Post Buy Requirement
VE
Pune, Maharashtra, India
Add Review

Sensors #5553038

Wall Mount PIR Sensors

A NEGAVEEZ PIR Motion Detector offers security and convenience in the areas that they cover. Motion detector is an intelligent device which detects IR Rays emitted by Human Body and controls the ON-OFF operation of electrical loads. The Electrical Loads can be Lights, Fans, Air Conditioning Units for Energy Saving Application or Siren, Buzzer along with Lights for Security Application. When it detects human movement within its detection area, it automatically turns ON the load. The Loads Continue to be ON till the time Human Movement is detected. The Loads are turned OFF after preset time delay if no movement is detected within the set time. It has an additional in built photo sensor (dusk to dawn sensor) which can set the sensor to turn ON artificial light only when the ambient light condition (LUX Level) drops below the set value. This reduces the large amount of energy wastage and helps in making the most energy efficient lightings along with security.

TECHNICAL SPECIFICATIONS:


  • Operating voltage range: 140V AC to 270V AC Overvoltage/Under voltage protection
  • DC 12 V/24 V versions are also available***
  • PIR Sensor: Dual Element Pyro Electric Sensor
  • Time setting: Min 30 sec to Max 30 min to turn OFF loads after the last detected motion. Default time is 30sec.
  • LUX setting: Additional Photo Sensor (Ambient Light Sensor) to select the control on electrical loads during DAY Light, PARTIAL Light and NIGHT condition.
  • Current capacity: 5A/ 1000 W- Resistive load, 200 W of Fluorescent Tubes/LED Light load. For AC Control Use Additional Contactor of Suitable Rating.
  • Sensor warm-up time: 1 Minute
  • Sensing angle: 140 degrees
  • Sensing distance: 10-14 Meters
  • Operating Temperature: -10oC to 50oC
  • Protection class: IP55 Enclosure is protected from environmental conditions that are water and dust.
  • EMI protection: Protection against electromagnetic interference noise caused by cell phones, TV, tuners, audio players.
  • Over Current & Short Circuit Protection by an external replaceable fuse
  • In built Protection circuit for lighting loads
  • Provision for Dry Contact Output Terminal available RELAY- NO/NC/COMMON ***
View Complete Details

False Ceiling / Recessed Mount PIR Occupancy Sensors

A NEGAVEEZ PIR Occupancy Sensor offers security and convenience in the areas that they cover. Occupancy sensor is an intelligent device which detects IR Rays emitted by Human Being and controls the ON-OFF operation of electrical loads. Electrical Loads can be Lights, Fans, AC for Energy Saving Application or Siren, Buzzer, Feedback to Home Automation Controller along with Lights for Security Application. This highly sensitive Sensor Element detects human movement within its detection area and automatically turns the load ON. The Loads are kept ON till the Human Movement persists in the room. The Loads are turned OFF after preset time delay if no movement is detected within the set time It has an additional in built photo sensor (dusk to dawn sensor) which can set the sensor to turn ON artificial light only when the ambient light condition (LUX Level) drops below the set value. This reduces the large amount of energy wastage and helps in making the most energy efficient system along with security.

  • Operating voltage range: 140V AC to 270V AC Overvoltage/Under voltage protection
  • DC 12 V/24 V versions are also available***
  • PIR Sensor: Highly Sensitive Quad Element Pyro Electric Sensor
  • TIME Setting: Built in Re-triggerable Timer setting between 30 sec to 30 minutes from the last movement detection
  • LUX setting: Additional Photo Sensor (Ambient Light Sensor) to select the control of electrical loads during DAY Light, PARTIAL Light and NIGHT condition.
  • Current capacity: 5A/ 1000 W- Resistive load, 200 W of Fluorescent Tubes/LED Light load, For AC Control Use Additional Contactor of Suitable Rating
  • Sensor warm-up time: 1 Minute
  • Sensing angle: 360 degrees
  • Sensing distance: 4-5 Meters
  • Operating Temperature: -10oC to 50oC
  • Protection class: IP25 Enclosure is protected from environmental conditions that are water and dust.
  • EMI protection: Protection against electromagnetic interference noise caused by cell phones, TV, tuners, audio players.
  • Over Current & Short Circuit Protection by an external replaceable fuse
  • In built Protection circuit for lighting loads
  • Provision for Dry Contact Output Terminal available RELAY- NO/NC/COMMON Contact available outside***
View Complete Details

Surface Mount PIR Occupancy Sensors

A NEGAVEEZ PIR occupancy sensor offers security and convenience in the areas that they cover. Occupancy sensor is an intelligent device which detects infrared rays emitted by human being and controls the on-off operation of electrical loads. Electrical loads can be lights, fans, Air conditioning units for energy saving application or siren, buzzer, feedback to home automation controller along with lights for security application. This highly sensitive sensor element detects human movement within its detection area and automatically turns the load on. The loads are kept on till the human movement persists in the room. The loads are turned off after preset time delay if no movement is detected within the set time it has an additional in built photo sensor (dusk to dawn sensor) which can set the sensor to turn on artificial light only when the ambient light condition (lUX level) drops below the set value. This reduces the large amount of energy wastage and helps in making the most energy efficient system along with security.

  • Operating voltage range: 140V AC to 270V AC Overvoltage/Under voltage protection
  • DC 12 V/24 V versions are also available***
  • PIR Sensor: Highly Sensitive Quad Element Pyro Electric Sensor
  • Time setting: Min 30 sec to Max 30 min to turn OFF loads after the last detected motion. Default time is 30sec.
  • LUX setting: Additional Photo Sensor (Ambient Light Sensor) to select the control on electrical loads during DAY Light, PARTIAL Light and NIGHT condition.
  • Current capacity: 5A/ 1000 W- Resistive load, 200 W of Fluorescent Tubes/LED Light load. For AC Control Use Additional Contactor of Suitable Rating.
  • Sensor warm-up time: 1 Minute
  • Sensing angle: 360 degrees
  • Sensing distance: 4-5 Meters
  • Operating Temperature : -10oC to 50oC
  • Protection class: IP25 Enclosure is protected from environmental conditions that are water and dust.
  • EMI protection: Protection against electromagnetic interference noise caused by cell phones, TV, tuners, audio players.
  • Over Current/ Short Circuit Protection- 6.3Amps
  • In built Protection circuit for lighting loads
View Complete Details

PIR Sensor In NANO Series

A NEGAVEEZ PIR Motion Detector offers security and convenience in the areas that they cover. Motion detector is an intelligent device which detects IR Rays emitted by Human Body and controls the ON-OFF operation of electrical loads. The Electrical Loads can be Lights, Fans, Air Conditioning Units for Energy Saving Application or Siren, Buzzer along with Lights for Security Application. When it detects human movement within its detection area, it automatically turns ON the load. The Loads Continue to be ON till the time Human Movement is detected. The Loads are turned OFF after preset time delay if no movement is detected within the set time. It has an additional in built photo sensor (dusk to dawn sensor) which can set the sensor to turn ON artificial light only when the ambient light condition (LUX Level) drops below the set value. This reduces the large amount of energy wastage and helps in making the most energy efficient lightings along with security.
  • Operating voltage range: 140V AC to 270V AC Overvoltage/Under voltage protection.
  • DC 12 V/24 V versions are also available***
  • PIR Sensor: Dual Element Pyro Electric Sensor
  • Time setting: 30 sec to 6min to turn OFF loads after the last detected motion
  • LUX setting: Additional Photo Sensor (Ambient Light Sensor) to select the control on electrical loads during DAY Light, PARTIAL Light and NIGHT condition.
  • Current capacity: 5A/ 1000 W- Resistive load, 200 W of Fluorescent Tubes/LED Light load. For AC Control Use Additional Contactor of Suitable Rating.
  • Mounting Height: 1.5 Meters to 2.5 Meters
  • Sensor warm-up time: Less than 1 Min
  • Operating Temperature : -10oC to 50oC
  • Protection class: IP45 Enclosure is protected from environmental conditions of water and dust ingression.
  • Miniature Size which can be work unnoticed to gel with the aesthetic beauty of the space
  • Protection Against Over Voltage & Under Voltage Conditions
  • Water Ingress Protection
View Complete Details

DUSK TO DAWN SENSOR For Outdoor Lighting Control

ANEGAVEEZASTRO CLOCK offers energy saving and convenience for Outdoor Lighting Management by Switching ON-OFF Light Load based on astrological calculation of theSunset & Sunrisetiming of the location which are never the same throughout the year. So no other dusk to dawn switch can give an exact switching of lights than an ASTROLOGICAL CLOCK. This real time intelligent device comes in 3 models with output channel to configure single phase load/ three phase load with TIME Settings. This reduces the large amount of energy wastage and helps in making the most energy efficient lightings.

View Complete Details

PIR SECURE SENSOR

Sensor For Outdoor Security turns out more crucial in terms of their performance in extreme temperature conditions and possibility of fooling them by the intruder. A NEGAVEEZ SECURE offers security and convenience in the areas that they cover. Motion sensor is an intelligent device which detects IR Rays emitted by Human Body and controls the ON-OFF operation of electrical loads. When it detects movement inside its detection area, it automatically turns ON the Load (Siren or Security System). Tamper Switch is provided to give an alarm if someone tries to tamper the unit. Additionally, if someone tries to cover the unit with any object so that human movement should not be detected, additional PROXIMITY SENSOR alarm output is provided. Proximity Sensor Detects any object in the vicinity of 100mm with an in built intelligence that if an object is consistently in front of sensor for more than 30 sec, then only output alarm is generated. Thus NEGAVEEZ SECURE Offer you a Valid, FOOL-PROOF Intrusion Signal which can be used with Siren or any Higher End Automation System for SECURITY.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

Retailer of Sensors from Pune, Maharashtra by VARAD ELECTRO SYSTEMS
Post Buy Requirement
VE

VARAD ELECTRO SYSTEMS Pune, Maharashtra

Pune, Maharashtra, India
Add Review

Our Products

  1. Sensors 6 Products available
  2. Fire Alarm System

    1 Products available
  3. Safety Lights

    1 Products available
  4. IT Solutions

    1 Products available
  5. Electronic Detectors

    1 Products available

Sensors #5553038

Our Complete range of products are Wall Mount PIR Sensors, False Ceiling / Recessed Mount PIR Occupancy Sensors, Surface Mount PIR Occupancy Sensors, PIR Sensor in NANO Series and DUSK TO DAWN SENSOR for outdoor lighting control.

Wall Mount PIR Sensors

A NEGAVEEZ PIR Motion Detector offers security and convenience in the areas that they cover. Motion detector is an intelligent device which detects IR Rays emitted by Human Body and controls the ON-OFF operation of electrical loads. The Electrical Loads can be Lights, Fans, Air Conditioning Units for Energy Saving Application or Siren, Buzzer along with Lights for Security Application. When it detects human movement within its detection area, it automatically turns ON the load. The Loads Continue to be ON till the time Human Movement is detected. The Loads are turned OFF after preset time delay if no movement is detected within the set time. It has an additional in built photo sensor (dusk to dawn sensor) which can set the sensor to turn ON artificial light only when the ambient light condition (LUX Level) drops below the set value. This reduces the large amount of energy wastage and helps in making the most energy efficient lightings along with security.

TECHNICAL SPECIFICATIONS:


  • Operating voltage range: 140V AC to 270V AC Overvoltage/Under voltage protection
  • DC 12 V/24 V versions are also available***
  • PIR Sensor: Dual Element Pyro Electric Sensor
  • Time setting: Min 30 sec to Max 30 min to turn OFF loads after the last detected motion. Default time is 30sec.
  • LUX setting: Additional Photo Sensor (Ambient Light Sensor) to select the control on electrical loads during DAY Light, PARTIAL Light and NIGHT condition.
  • Current capacity: 5A/ 1000 W- Resistive load, 200 W of Fluorescent Tubes/LED Light load. For AC Control Use Additional Contactor of Suitable Rating.
  • Sensor warm-up time: 1 Minute
  • Sensing angle: 140 degrees
  • Sensing distance: 10-14 Meters
  • Operating Temperature: -10oC to 50oC
  • Protection class: IP55 Enclosure is protected from environmental conditions that are water and dust.
  • EMI protection: Protection against electromagnetic interference noise caused by cell phones, TV, tuners, audio players.
  • Over Current & Short Circuit Protection by an external replaceable fuse
  • In built Protection circuit for lighting loads
  • Provision for Dry Contact Output Terminal available RELAY- NO/NC/COMMON ***
View Complete Details

False Ceiling / Recessed Mount PIR Occupancy Sensors

A NEGAVEEZ PIR Occupancy Sensor offers security and convenience in the areas that they cover. Occupancy sensor is an intelligent device which detects IR Rays emitted by Human Being and controls the ON-OFF operation of electrical loads. Electrical Loads can be Lights, Fans, AC for Energy Saving Application or Siren, Buzzer, Feedback to Home Automation Controller along with Lights for Security Application. This highly sensitive Sensor Element detects human movement within its detection area and automatically turns the load ON. The Loads are kept ON till the Human Movement persists in the room. The Loads are turned OFF after preset time delay if no movement is detected within the set time It has an additional in built photo sensor (dusk to dawn sensor) which can set the sensor to turn ON artificial light only when the ambient light condition (LUX Level) drops below the set value. This reduces the large amount of energy wastage and helps in making the most energy efficient system along with security.

  • Operating voltage range: 140V AC to 270V AC Overvoltage/Under voltage protection
  • DC 12 V/24 V versions are also available***
  • PIR Sensor: Highly Sensitive Quad Element Pyro Electric Sensor
  • TIME Setting: Built in Re-triggerable Timer setting between 30 sec to 30 minutes from the last movement detection
  • LUX setting: Additional Photo Sensor (Ambient Light Sensor) to select the control of electrical loads during DAY Light, PARTIAL Light and NIGHT condition.
  • Current capacity: 5A/ 1000 W- Resistive load, 200 W of Fluorescent Tubes/LED Light load, For AC Control Use Additional Contactor of Suitable Rating
  • Sensor warm-up time: 1 Minute
  • Sensing angle: 360 degrees
  • Sensing distance: 4-5 Meters
  • Operating Temperature: -10oC to 50oC
  • Protection class: IP25 Enclosure is protected from environmental conditions that are water and dust.
  • EMI protection: Protection against electromagnetic interference noise caused by cell phones, TV, tuners, audio players.
  • Over Current & Short Circuit Protection by an external replaceable fuse
  • In built Protection circuit for lighting loads
  • Provision for Dry Contact Output Terminal available RELAY- NO/NC/COMMON Contact available outside***
View Complete Details

Surface Mount PIR Occupancy Sensors

A NEGAVEEZ PIR occupancy sensor offers security and convenience in the areas that they cover. Occupancy sensor is an intelligent device which detects infrared rays emitted by human being and controls the on-off operation of electrical loads. Electrical loads can be lights, fans, Air conditioning units for energy saving application or siren, buzzer, feedback to home automation controller along with lights for security application. This highly sensitive sensor element detects human movement within its detection area and automatically turns the load on. The loads are kept on till the human movement persists in the room. The loads are turned off after preset time delay if no movement is detected within the set time it has an additional in built photo sensor (dusk to dawn sensor) which can set the sensor to turn on artificial light only when the ambient light condition (lUX level) drops below the set value. This reduces the large amount of energy wastage and helps in making the most energy efficient system along with security.

  • Operating voltage range: 140V AC to 270V AC Overvoltage/Under voltage protection
  • DC 12 V/24 V versions are also available***
  • PIR Sensor: Highly Sensitive Quad Element Pyro Electric Sensor
  • Time setting: Min 30 sec to Max 30 min to turn OFF loads after the last detected motion. Default time is 30sec.
  • LUX setting: Additional Photo Sensor (Ambient Light Sensor) to select the control on electrical loads during DAY Light, PARTIAL Light and NIGHT condition.
  • Current capacity: 5A/ 1000 W- Resistive load, 200 W of Fluorescent Tubes/LED Light load. For AC Control Use Additional Contactor of Suitable Rating.
  • Sensor warm-up time: 1 Minute
  • Sensing angle: 360 degrees
  • Sensing distance: 4-5 Meters
  • Operating Temperature : -10oC to 50oC
  • Protection class: IP25 Enclosure is protected from environmental conditions that are water and dust.
  • EMI protection: Protection against electromagnetic interference noise caused by cell phones, TV, tuners, audio players.
  • Over Current/ Short Circuit Protection- 6.3Amps
  • In built Protection circuit for lighting loads
View Complete Details

PIR Sensor In NANO Series

A NEGAVEEZ PIR Motion Detector offers security and convenience in the areas that they cover. Motion detector is an intelligent device which detects IR Rays emitted by Human Body and controls the ON-OFF operation of electrical loads. The Electrical Loads can be Lights, Fans, Air Conditioning Units for Energy Saving Application or Siren, Buzzer along with Lights for Security Application. When it detects human movement within its detection area, it automatically turns ON the load. The Loads Continue to be ON till the time Human Movement is detected. The Loads are turned OFF after preset time delay if no movement is detected within the set time. It has an additional in built photo sensor (dusk to dawn sensor) which can set the sensor to turn ON artificial light only when the ambient light condition (LUX Level) drops below the set value. This reduces the large amount of energy wastage and helps in making the most energy efficient lightings along with security.
  • Operating voltage range: 140V AC to 270V AC Overvoltage/Under voltage protection.
  • DC 12 V/24 V versions are also available***
  • PIR Sensor: Dual Element Pyro Electric Sensor
  • Time setting: 30 sec to 6min to turn OFF loads after the last detected motion
  • LUX setting: Additional Photo Sensor (Ambient Light Sensor) to select the control on electrical loads during DAY Light, PARTIAL Light and NIGHT condition.
  • Current capacity: 5A/ 1000 W- Resistive load, 200 W of Fluorescent Tubes/LED Light load. For AC Control Use Additional Contactor of Suitable Rating.
  • Mounting Height: 1.5 Meters to 2.5 Meters
  • Sensor warm-up time: Less than 1 Min
  • Operating Temperature : -10oC to 50oC
  • Protection class: IP45 Enclosure is protected from environmental conditions of water and dust ingression.
  • Miniature Size which can be work unnoticed to gel with the aesthetic beauty of the space
  • Protection Against Over Voltage & Under Voltage Conditions
  • Water Ingress Protection
View Complete Details

DUSK TO DAWN SENSOR For Outdoor Lighting Control

ANEGAVEEZASTRO CLOCK offers energy saving and convenience for Outdoor Lighting Management by Switching ON-OFF Light Load based on astrological calculation of theSunset & Sunrisetiming of the location which are never the same throughout the year. So no other dusk to dawn switch can give an exact switching of lights than an ASTROLOGICAL CLOCK. This real time intelligent device comes in 3 models with output channel to configure single phase load/ three phase load with TIME Settings. This reduces the large amount of energy wastage and helps in making the most energy efficient lightings.

View Complete Details

PIR SECURE SENSOR

Sensor For Outdoor Security turns out more crucial in terms of their performance in extreme temperature conditions and possibility of fooling them by the intruder. A NEGAVEEZ SECURE offers security and convenience in the areas that they cover. Motion sensor is an intelligent device which detects IR Rays emitted by Human Body and controls the ON-OFF operation of electrical loads. When it detects movement inside its detection area, it automatically turns ON the Load (Siren or Security System). Tamper Switch is provided to give an alarm if someone tries to tamper the unit. Additionally, if someone tries to cover the unit with any object so that human movement should not be detected, additional PROXIMITY SENSOR alarm output is provided. Proximity Sensor Detects any object in the vicinity of 100mm with an in built intelligence that if an object is consistently in front of sensor for more than 30 sec, then only output alarm is generated. Thus NEGAVEEZ SECURE Offer you a Valid, FOOL-PROOF Intrusion Signal which can be used with Siren or any Higher End Automation System for SECURITY.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us