• Longer life
• Low noise level/vibration
• Easy to operate
• Low oil consumption
• Minimum maintenance
• Low operating costs

• Piston :Automotive type low expansion aluminium alloy .
• Cylinder :Special cost iron, deep " finned for quick heat dissipation .
• Valve Plates :Special Stainless steel material for high resistance and efficiency and for self floating .
• Inter / After Cooler :Deep finned aluminium alloy specially designed to keep temperatures low and minimize formation of carbon .
• Diaphragm Pressure Switch :For efficient automatic On and Off automatic venting and no'load restarting of compressor units, pressure switch / pressure switch with electromagnetic unloader is provided. Made of Carbon steel dynamically balanced with roller bearings .
• Diaphragm Pressure Switch :For efficient automatic On and Off automatic venting and no'load restarting of compressor units, pressure switch / pressure switch with electromagnetic unloader is provided.

• Slow Speed / High Speed Pumps
• High Grade Cast Iron Body
• Cast Iron Impellers
• Available in Single phase / Three phase

• Domestic & agricultural use
• Water circulation & boiler feed
• Fire Fighting

• Openwell Submersible Horizontal Type
• Openwell Submersible Vertical Type

• Made out of high grade cast iron material
• S.S. Shaft and Cast Iron impellers
• Two Water Lubricated carbon bearings used for longer life and smooth operation.
• 2880 RPM 415V, 50 Hz Three phase water cooled motors

• Used in openwell and sump
• Installed inside a sump or in hanging position inside deep openwells
• High head & high discharge applications
• Agriculture lift irrigation, multistoreyed building, Hospitals etc.

Suguna Submersible Motor is a squirrel cage water cooled and water lubricated induction motor. The pumps are of radial / mixed flow type pumps. The bearings are water lubricated.Submersible pumps are for purifying water from deep wells using submerging in water. 4 borewell pumps are used for drawing water from 62-1500ft and can be used for irrigation, sprinkler, residential and for multi storied buildings.

• Borewell Submersible Pumps - V3, V4, V6, V7, V8

• Stainless Steel Motor, housing for longer life
• High Quality imported Carbon thrust Bearing to work at lower voltages
• Stainless Steel Shaft with Coupling
• High Quality Noryl impellers, Diffuser and Pump casing

The borewell compressor pump works on the principle of difference in density of two-inter-connected water columns and the heavier one over balancing the lighter one. Water outflow through delivery pipe will be pulsated. the discharge of water will greatly depend on the yield of the bore. Air distributor fitted at the end makes this operation possible.

• Belt Driven Compressor
• Monobloc Compressor

• Shell moulded casting
• Interchangeable Standardized Parts
• Honed Cylinders to give Extra Long Life
• Crank and connecting Rod are made of special Alloy Steel Forgings
• Needs no footvalve / Jet, hence easy to install and maintain
• Water outflow through delivery pipe will be pulsated and not continuous

• Ideal for lifting water from deep borewells
• Effectively used for agriculture, industry and domestic purposes
• Agricultural

• Pedestal Gear Pump - Light Duty
• Pedestal Gear Pump - Heavy Duty

• Max. pressure: 125 psi
• Lip or packing seals
• Shaft bushings
• Max. viscosity: 500 SSU
• Self-priming
• Bidirectional rotation

• Transfer a wide range of nonabrasive or nonparticulate viscous liquids with a continuous, near-pulseless flow in many industrial, commercial, marine, or agricultural applications.
• All have keyed shafts, a seal flush chamber.
• Cast-iron and bronze models have pressure relief valves. Ball bearings allow use with pulley-drive systems.Note: Higher-viscosity liquids (100, 000 SSU) must be transferred with more horsepower at reduced speeds.

High quality, reliable and heavy type buffering motors for use in industries. Heavy loads can be applied which increases the productivity of the components buffer.

• Quality bearing in rear and front side of rotor
• Dynamically balanced rotor
• Graded winding with copper wires tested with Surge and high voltage testing
• Energy efficient motors

• Textile Mills, Weaving and Power Looms
• Grinders, Polishers, Millers, Gold Jewellery Machines
• Modern Rice Mills, Rubber Coir Industries, Stone Crushers

• High grade cast iron /aluminium body
• Rigid grinding wheel for tough usage
• Fitted with rotary switches
• Custom fit with one side grinding wheel & other side polishing wheel is possible

• Precise grinding of single point high speed steel, cast alloys and carbide tipped tools
• Grinding of knives, chisels, punches in tool rooms & factories

• Longer life
• Low noise level/vibration
• Easy to operate
• Low oil consumption
• Minimum maintenance
• Low operating costs

• Piston :Automotive type low expansion aluminium alloy .
• Cylinder :Special cost iron, deep " finned for quick heat dissipation .
• Valve Plates :Special Stainless steel material for high resistance and efficiency and for self floating .
• Inter / After Cooler :Deep finned aluminium alloy specially designed to keep temperatures low and minimize formation of carbon .
• Diaphragm Pressure Switch :For efficient automatic On and Off automatic venting and no'load restarting of compressor units, pressure switch / pressure switch with electromagnetic unloader is provided. Made of Carbon steel dynamically balanced with roller bearings .
• Diaphragm Pressure Switch :For efficient automatic On and Off automatic venting and no'load restarting of compressor units, pressure switch / pressure switch with electromagnetic unloader is provided.

• Slow Speed / High Speed Pumps
• High Grade Cast Iron Body
• Cast Iron Impellers
• Available in Single phase / Three phase

• Domestic & agricultural use
• Water circulation & boiler feed
• Fire Fighting

• Openwell Submersible Horizontal Type
• Openwell Submersible Vertical Type

• Made out of high grade cast iron material
• S.S. Shaft and Cast Iron impellers
• Two Water Lubricated carbon bearings used for longer life and smooth operation.
• 2880 RPM 415V, 50 Hz Three phase water cooled motors

• Used in openwell and sump
• Installed inside a sump or in hanging position inside deep openwells
• High head & high discharge applications
• Agriculture lift irrigation, multistoreyed building, Hospitals etc.

Suguna Submersible Motor is a squirrel cage water cooled and water lubricated induction motor. The pumps are of radial / mixed flow type pumps. The bearings are water lubricated.Submersible pumps are for purifying water from deep wells using submerging in water. 4 borewell pumps are used for drawing water from 62-1500ft and can be used for irrigation, sprinkler, residential and for multi storied buildings.

• Borewell Submersible Pumps - V3, V4, V6, V7, V8

• Stainless Steel Motor, housing for longer life
• High Quality imported Carbon thrust Bearing to work at lower voltages
• Stainless Steel Shaft with Coupling
• High Quality Noryl impellers, Diffuser and Pump casing

The borewell compressor pump works on the principle of difference in density of two-inter-connected water columns and the heavier one over balancing the lighter one. Water outflow through delivery pipe will be pulsated. the discharge of water will greatly depend on the yield of the bore. Air distributor fitted at the end makes this operation possible.

• Belt Driven Compressor
• Monobloc Compressor

• Shell moulded casting
• Interchangeable Standardized Parts
• Honed Cylinders to give Extra Long Life
• Crank and connecting Rod are made of special Alloy Steel Forgings
• Needs no footvalve / Jet, hence easy to install and maintain
• Water outflow through delivery pipe will be pulsated and not continuous

• Ideal for lifting water from deep borewells
• Effectively used for agriculture, industry and domestic purposes
• Agricultural

• Pedestal Gear Pump - Light Duty
• Pedestal Gear Pump - Heavy Duty

• Max. pressure: 125 psi
• Lip or packing seals
• Shaft bushings
• Max. viscosity: 500 SSU
• Self-priming
• Bidirectional rotation

• Transfer a wide range of nonabrasive or nonparticulate viscous liquids with a continuous, near-pulseless flow in many industrial, commercial, marine, or agricultural applications.
• All have keyed shafts, a seal flush chamber.
• Cast-iron and bronze models have pressure relief valves. Ball bearings allow use with pulley-drive systems.Note: Higher-viscosity liquids (100, 000 SSU) must be transferred with more horsepower at reduced speeds.

High quality, reliable and heavy type buffering motors for use in industries. Heavy loads can be applied which increases the productivity of the components buffer.

• Quality bearing in rear and front side of rotor
• Dynamically balanced rotor
• Graded winding with copper wires tested with Surge and high voltage testing
• Energy efficient motors

• Textile Mills, Weaving and Power Looms
• Grinders, Polishers, Millers, Gold Jewellery Machines
• Modern Rice Mills, Rubber Coir Industries, Stone Crushers

• High grade cast iron /aluminium body
• Rigid grinding wheel for tough usage
• Fitted with rotary switches
• Custom fit with one side grinding wheel & other side polishing wheel is possible

• Precise grinding of single point high speed steel, cast alloys and carbide tipped tools
• Grinding of knives, chisels, punches in tool rooms & factories