Vardhman Hoses Pvt Ltd. Gurugram, Haryana

Chemical Designation-Natural Poly Isoprene Good For:- Natural Rubber has many good characteristics. It has high resilience, good compression set, high tear strength, high Abrasion resistant, low crack growth. Bad For:- Natural Rubber is not recommended for oil and solvent resistance. Thickness - 0.5mm to 50mm Width - Up to 1200mm Length - Continuous length Color - Black, Red or in desired color Temp. - -20deg.C to +80deg.C Hardness - Shore A 40 to 85 Tensile Strength - 2Mpa Elongation - 180% Surface can be smooth or fabric impression. Insertion available as per requirement.

Conforming to IS-638/1979 : CM/L - 8361375Application: Used between flanges and similar joints subjected to water, steam & air pressure. Composition: Natural/synthetic/blend rubber is used in manufacturing of sheet rubber jointing and rubber insertion jointing free from surface defects, porosity and grit. Fabric Reinforcement: The reinforcement fabric used for rubber insertion jointing having minimum breaking load of 120N/cm (approx. 12kgf/cm.) for both warp and weft direction. Thicknessin (mm) Tolerance onThickness (mm) No. of Plies 0.8 0.2 1 1.5 0.2 1 3.0 0.3 2 5.0 0.5 2 6.0 0.6 3 8.0 0.7 4

We are an 9001: 2008 certified manufacturer of All kind of Rubber Hoses, Rubber Sheets, Rubber Mats, PVC Braided Hoses, PVC Water Stop Seals i.e. Water Hose, AirPneumaticRock Drill Hose, Fly Ash Hose, SandShot Blast Hose, Chemical Hose, Water Suction Hose, Oil Decanting Hose, Car Washing Hose, Carbon Free Hose, Food Grade Hose, Steam Hose, Rubber Electrical Insulating Mats, Natural Rubber Sheet, Synthetic Rubber Sheet, NeopreneNitrile Rubber Sheet, SandShot Blast Sheet, EPDM Sheets, Para Floating Sheets, Sponge Rubber Sheets, Silicon Sheets, Anti- vibration pads and other rubber molded products.

We manufacture rubber hose for sand shot blasting. As per is: 5894:1980application: for conveying sand, shots or other abrasive materials used in ordnance factory, steel fabrication, shipyards, manufacturing workshops, heavy engineering industries, gas cylinder manufacturing units etc. Construction:lining : uniform seamless tube of naturalsyntheticblend rubber compound of high tensile strength, excellent abrasion resistance and free from air blister, porosity and other defects. reinforcement : plies of rubber impregnated woven textile or braiding of high strength naturalsynthetic fibre. cover : suitable rubber compound of cloth marked finish resistant to abrasion and weather. electric bonding : a strand of copper wire is embedded between the reinforcement plies to provide electrical continuity throughout the length of the hose. Pressures: type 1 - w. P. 0.7 mpa & b. P. 3.5mpa. type 2 - w. P. 1.0 mpa & b. P. 5.0mpa. Nom. Borein (mm) tolerance onnom. Bore (mm) min. Thk. Oflining (mm) min. Thk. Ofcover (mm)20.00 0.75 6.3 1.5025.00 1.25 6.3 1.5031.50 1.25 6.3 1.5038.00 1.50 6.3 1.5045.00 1.50 6.3 1.5050.00 1.50 6.3 1.50w.p. :working pressure, p.p. : proof pressure, b.p. : burst pressure, 1mpa : 10.2kgfcm2 1kgfcm2 :100knm2length : mandrel made hose upto 20 mtr., moulded braided hose in continuos long length.