.firm is in existence since last 25 years and has reach.ed today at a pioneer level throughthe efforts & hard work our dedicated team.contact us for concrete wall formwork, roof scaffolding formworks, scaffolding brackets & scaffolding formworks.

Shuttering stores & suppliers for rent hire scaffolding, props, cuplocks, ambala, kurukshetra, panchkula, chandigarh, mohali, zirakpur, dhkauli, panitpat, karnal, ludhaiana, supplier on renthire basis. Our product range consist of steel plates props cuplocks jacks channels clamps cuplors.we supply these products to chandigarh, panchkula, mohali, zirakpur, dhakauli and other parts of punjab, haryana, himachal pradesh.our products are made of high quality materials and procured from very trusted suppiers. We supply the shuttering and scaffolding material for the construction of mega projectslike malls, multiplexes, housing societies, it buildings, factories, commercial complexes, townships, shopping arcades throughout the country at very competeive rates.firm is in existence since last 25 years and has reach.ed today at a pioneer level throughthe efforts & hard work our dedicated team.contact us for concrete wall formwork, roof scaffolding formworks, scaffolding brackets & scaffolding formworks.

Manufactured out of 10Gauge (3.1 mm) of 12 Gauge (2.5mm) sheet and angle 35*35*5 Or 35*5mm flat.Sizes as required by the clients.

We are highly acknowledge name engaged as manufacturer, exporter and supplier of prop jack. Precisely designed and manufactured by using finest quality steel, these jacks are used for supporting slab, beams columns and walls. Our offered jacks are designed by skilled professionals, which makes them robust in design and highly stable. Available with us in different specifications, customer can avail these at affordable price tags. Props are an economic and popular method of support in the building industry today. Ideally suited to all kind of building construction and repair. features : top quality materialhighly durablesuperlative strengtheconomical completely adjustable for height.extremely ro', easy to handle, compact to store.quickly and simply erectedno loose parts, no tools necessary.head plates suit modern formwork systems for slab construction.size 0m to 4m confirms fully to bs 4047:1966 a threaded external tube in combination with an internal tube with intermediate holes gives the desirable extended size within the maximum and minimum extended range of the prop. It's a self-cleaning stub on the collar nut, when rotated. Automatically cleans the threads of dirt, cement and other foreign substances that hamper quick and easy adjustment. Simple insertion of a rod in the holed boss on the collar nut facilitates of the collar nut in confined spaces. compatiable holes on base plates and head plates of 150*150 mm help double staging when required. Beam head version comprising of 300*100mm head plates is also available for wider support. Stir-up heads snugly fit into either plate without any additional fastening.

Superlative range of joint pin. Sturdily constructed cuplocks joint pins are widely used for connecting two cuplocks vertically. We utilize best available technologies to develop these pins and offer durable and reliable range to our clients. Resistant to rust and abrasion, our pins are widely demanded by large number of clients. Distance between the front end hole to rear end hole of this pin is 50.8 mm and diameter is 38 mm. One can avail these pins at cost effective prices.

cuplocks standards are used as vertical part of scaffolding system. cuplocks are very trusted and frequently used system of scaffolding. they are very popular due to special node point connection which ensures its speedy erectionremoval and safety of men and materials at heights. cuplocks are known for their flexibility as they can be installed for straight, curved and circular shapes. its easy and fast installation ensures saving of at least 80 % of labor cost and time. after fastening of four horizontals at one node point cuplock standards it become a very strong and rigid system for load bearing or to be used as a platform for supporting men and materials at heights. these cuplock standards are very resistant to corrosion and any kind of wear and tear. cuplock standards dont have any loose part and require minimal space for storage. they are painted with high protection paint to deformation and cracks. with the use of high-grade material, a very resistant cuplock standards can be manufactured which can be reused many times. features : corrosion resistantcan be reused for many timesknown for their load bearing capacityresistant to damagesensures safety of men and materials at heights

the locking device is formed by two cups at 500 mm cc intervalsprovides firm grip to ledger blades making the connection rigid and to endure rough site handlingwelded bottom cups are pressed from high quality steel and captive mobiletop cups made out of malleable castingthe bottom cup is welded to vertical tube and a movable upper cup is free to move up and downaccess standards are provided with integral 500 mmlong spigots for making easy vertical connections size available: 3.00 mt2.50 mt2.00 mt1.50 mt1.00 mt cup lock ledger (horizontal)features: locked in place by corresponding upper cupsledgers are available in various sizes to provide the desired grid dimension of the workledgers are made using 48.3 mm o.d. Tube with forged steel blades at the endsthe blades are placed into the bottom cups of the vertical size available: 0.60 mm0.75 mm1.00 mm1.25 mm1.50 mm

We are one step ahead of our competitors in manufacturing and supplying a wide range of m. S. Shuttering plates. Widely used in large construction sites, our devices are suitable to avoid danger and to offer maximum safety. We use high quality stainless steel and wrinkle free 3.15 mm thickness hot rolled sheets which ensures maximum silkiness and smoothness to the ceilings. One can also avail from us mig welded steel shuttering plates which are extensively appreciated for durability, smooth finish, high tensile strength, easy maintenance and reliability. The attachment of side base (flat) of 40 mm x 6 mm makes these plates more strong and durable. features: rugged constructioneasy to maintainreliability

We are offering a wide range of ms channel. These are used to support the plates which are properly drilled. Bits are properly welded onto channels to provide support to the plates. Sizes: 75 mm x 40 mm and of varying lengths.