Our Products
Industrial Valves
2 Products availableTransmitter Device
2 Products availableValves & Valve Fittings
1 Products availableIndustrial & Engineering Products
1 Products availableBoiler And Boiler Parts
1 Products availableHydraulic And Pneumatic Machines
1 Products availableOur Complete range of products are TWO Way Full Port Ball Valve, Pressure Transmitters Isp, On Line Conductivity Brix Reference Measurement, Is Limit Switch Box and Hydro Static Pressure Transmitter.
The V-Notch Ball Valve gives non-clogging, high capacity, straight through flow control of fluids containing pulp and paper stock or slurries and fluids containing suspended solids or fibrous materials.
The V- Notch Ball Valves are offered squared and clamped driven shaft plus ball shall with splined connection designed for zero lost motion for highly accurate positioning and precise control.
Specification | |
---|---|
Design | BS. 5351 |
Size | 25 to 200 mm (1" to 8") |
Rating | ANSI 150 |
End Connection | Flanged End |
F/F Dimensions | ANSI B-16.10 |
Flow Characteristics | Approx. Equal Percentage, Linear, On-Off. |
Flow Direction | Forward (into convex face of V-ball) |
Max. Ball Rotation | 900 |
Body Material | Carbon Steel, Stainless Steel, and Alloy Steel etc. |
Ball Material | CF8M Chrome plated/Alloy steels. |
Seat Ring | PTFE, Carbon Filled Teflon. |
Ball Ring | CF8M, Alloy steels. |
Gasket | PTFE, Graphite Laminate. |
Gland Packing | PTFE V Rings, Grafoil. |
Actuator Form | Diaphragm. Rotary, Cylinder, Electric |
Actuator Type | Scotch |
Diaphragm | Nitrile / Neoprene. |
Spring Range | 3- 15 Psig ( 0.2 - 1.0 Kg/cm2) 6 - 30 Psig ( 0.4 - 2.0 Kg/cm2) |
Air Supply | 20 - 35 Psig, (1.4 -2.5 Kg/cm2) |
Air Connection | 1/ 4" or 1/ 2" NPT |
Accessories Optional | Valve Positioner - Pneumatic, Electro Pneumatic, Airsel, Solenoid Valve, Air Lock, Volume Booster, I/P Converter, Position Transmitter, Limit - Proximity Switches etc. Top or Side Mounted Handwheel |
Butterfly Valve design is the most common type of rotary valve and provides low weight to Cv Ratio combined with simplicity of design and comparatively low cost. It is simple device to control or block the flow, a single vane Or wafer disc pivots in the valve body and find wide application for throttling or two position control in the chemical, paper & pulp, sugar Industries, cooling water circulation, water treatment plants, compressed air, gas plant, flue gas desulphurization plants etc.
Butterfly Valves have been around industry for decades, performing well defined tasks and are Economic alternative to Gate valve, Ball valve, Plug valve etc.
Specification | |
---|---|
Design | Wafer |
Size | 50 to900 mm (2" to 36") |
Rating | 150 ANSI |
Flow Characteristic | Throttling, On-Off. |
Material | Body : Cast Iron, Carbon Steel, Stainless Steel etc.
Vane : Stainless Steel Body Sleeve : Neoprene, Nitrile, Teflon, EPDM, Silicon, Butyl, Viton etc. Soft Seat : Teflon Gland Packing : PTFE V Rings upto 1800 C Grafoil upto 4000 C. |
Actuator Type | Diaphragm,. Rotary, Piston, Electric |
Diaphragm | Nitrile / Neoprene |
Spring Range | 3- 15 Psig ( 0.2 - 1.0 Kg/Cm2 ) 6 - 30 Psig ( 0.4 - 2.0 Kg/Cm2) |
Air Supply | 20 - .35 Psig (1.4 - 2.5 Kg/Cm2) |
Air Connection | 1/4" or 1/ 2" NPT |
Accessories Optional | Valve Positioner - Pneumatic, Electro Pneumatic, Airset, Solenoid Valve, Air Lock, Volume Booster, I/P Converter, Position Transmitter, Limit - Proximity Switches etc. Top or Side Mounted Handwheel |
I&S produces 2-Piece Ball Valves available with ISO mounting pad & provided with mounting bracket, couplers for fitting Pneumatic Piston Cylinder with rack & Pinnion actuator & Diaphragm actuator. The valves are available with Pneumatic Rotary Actuators, either Double Acting or Spring Return type.
These Pneumatic Operated Ball Valves are also available with various further options. The Ball Valves are designed with mounting dimensions as per ISO 5211. Flanged end valves and face to face dimensions are as per ANSI B16.5 Class 150 (Short Body).
Specification | |
---|---|
Sizes | 15MM (1/2”) to 200mm (8”). |
Body and End Piece | Investment Casted Cast Steel ASTM A216 WCB or Stainless Steel ASTM A351CF8(SS304) or CF8M (SS316). |
Ball | Stainless Steel AISI 31 6 |
Design | As per API 607 Std. Fire Safe (but not tested.) |
Stem and stem nut | Stainless Steel AISI 316 |
Ball seat | Reinforced PTFE |
Stem seals | Reinforced PTFE |
Body gasket | PTFE |
Antistatic device | Stainless Steel SS316 |
Pressuretemperature rating | As per BS 5351 Class 300 |
Body pressure rating | ANSI B16.5 Class 150/300 |
End connection | Flanged to ANSI B16.5 Class 150 / 300 |
Leakage Class | As per ANSI B16.104 1976:Teflon seating Class VI. |
Characteristics | On-Off |
Manual operation (Optional) | Provision for manual Handlever. |
Accessories |
Local position indicator, Rotary Limit switch box, Air Lock Relay Solenoid Valve. |
Sales point |
Highly reliable, long life, simple construction and maintenance free Ball Valve. |
Application |
For air, water, oil, gas, corrosive Chemicals, Combustion equipment, Power Station, Hydro-Electric, Nuclear Power Generation, Chemicals & Petrochemicals Industries. |
Knife Edge Gate Valve is one of the specific designs among other Industrial Valves. This design ensures minimum contact between the parts of the valve, Reduces the Wear & Tear. The high performance Knife Edge Gate Valve feature. Non Sliding Motion, Avoid Sliding Contact between Body & Gate allow flushing of media form the valve interior. Batten edge of the Gate (Knife-Edge) allows the tight shut off even when solid particles settles at the bottom of the Body.
A wide variety of hardened. trim options are available on Gate. Seat and Wear Ring. Knife Gate Valve are Generally, Unidirectional Valves, Excellent Hopper Isolation valve with their ability to cut through flowing media and closed by dislodging any material in the seating area. Knife-Edge Gate Valves. withstand high Temperature Abrasive Slurries in Mining, Steel, Power, Chemical, and Paper industries ideal for hign-density Slurry Lines.
Specification | |
---|---|
Type | Uni-directional / Bi.-directional Knife Edge Gate Valve |
Moc |
Cast Iron / Cast Steel / SS 303 / 316 / 304L./ 316L. Body: Cast Corrosion resistant steel or cast iron to provide receptivity against. corrosion For all wetted parts. Gate: The Stainless steel knife gate plate is precision-buffed on both sides, to enhance Packing life ard ensure positive shut off even heavy or high-viscous fluid. Stem: Stainless steel or as desire, having double start thread rising/ non-rising spindle, For fast closing and opening. Seat: Renewable Metal-to-Metal, replaceable type, soft seat and other Suitable to application. In addition to standard Stainless steel seat ring, rubber ring and Teflon seat rings are Available as options. Gland Packing Multi layer gland packing in a variety of materials to suit condition. |
Port | Round Port, “V” Notch |
End Connection |
Flanged End / full Lunged, Wafer Flangeless., Two Lug, Wafer Flangeless, Flange Type, Wafer |
Sizes | 50 mm TO 800 mm (higher size on application) |
Rating |
10 bar up to 600mm for valves. with body in C.S. S.S. and specially alloy, 10 bar Up to 300mm 5 bar on higher sizes up to 600mm with body in Cast iron / Ductile iron. |
Drilling |
Option Include ANSI. DIN, BS, JIS and AS standard; others on request |
Operation Available |
Knife edge Gate Valves Operation - Manual, Cylinder Operated. Electrical Actuator, Pneumatic Actuator with Manual override. |
Actuator |
Hand Wheel, Chen wheel, Bevel Gear and wheel or chain wheel, Pneumatic Double Acting cylinder and electric actuator. |
The I&S variable spray nozzles de-super heater unit can be used in many application to efficiently reduce the superheated steam or other vapors to temperature approaching saturation. The superheated vapour is passed through a section of pipe into which is fitted a spray nozzle that produces dispersed droplets from a supply of pressurized condensate.
These finely atomized particales promote immediate evaporation. The required heat being absorbed from superheated vapour thus reducing the temperature.
Specification | |
---|---|
Design | AS ME B16-34 |
Valve Size | 2" (50mm) |
Rating | 150 to 1500 ANSI. |
Material | Body : ASME A216 Gr.. WCB ( <4250 C ) ASME A217 Gr. WC6/ 9 (<55O0 C ) Body Tube : Stainless Steel Guide /Seat : Stellited 6 Plug/Stem : Steliitedi 6/316L Sealing Rings : Carbon Atomisers : 316 Stainless Steel ( CF8m ) Packing : Grafoll |
Actuator | Pneumatic Diaphragm as Standard |
Diaphragm | Nitrite / Neoprene |
Spring Range | 3- 15 PSIG ( 0.2 - 1.0 Kg/cm2 ) 6 - 30 PSIG (0.4 - 2.0 Kg/cm2) |
Air Supply | 20 - 35 PSIG (1.4 - 2.5 Kg/ cm2 j |
Air Connection | 1/ 4" or 1/ 2" NPT |
Accessories | Valve Positioner - Pneumatic , Electro Pneumatic, |
Optional | Smart Positioner, Airset, Solenoid Valve, Air Lock, Volume Booster, I/P Converter, Position Transmitter, Limit - Proximity Switches etc, Top or Side Mounted Handwheel |
Armed with the design ideas of block structure and Multi-port type, we produced the IS-EP 1000 series E-P valve positioner which has two types, one is Linear and another is rotary. The Linear one is used for linear operation of pneumatic linear valve actuator. The rotary one is used for rotary pneumatic actuator. They control valve stroke accurately, through pressure air, according to input signal of 4-20mA being input from electrical controller control system.
In addition, the internal position transmitter and/or limit switches are easily to be assembled inside of the positioner in order to senses mechanical position change of stem being on the valve or similar device and converses to current signal of DC 4-20mA outputs for computers or Industry Processing Control System. It is flame proof type attached internally.
The sensors ISP-200 are piezo-resi stive pressure sensors based on ceramic. The measuring bridge is printed directly on one side of the ceramic diaphragm by means of thick film technology. Because of the excellent chemical resistance no additional protection is normally required.
The sensors are designed in such a way so that temperature changes and overloading do not cause any loss in reliability. The use of ceramic ensures high linearity across the entire range of measurement and reduces effects of hysteresis to a minimum. The sensors are thermal compensated by laser adjustable PTC resistors.
Specification | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Range | 0-1 Bar to 0-400 Bar | |||||||||
Material |
|
|||||||||
Signal/Supply | 4-20mA 2-Wire/8-32VDC | |||||||||
Accuracy | 0.5% of Span | |||||||||
Repeatability | 0.5% of Span | |||||||||
Permissible temperature | 200C to +850C | |||||||||
Zero & Span Adjustable |
ISTT-SMART Universal Temperature Transmitter with HART-protocol for converting various input signals in to a scalable 4 to 20 mA analogue output signal
Instruments & Systems manufacturers online conductivity based BRIX reference measurement system. This system measures and control conductivity based online BRIX reference in BATCH/CONTINUOUS vacuum PANS.
Instruments & system has done around 1000 successful installations so far in various sugar factories in INDIA and rest of the world.
Specification | |
---|---|
Display | 3 Digit 1” Seven segment LED Display of BRIX Reference |
Input | Conductivity Electrode |
Output | 4-20mA |
Power Supply | 230 VAC at 50Hz. (Can be customized as per user requirement) |
Electronic Timer Output | 24VDC/230VAC for Electrode Solenoid Valve |
Enclosure | Sheet metal powder coated Weather proof field mountable. |
Insulation | PTFE |
Actuator Type | Pneumatic Piston Actuator |
Air Supply | 0 5Kg/cm2 Max |
Inbuilt Cleaning | Inbuilt Cleaning chamber for Washing of electrode |
IS-LS series limit switch boxes were designed through advance and state-of-the-art engineering technology which have the product to be solid, beautiful and with high-level quality. The all range of the products fully meets IP specifications and the bracket is designed in light of ISO5211 and NAMUR standard.
There are mini type, big type and explosion proof type which include mechanical switches, proximity sensor and magnetic sensor in the range of ALS series products which cover all kind limit switch boxes.
ISP - SMART The sensors ISP - SMART are piezoresistive pressure sensors . These Pressure Sensors posses a flush diaphragm facing the pressure media Able to measure the pressures of viscous liquids.
The diaphragm forms a chamber in which oil is filled to isolate sensing element from transfer pressure. The isolation helps measure the pressures of corrosive fluids and electro - conductive fluids
ISP HP The sensors ISP HP are piezoresistive pressure sensors . These Pressure Sensorsposses a flush diaphragm facing the pressure media Able to measure the pressures of viscous liquids.
The diaphragm forms a chamber in which oil is filled to isolate sensing element from transfer pressure. The isolation he lps measure the pressures of corrosive fluids and electro conductive fluids.
Specification | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Range | 0-1 Bar to 0-400 Bar | ||||||||||||
Material |
|
||||||||||||
Signal | 4-20mA with superimposed communication signal for HART Protocol | ||||||||||||
Accuracy |
|
||||||||||||
Long Term Stability | 0.05%/Year | ||||||||||||
Display | 5 Digit 52 Bars Meter | ||||||||||||
Display Range | 19999 - 99999 |
I&S Linear Power Cylinders are widely used for accurately and positively. Positioning all types of plant regulators such as Dampers, ID and FD. Fans in Boilers, Throttle Valves and Butterfly Valves. These cylinder can be arranged so that increase or decrease in control pressure moves the position either outwards or inward.
Specification | |
---|---|
Design | Double Acting Piston Cylinder |
Bore | 2” to 20” |
Stroke | Up to 20” Standard (Larger sizes are available on request) |
Working Pressure | 7.0 Kg/cm2 (Max) |
Temperature Range | -200 C to 800 C |
Sensitivity | 0.5% of Full Stroke |
Control Signal | 0.2 to 1.0 Kg/cm2 (3-15 PSIG) |
Air Consumption | 1.0 SCFM at 80PSIG |
Thrust | Available thrust may be considered as 70% of Cylinder Bore Area multiplied by operating air pressure |
Mode of Action | Linear |
Connection | ¼”/1/2” NPTF/BSPF |
Accessories (Optional) | Valve Positioner - Pneumatic, Electro Pneumatic, Air set, Air Lock, Solenoid Valve, Volume Booster, I/P Converter, Position, Transmitter, Limit Switches, Proximity Switches etc. |