Vasudev Water Solution Vapi, Gujarat

we offer high performance FRP pressure vessels that are fabricated by us in a variety of dimensions to meet the specific needs of our clients. FRP vessels offered by us are suitable for different water treatment products such as Filters, softeners and DM plants. Our rage is known for its features such as Economical Price, Durability, and Efficiency. Offered in different dimensions, we also customize these as per the requirement of our clients.

We are engaged in offering an excellent quality range of side stream filtration. The offered filter is manufactured with premium grade material and advanced technology in accordance with set standards. This product is best for removing solids & other impurities from water. Offered filter is easy to install in various places for better solution. Feature: high performance reduced maintenance costs long working life the installation of a side stream filter is a capital expense, which may be hard to justify in most plants. Consider the following as indications that a plant should look into the possibility of installing a filter. The system is having a difficult biological problem even though a good biocide program is in effect heat exchangers are opening dirty even though a good antifoulant program is being used excessive corrosion rates can be traced to fouling loss of heat transfer is attributed to deposition rather than corrosion high levels of solids are building up in the sump the primary makeup is from an unclarified water source (river, sewage treatment, etc.) that is high in suspended solids andor iron heat exchangers require frequent mechanical cleanings as stated, these are indicative only. By identifying potential threats to your systems and solutions to those threats, you can determine the paybacks of installing a side stream filtration system. Often the payback is less time than you would think. This will vary widely from system to system; the final decision will always rest with a plant, and will always be decided on economic grounds. Benefits: once a problem has been recognized, several benefits can result from the use of a side stream filter. Obviously, not all of those listed below apply to all systems, and good judgment must be applied before making any claims. However, bearing that in mind, the following benefits can be realized: since solids are removed from the system, the corrosion inhibitor will lay down its protective film on clean rather than dirty surfaces, thereby reducing corrosion rates and increasing equipment life. When used with good chemical treatment, the filter will keep the system much cleaner, and, as a result, the need for mechanical cleaning of exchangers and sumps is reduced. A cleaner system means better heat-transfer rates for longer periods of time. In some cases, the removal of suspended solids from the circulating water allows higher cycle. Large biological growths and dead organisms are removed with a side stream filter. This reduces chlorine demand and makes non oxidizing biocide more effective.

We offer reverse osmosis plants according to the need for tap water, brackish water & sea water application. The production range starts from 100 lph (liter per hour) to 100 m3 per hour for 400 tds to 45000 tds.

We are offering industrial reverse osmosis plant, we have with us rich experience in successfully handling the demands of precision designed and optimally functioning industrial ro reverse osmosis plants. These industrial reverse osmosis plants can be also made available in customized specifications with configurations to suit individual requirements of output water that varies from normal drinking application to usage like in pharmaceutical production, food processing and as boiler feeding requirement. Here, our expertise lies in offering industrial reverse osmosis plants in different flow rates for 100 lph to 25000 lph with the tds reduction capacity that goes as high as 90-99%. Purification process: the offered ro plants are designed to successfully handle demands of water filtration through utilizing following processes of purification: 1. intake 2. pre-treatment 3. high pressure pump 4. membrane assembly 5. ph adjustment 6. disinfection applications - reverse osmosis systems some of the applications these ro water filtration systems are used in include providing pure water for: safe drinking water boiler feed water ion exchange pre-treatment beverage production ro system manufactured in a well integrated industrial reverse osmosis plant use of approved and tested components in system construction industrial ro plants configured for achieving optimum recovery of water adjustable valve provision for adjusting waste water and recycle flow of water offering easy and quick installation output production rates from 2000 gpd to 20 000 gpd construction: - point of use systems some of the salient construction highlights of these ro plants include: 1. high capacity thin film composite membrane 2. steel frames duly pre treated for rust proofing with powder coated finish 3. gauges options at pre and post filter levels 4. in-built pressure switch for storage tank 5. high and low pressure switch provision 6. provision of high capacity rotary pump 7. solenoid valve for feed water inlet 8. pre filtration console.

We are one of the trusted Effluent Wastewater Treatment Plant Manufacturers, based in India. We offer a wide gamut of Effluent Water Treatment Plants that are designed to treat the effluent coming from different areas of the plant. The treatment of different effluents varies with the type of effluent. Our Effluent Wastewater Treatment Plants are used for treatment of water, waste water and liquid having suspended and colloidal particles. The Water treatment plants supplied by us works on the principle of settling under gravity through inclined plates within large projected surface area. Features :

• Easy Installation
• Simple to operate
• Made as per international standards
• Made as per international standards
• Durable
• Effective Treatment of contaminated water

Water Effluent TreatmentWater effluent treatment plant is designed to treat effluent mainly containing oily effluent. The oily water from the Transformer Area, Turbine building, Workshop, etc is collected in common collection sump from where water is pumped through the Plate Interceptor. Oil separated from Plate Interceptor is collected in drums & clear water is lead to central monitoring basin through gravity. Sludge generated from the Plate Interceptor is led to the Sludge Pit for further treatment. Service Water Effluent TreatmentThe system is envisaged for treatment of effluent mainly containing turbidity and suspended solids. Service water washing effluent from different areas is collected in common collection pit and then pumped to the flash mixer where chemical mixing takes place. The effluent is dosed with Alum, Lime and Polyelectrolyte to coagulate and flocculate the suspended / colloidal matter. Water then flows through the flocculation tank for flocculation and is finally carried over to tube/lamella settler through gravity where clarification of water takes place. Clarified water is then led to common monitoring basin through gravity. Sludge generated in the process shall be collected and pumped for further treatment. Sludge Handling SystemSludge collected from different clarifiers is pumped through the Sludge Thickener. Thickened sludge is the further pumped to centrifuge. Sludge cakes generated from centrifuge are disposed off. Supernatant is recycled back to the main clarifier.

The water which is natural has several dissolved salts in diluted form which can be harmful to health. We as a prominent Demineralisation Plant Manufacturer and Supplier, have taken the initiative to develop Demineralized Water Plants which has the capacity to remove harmful salts and minerals from water making it pure, potable and drinkable. Our Demineralised Plants are designed in a way that makes it easy to install and simple to operate. Features

• Easy to install
• Simple to operate
• Complete with regeneration equipment & control
• Remove harmful salts and minerals from water

Main Components

• Mild steel/FRP pressure vessels provided with internal fittings
• Initial charge of caution and anion exchange resin
• One set of regeneration equipment including hydraulic ejectors, acid & alkali tanks
• One set of frontal pipe work & valves.
• One mild steel base frame for mounting caution & anion units
• One conductivity meter to monitor treated water quality

We are a distinguished Manufacturer, Supplier and Exporter of Water Softeners. Designed using advanced technology; our Water Softeners are suitable for deionizers, demineralizers, and dealkalizers.  Few words that better describe our Water Softeners are high weather resistance, leak proof design, and robust construction. We have all the in-house capabilities to meet bulk orders of Water Softeners in time. Buyers can obtain the Water Softeners at affordable rates from us. 

 

Feature :

• Weather resistance
• Leak proof
• Strongly built

 
Applications :

• Potable water
• Contact process water
• Boiler & reactor feed and make-up water
• Cooling tower make-up water
• High purity water
• Large laundry and restaurant facilities
• Protection of heat transfer elements and spray nozzles
• Pre-treatment for reverse osmosis or deionizer systems
• Wastewater re-use
• Groundwater remediation

We are an established Manufacturer, Supplier and Exporter of Reverse Osmosis Plants. Our Reverse Osmosis Plants have excellent spirally wounded thin film composite membranes and FRP or stainless steel housing. We are capable of customizing the Osmosis Plants to suit individual requirements of output water ranging from normal drinking application to usage in food processing plants. One can obtain the Osmosis Plants at nominal rates from us.
Features :

• A pre validated & pre tested skid mounted solution
• Complies and supersedes latest US, European & Indian Pharma standards for purified water generation and distribution
• Designed & manufactured as per Pharma Engg and Industrial standards
• CGMP & GAMP compliance
• Standardized product fast track delivery reduced time & compliance cost

Other Details :

• Hot water sanitary (>80C) fully automatic RO-EDI skid
• All bought outs item from reputed suppliers across the globe
• New instant Hot Water Sanitizable EDI to reduce sanitization time by hours
• Sanitary SS 316L RO pressure tubes with TC ends
• SS-316L sanitary polished TC end piping and valves
• Argon/Orbitally Welded Sanitary Piping and Valves
• Variable frequency drive based SS 316 high pressure pump ensures optimized power and lowest operating cost
• SS 316L feed buffer cum sanitization tank with inbuilt Electric Heater control for built in CIP cum hot water sanitization skid
• Flow Range: 100 LPH to 50, 000 LPH
• Material of Construction: SS-316/304/FRP

Advantages :

• Compact and modular RO blocks
• Easy installation, operation and servicing
• Specific selection possible from a wide range
• High level of plant automation
• Visual monitoring system (VMS) for ease of trouble shooting
• Stainless steel multistage centrifugal pump; inline suction and delivery allows easy maintenance and access
• Online product water quality monitoring
• Membrane and pump protection features
• 'RO Advantage' enhanced through
• Minimum pipe length to reduce system resistance
• Easy servicing with QRC (Quick Release Coupling)
• Material of construction: CPVC/SS

Applications :

• Pharmaceuticals & Chemicals
• Textiles
• Auto
• Food Beverages & Breweries
• Boiler & Cooling Towers
• Drinking & Bottled water
• Semi conductors
• Electroplating
• Hotels
• Hospitals
• Captive power plants
• Nuclear power plants
• Refineries
• Thermal power plant
• Product separation and recovery
• Tertiary treatment
• Hemodialysis
• Laboratories
• Process water
• Desalinati

We are a bracketed among the successful Manufacturers, Suppliers and Exporters of Sewage Treatment Plants. The Sewage Treatment Plants we make available are manufactured in compliance with set industrial norms. Our Sewage Treatment Plants are easy to install and maintain. We hold the expertise of delivering bulk orders of the Sewage Treatment Plants within the promised timeframe. One can obtain the Plants at market-leading rates from us.

Features :

• Superior
• Consumption safety
• Solid

Applications:

• Malls,
• Hospitals
• Office Buildings
• Institutions
• Townships/Colonies
• High Rise Building etc.