GST : 07CNLPS0755A1Z1
Verified
Write a Review
Our Product / Services
Instrumentation & Control Equipment
2 Products availableCentrifugal Pumps
2 Products availableWelding Electrodes
2 Products availableElectrical & Electronic Goods Repair
1 Services availableVariable Speed Motor Drives
1 Products availableIndustrial Relay
1 Products availableOptical Sensors
1 Products availableOur product range contains a wide range of Stainless Steel Centrifugal Pump, Horizontal Centrifugal Pumps, CRI Non Self Priming Pump, Lowara Non Self Priming Pump and Grundfos Non Self Priming Pump
CorroSionBeComeS a ThinGoF tHe paSt.
If you are looking to eliminate the risk of corrosion in pumps andin turn reduce costly downtime, the answer is stainless steel.With its excellent corrosion-resistant properties, stainless steelis by far the best choice for use in industrial applications eitherwhere high standards of hygiene are required or when theliquid pumped is troublesome.
Full range in stainless steel
As one of the leading global manufacturers, Grundfos offersone of the markets most comprehensive ranges of stainlesssteel pumps. Back in 1968, we were the first company to usestainless steel intensively. We continue to improve our productsto ensure that they remain second to none. Today, our stainlesssteel solutions cover every conceivable applications across theproduction floor from the process line to utilities in a variety
of industries, including:
Food and beverage
Pharmaceutical
Biotechnology
Water treatment systems
Semi-conductor manufacturing
Oil and gas/offshore
Mining.
BlueFlux
The Grundfos Blueflux label guaranteesthat a Grundfos motor or frequencyconverter meets or exceeds the directivesand legislative efficiency requirements ofthe future.
In addition to its superior corrosion resistance, stainless steelprovides a number of other benefits. Its hygienic, non-poroussurface is easy to clean and the protective chromium oxide filmprevents the pumped liquid from becoming contaminated withundesirable particles. In addition to chromium, other elementssuch as nickel, molybdenum and nitrogen are added to give thesteel special properties. Finally, stainless steel may be polished toa mirror surface to provide unsurpassed cleanability. All Grundfosstainless steel products are available in two grades of stainlesssteel (EN 1.4401 and EN 1.4517 standards).
Built-in energy efficiency
Grundfos is renowned for producing energy-efficient productsand the stainless steel range is no exception. We build energyefficiency into each and every pump. Any of our pumps can befurther optimised if you choose to equip it with one of ouradvanced motors carrying the Grundfos Blueflux label. In actualfact, you can cut energy consumption by as much as 50% whenyou use our innovative technology.
outstanding global service
Team up with Grundfos. We guarantee unsurpassed serviceanywhere in the world. As a truly global company, Grundfosoperates in 56 different countries and has 600 authorisedservice partners worldwide.
Our unique global set-up provides you with benefits, including:
technical assistance to dimension your pumping system
expert know-how and support in your local language
fast spare parts delivery on every continent.
No matter what part of your industrial processyou are seeking to equip with stainless steelpumps, there is a high-quality Grundfos solutionto meet your requirements.
Additional Information:
Payment Terms :
Packaging Details : In Inches:
Max: 500x500x500
Delivery Time : 4 to 14 weeks
Both End Suction Single Stage & Multi Stage pumps are available.
Additional Information:
Payment Terms :
Packaging Details : Available ss per the pump model.
Delivery Time : 4 to 6 Weeks
DDA SMART Digital Series Pumps (0.0007 to 8 gph)
The DDA SMART Digital dosing series represents the latest generation in Digital Dosing pumpsfrom Grundfos. Its impressive intelligence and decision making capabilities go beyond anyexisting metering pump technology in the market.
The DDA can not only inject chemicals and verify injection; it can also measure valuable datasuch as flow or pressure. The pump can then diagnose the operation status based on therelationship between the diaphragm displacement and the pressure inside the head. The pumpis so smart it can tell you if there are air bubbles inside the head. This technology goes evenfurther. Thanks to its impressive logic capabilities, the DDA can make decisions to display and/orcorrect failures such as overpressure, valve leaks or air bubbles
Smooth and Continuous Dosing
Ensures an optimum mixing ratio at the injection point without the need for additional accessories, such as static mixers. It also provides significant reduction of pressure peaks, preventingmechanical stress on wearing parts such as diaphragm, tubing, and connections, resulting in lessmaintenance required.
Full Stroke Length at All Times
The pump always operates at full stroke length, irrespective of the capacity set; this ensures maximum volume displacement per stroke, optimum accuracy, easy priming and improved suction.Up to 3000:1 Turndown Ratio
The Digital Dosing range is designed to give you superior flexibility and accuracy even when dosingvery small volumes.
Maximum Capacity Setting
With the DDA series you decide what the maximum capacity should be. You can select any valuewithin the performance range of each model and the pump will redefine the injection speed andadjust the operation scale within that range. So you only need a few models to cover multiple applications.
Anti-Cavitation / SlowMode
The variable speed of DDA pumps facilitates a unique anti-cavitation function for high viscosityliquids. This function provides slower suction speed (50 or 25% of the maximum speed), ensuringoptimal priming and pumping of even the most difficult liquids.
Flow Monitoring
The DDA FCM pump can precisely measure and display the actual dosing flow. Via the analog 0/4-20 mA output, the actual flow signal can easily be integrated in any process control system, without needing additional measurement equipment.
Pressure Monitoring
The integrated pressure sensor measures the actual pressure of the system, which is shown in thedisplay. In case of an overpressure situation, the pump will stop injecting, generate an alarm on thedisplay, and trigger a relay. The pressure can also be monitored via the 4-20mA signal output.
AutoFlowAdapt
The DDA FCM pump can recognize pressure fluctuations on the discharge line and adapt the speedto compensate the injection, maintaining a constant feeding set point.
Additional Information:
Payment Terms :
Packaging Details : In Inch:
15x15x15
Delivery Time : 4 to 14 weeks
