Vantage Telecommunications

Wanowrie, Pune, Maharashtra

Parameters conductor Size (mm)0.4 0.5 0.63 0.9conductor Resistance (per Km in Ohms.) individual 135 8 86 6 58 4 28 2conductor Resistance Unbalance (%)individual 3 2.5 2 2 average 1.5 1 1 1 conductor Elongation (minimum %)15 15 18 18attenuation At 150 Khz (db/km) Shall Not Exceed 12 8.25 6.3 4.4insulation Solid (mdpe/hdpe)spark Test3 Kv Rms Ac, 1 Spark per 5 K.m.retraction of Insulation (shall Not Exceed) 2.5 Mm After 1 Minresistance to Compression 200 N, 12 V Dcinsulation Resistance At 500v5000 Mega Ohm Kmconstruction10/20 Pair Units & 50/100 Pair Super Units of Sizes: 10 Pair to 2400 Pairsfilling Compoundwater Resistant Compound (petro Jelly)core polyester Tapemoisture Barrier Poly Aluminiumsheath / Jacket Ldpearmouring Galvanised Steel Tapearmouring Bedding Pe Tapemutual Capacitance (nf/km)individual 52 4.5 average 52 3capacitance Unbalance (pf/km)individual 3000 Pf average 750 Pffar End Cross Talk (db) At 150 Khz, Better Than 67.8 Rms Indvl. 55 Rmsnear End Cross Talk (db) At 150 Khzbetter Than 55 Rms (individual Value)pairsfrom 5 Pairs to 2400 Pairs.

Type of the Cable : Duct, Direct Burial, Aerialnumber of Fibre2 - 144 Fibre Countfibre Typeitu-t G 652, G 652 C, G 652 D, G 653, G 654, G 655loose Tube Materialpbtp, Nylonwater Resistance Thixotropic Jellystrength Membersfrp, Aramid Yarn, Glass Fibre Reinforcements, Steel Wiremoisture Barrierwater Swellable Tape, Flooding Jellyarmouring Material copolymer Coated S. S. Tape, Copolymer Coated Eccs Tapesheath / Jacket Compoundhdpe (anti-termite or Normal), Polyamide-12temperature of Operation ( C) 40 to + 70.

Copper: Annealed Electrolytic Plain / Tinned Copper Conductor with Various Diameter of 0.4mm to 0.9 Mm as per Iec28 and Astm B3.insulation: Conductor Insulation are Solid Hdpe / Pvc Insulation.cable Core: Two Insulated Conductors are Twisted Together to Form a Pair with Uniform Specific Lay Length .cable is Assembled By Stranding of 10 Pairs / 20pairs or 25 Pairs Basic Subunit.core Wrapping: a Non Hygroscopic and Dielectric Polyester Film is Applied Helically Over the Cable Core.sheath: Pvc / Frls Pvc / Pe Sheath in Grey / White / Green / Black Colour is Extruded Over the Cable Core.

Copper: Annealed Electrolytic Copper Conductor with Various Diameter of 0.4 Mm to 0.9 Mm as per Iec28 and Astm B3.insulation: Conductor Insulation are Solid Hdpe / Foam Skin / Cellular Insulation as per Astm D 1248 and Bs 6234.cable Core: Two Insulated Conductors are Twisted Together to Form a Pair with Uniform Specific Lay Length . Cable is Assembled By Stranding of 10 Pairs / 20 Pairs or 25 Pairs Basic Subunit. core Wrapping: a Non Hygroscopic and Dielectric Polyester Film is Applied Helically Over the Cable Core.moisture Barrier/screen: An Aluminum Foil Coated with Co-polymer On Both Sides or One Side is Applied Longitudinally Over the Cable Core.suspension Strand: 7 Wire Suspension Strand is Made Integral Part of the Cable and a Common Sheath is Provided Over Cable Core and Suspension Strand.sheath: Black Polyethylene Sheath is Extruded Over the Screen.jelly Filled Cable Option also Available.

Copper: Annealed electrolytic copper conductor with diameter of 0.4mm & 0.5 mm as per IEC28 and ASTM B3.Insulation: Conductor insulation is Solid HDPE insulation.Cable Core: Two insulated conductors are twisted together to form a pair with uniform specific lay length .Cable is assembled by stranding of 5 Pairs, 10 pairs & 20pairs basic subunit. Core wrapping: A non hygroscopic and dielectric polyester film is applied helically over the cable core.Sheath: PVC / FRLS PVC / PE Sheath is extruded over the cable core.Option of Water Blocking tape in place of Polyester & Yarns is also available.Option of Aerial Fig-8, CAT - 3 cable upto 100 Pairs for Aerial applications is also available.

Copper: Annealed Electrolytic Copper Conductor with Various Diameter Ranging from 0.4 Mm to 0.9 Mm as per Iec28 and Astm B3.insulation: Conductor Insulation are Foam Skin / Cellular / Solid Hdpe Insulation as per Astm D 1248 and Bs 6234.cable Core: Two Insulated Conductors are Twisted Together to Form a Pair with Uniform Specific Lay Length. Cable is Assembled By Stranding of 10 Pairs or 20 Pairs or 25 Pairs Basic Subunit. filling Compound: a Moisture Resistant Filling Compound is Applied to Completely Coat the Insulated Conductors and Fill the Interstices Between Pairs and Units, to Avoid the Seepage of Water from Inside the Cables.core Wrapping: a Non Hygroscopic and Dielectric Polyester Film is Applied Helically Over the Cable Core.moisture Barrier/screen: An Aluminum Foil Coated with Co-polymer On Both Sides or One Side is Applied Longitudinally Over the Cable Core.sheath: Black Polyethylene Sheath is Extruded Over the Screen. specifications: Iec 60794 for Mechanical & Environmental Testing.

Construction Details: Multiloose Tube Cables ( 2f - 96f)number of Elements (2f to 72f)6 Nos( 96f )8 Nostube/fibre Identification : Colour Codedcentral Strength Member : Fibre Reinforced Plastic (frp)fibre Protection (tubes)polybutylene Terephthalate (pbt)fillers as Requiredwater Blocking Thixotropic Gel (tubes) / Jelly (interstices)core Wrapping Polyester Tapeperipheral Strength Members : Aramid Yarnssheath pvc / Pe / Lszh* Option Available for Jelly Filled Cablesconstruction Details: Unitube Cables (2f -24f)number of Fibres per Tube 24 Nos.fibre Identification : Colour Codedstrength Member frp / Arp Rod / Steel Wire Embedded in Sheathfibre Protection (tubes)polybutylene Terephthalate (pbt)fillers as Requiredwater Blockingthixotropic Gel (tubes) / Tapesheath pvc / Polyethylene / Lszh* Option Available for Jelly Filled Cables / Flat Cablesspecifications : Iec 60794 for Mechanical & Environmental Testing.

Construction Details: Multiloose Tube Cables (2f -144f)number of Elements (2f to 72f) 6 Nos(144f ) 8 Nostube/fibre Identification : Colour Codedcentral Strength Member : Fibre Reinforced Plastic (frp)fibre Protection (tubes : Polybutylene Terephthalate (pbt)fillers as Required Water Blocking. Thixotropic Gel (tubes) / Jelly (interstices)core Wrapping Polyester Tapearmourcorrugated Steel Tape Armoured Cables* Option Available for Unarmoured Cables with or Without Pa-12 Jacket** Option of Ribbon Cables Available for High Fibre Countconstruction Details: Unitube Cables ( 2f -24f)number of Fibres per Tube : 24 Nosfibre Identification Colour Codedstrength Member Frp Rod / Steel Wire Embedded in Sheathfibre Protection (tubes) Polybutylene Terephthalate (pbt)water Blocking Thixotropic Gel (tubes) / Water Swellable Tapesheath Polyethylene* Option Available for Unarmoured Cables with Pa-12 Jacket and Corrugated Steel Tape Armoured Cables.specifications : Iec 60794 for Mechanical & Environmental Testing.

We are Offering Aerial Optical Fibre Cables.construction Details: Multiloose Tube Cables (2f - 96f)number of Elements (2f to 72f) 6 Nos( 96f ) 8 Nostube/fibre Identification Colour Codedcentral Strength Member Fibre Reinforced Plastic (frp)fibre Protection (tubes) Polybutylene Terephthalate (pbt)fillersas Requiredwater Blocking Thixotropic Gel (tubes) / Jelly (interstices)core Wrapping Polyester Tapesheath Polyethyleneperipheral Strength Memberaramid Yarns* Option Available for Unitube Adss Cablesconstruction Details: Multiloose Tube Cables ( 2f - 96f)number of Elements (2f to 72f) 6 Nos( 96f ) 8 Nostube/fibre Identification Colour Codedcentral Strength Member Fibre Reinforced Plastic (frp)fibre Protection (tubes) Polybutylene Terephthalate (pbt)fillers as Requiredwater Blocking thixotropic Gel (tubes) / Jelly (interstices)core Wrapping Polyester Tapesheath Polyethylenesuspension Strand 7 Wire Galvanized Steel Strand* Option Available for Unitube Fig-8 Aerial Cables specifications : Iec 60794 for Mechanical & Environmental Testing.