Vatturkar Industrial

Shivane, Pune, Maharashtra

Our comprehensive range of fittings offer an unlimited installation possibilities. Designed according to the law of Fluid Dynamics our fittings are capable of positioning the sensor accurately in any piping to ensure correct reading of flow in any situation.

A/J 210 electronic flow monitor are high speed micro- controller based units with a high resolution back-lit display.By using front panel tactile keys, one can view / program different parameters A-210 / J-210 is a Digital RateIndicator and Totaliser suitable for VATS sensors or others giving pulse output of 200 Hz max.A/ J-210 one can readthe flow rate in LPH, M3 / Hr only and corresponding Total reading in Litre or M3 only. Our IP 65 grade enclosuresmake our flow meter versatile on both Panel & Field uses Along with these two consecutive displays these monitorsalso have relays to operate in various modes such as: Batcher, Pulser, and Rate Switch

Our comprehensive range of fittings offer an unlimited installation possibilities. Designed according to the law of Fluid Dynamics our fittings are capable of positioning the sensor accurately in any piping to ensure correct reading of flow in any situation.

AJ - 510 are most advance monitors with built in Re-Transmission facility .AJ 510 electronic flow monitor are highspeed micro- controller based units with a high resolution back-lit display. By using front panel tactile keys, one canview program different parameters one can read the flow rate in LPH, M3 Hr only and corresponding Total readingin Liter or M3only. Our IP 65 grade enclosures make our flow meter versatile on both Panel & Field uses Along withthese two consecutive displays these monitors also have relays to operate in various modes such as: Batcher, Pulser, and Rate Switch. As standard Fluid Computer provide 4-20 mA current output proportional to the flow rateflowvelocity. With optional addition on cards these monitors can also provide RS-232 or RS-485 output for furtheradvance connectivity. With this facility direct printing option or computer connectivity becomes simple.

The VATS mhoCounter is yet another step forward to deliver convenience & to the point technology in a compact package. With our experience of a wide range of installations, we came out with easy to fit conductivity TDS meters. The mhoCounter CT-10 is a conductivity indicator. Features:Easy installationDisplay in microSCM, ppm (TDS)Customized 4 digit LCDWeather proof enclosureTactile keys on front panelEasy programming with front panel keysBranded meter at the most economic price.Clearly marked terminal labels

The VATS mhoCounter is yet another step forward to deliver convenience & to the point technology in a compact package. With our experience of a wide range of installations, we came out with easy to fit conductivity TDS meters. The mhoCounter CT-10 is a conductivity indicator & mhoCounter CT-11 is the meter with relay output option, which is programmable. Microprocessor based electronics allow wide operating range and long term signal stability. Optional relays provide control for adjustment or alarms. Also the meter comes with saddle mounting option or standard fittings to adopt to any process flow solution.

AJ 110 electronic flow monitor are high speed micro- controller based units with a high resolution back-litdisplay. By using front panel tactile keys, one can view program different parameters A-110 J-110 is a DigitalRate Indicator suitable for VATS sensors or others giving pulse output of 200 Hz max.A J-110 one can read theflow rate in LPH, M3 Hr only and corresponding. Our IP 65 grade enclosures make our flow meter versatile onboth Panel & Field uses.

Our comprehensive range of fittings offer an unlimited installation possibilities. Designed according to the law of fluid dynamics our fittings are capable of positioning the sensor accurately in any piping to ensure correct reading of flow in any situation.

The VATS PANERA is a robust & compact water dispenser suitable for industries like construction where proportion of water to cement is crucial.
PANERA reliably dispenses the desired quantity of water batch after batch. Electrical accessories are protected by the unique design and electronic instrumentation is in IP-65 protection grade to protect from dust and water.

Features:
Advance GSM Technology and simplicity.
Protection Structure IP 65.
Password Protected Meter.
Display Total Rate.
Output through SMS as per set schedule
Cost effective.
Lower installation and maintenance cost.
Sending through GSM/CDMA Network.
Maximum 3 SMS .
SMS Schedule - Max. 1 SMS/HR

Applications:
Energy
Agriculture
Water
Audit
Paper and pulp
Food and beverages
Waste water
Power
Textiles

The VATS J110 is a field mounted flow meter using VATS insertion type Flow Sensor. It gives a digital readout of the flow in M3/Hr, LPH or LPM also. These are the most user friendly meters, anybody can easily calibrate & install them online without any technical knowledge.

These meters use advanced micro controller to calculate the flow rate

Wiring Connections:
Red wire: Supply 5-12 VDC
Black wire: Output signal TTL
Shield wire: Common
Note: Sensor is reverse polarity protected.

The P-420 (encapsulated PH Transmitter) is a 2-wire, 4-20 mA PH transmitter having encapsulated construction, High performance and compact size. It can be interfaced with any display and control devices requiring a 4-20 mA input.

Transmitter accepts input from any PH combination electrode through BNC Connector. It transforms the PH signal to a 4-20 mA Current proportional to the PH level 4-20 Output from PH transmitter can be transmitted over two wires to control device. Same two wires used to suppy power to loop.

Any 12-24 VDC Power supply can be used. There are two adjustments on transmitter to standardize probes for "ASY" and "SLP".

Features:
4-20 mA Loop Powered
Easy To Use
Compact Size
Adjustable ASY and SLP

Microprocessor based electronics allow wide operating range and long term signal stability. Optional relays provide control for adjustment or alarms. Also the meter comes with saddle mounting option or standard fittings to adopt to any process flow solution. CT 20 can be used for conductance, TDS signal transmission and display with 4-20 mA OP. Features:Easy installationDisplay in microSCM, ppm (TDS)Customized 4 digit LCDWeather proof enclosureTactile keys on front panelEasy programming with front panel keysBranded meter at the most economic price.Clearly marked terminal labels4-20 mA Current OP

The VATS A110 is a field mounted flow meter using VATS insertion type Flow Sensor. It gives a digital readout of the flow in M3/Hr, LPH or LPM also. These are the most user friendly meters, anybody can easily calibrate & install them online without any technical knowledge. These meters use advanced micro controller to calculate the flow rate.

Wiring Details:
Wiring connections
Red wire: Supply 5-12 VDC
Blackwire: Output signal TTL
Shield wire: Common

The VATS mhoCounter is yet another step forward to deliver convenience & to the point technology in a compact package. With our experience of a wide range of installations, we came out with easy to fit conductivity / TDS meters.

Microprocessor based electronics allow wide operating range and long term signal stability. Optional relays provide control for adjustment or alarms. Also the meter comes with saddle mounting option or standard fittings to adopt to any process flow solution. CT 20 can be used for conductance, TDS signal transmission and display with 4-20 mA O/P.

Features:
Easy installation
Display in microS/CM, ppm (TDS)
Customized 4 digit LCD
Weather proof enclosure
Tactile keys on front panel
Easy programming with front panel keys
Branded meter at the most economic price.
Clearly marked terminal labels
4-20 mA Current O/P

The Next Level of Convenience .Take the trouble out from assembly work.The most convenient solution as easy as 1, 2, 3 . 1. Drill a hole of 35 mm in the line.2. Insert the saddle fitting.3. Strap it up with the clamps. Done!

Turbine Flocounter+ is another step to delivver superb Technology and convenience. All in one compact package to suit the growing needs to industry.
Our Whetherproof grade enclosures make our flow mwter versatile for field uses. The "Easy to fit" Flocounter increase the efficiency of any plant. This easily programmable, horizontal or vertically mountable Flocounter provides schematic perfection. Variety of materials in sensor like ABS; SS.

Features:
Advance Technology and simplicity.
Protection Structure Whetherproof.
Password Protected Meter.
Display Flow Rate /Total.
Cost Effective.
Lower Installation and maintenance Cost.
Battery Operated.

Our comprehensive range of fittings offer an unlimited installation possibilities.
Designed according to the law of Fluid Dynamics our fittings are capable of positioning the sensor accurately in any piping to ensure correct reading of flow in any situation

Flocounter is another step to deliver super Technology and convenience. All in one compact package to suit the growing needs of industry. Our IP 65 grade enclosures make our flow meter versatile on both Panel & Field use.

The Easy to fit Flocounter increase the efficiency of any plant.All this available with two power sources and most competitive OEM price. This easily programmable, horizontal or vertically mountable Flocounter provides schematic perfection. Variety of materials is available in installation fittings like ABS; PVC and SS.These fittings include Tees, Saddles, Thread Ends and Weldon Adaptor

Features:
Advance Technology and simplicity.
Protection Structure IP 65.
Password Protected Meter.
High response Time.
Display Flow Rate /Total.
Cost Effective.
Lower Installation and maintenance Cost.
Mains operated and also battery operated.

Applications:
Water Treatment
Agriculture
Construction
Paper and Pulp
food and beverages
Waste Water
Power
Textiles