Vajra BioMetrix Pvt. Ltd.

Mahendra Hills, Secunderabad, Telangana

Partec offers a wide range of compact, desktop flow cytometry systems, with up to 5 light sources and up to 16 optical parameters, covering dedicated scientific and industrial applications from the routine to the complex, high-end research.

Partec technology is based on computer-controlled flow systems, modular optical systems with advanced photomultiplier tubes for all optical channels, the most recent computer and electronic technologies, as well as the fastest and most precise 16 bit analog-to-digital converters. All flow cytometry applications in healthcare, microbiology, industrial applications, like food quality control, as well as plant and animal cytology benefit from the unique Partec microsecond real-time acquisition, making it possible to carry out real-time, absolute counting of cells, cellular subsets and other particles on a volumetric basis. This True Volumetric Absolute Counting technique is a unique feature of Partec flow cytometry systems, which is not found in any other flow cytometers. In addition to the absolute count, the cell or particle concentration is also determined for each sample. No additional cell counter, such as an electrical impedance cell counter, or reference bead is required when using a Partec flow cytometer.

KAN-THT (india) Pvt. Ltd., a subsidiary in India for k-Analys AB. K-Analys AB is a Swesen based company for Thermal Constants Analyser test system for analysing thermal transport properties from a single measurement. The unique TPS (Transient Plane Source) technology provides capabilities to perform fast & simple testing of Thermal conductivity, Thermal diffusivity and specific heat capacity covering wide range of temperatures and geometry for solids, liquids, thin films, pastes and powders.

Hot Disk offers a selection of instruments for testing and measuring thermal conductivity, thermal diffusivity and specific heat capacity.

TPS Advantages

The advantages of using a TPS instruments involve the following:

• The method is non-destructive.
• Contact resistance between sensor and sample does not influence measurement results.
• Porous and transparent samples are easy to test, without modification.
• Surface roughness or surface color does not influence measurement results.
• Minimum- or no sample preparation.
• Double-sided testing for maximum accuracy.
• Optional single-sided QC-testing for maximum ease.
• Instant and fully consistent thermal conductivity results.
• Three thermal transport properties measured in a single transient.
• No calibration or reference sample verification required. (The TPS technique is an absolute technique.)

A power compensation reaction calorimeter giving rapid determination of both exothermic and endothermic reaction enthalpies. Modes of operation include, Titration, Isothermal, Step-Isothermal, Scanning and Heat Capacity measurement.

An instrument designed to give you rapid access to exothermic data. This instrument allows you to run up to 6 samples simultaneously with full thermal and pressure data. Advanced quantitative software

Regula 5001MK.01 has a set of light sources of visible, infrared and ultraviolet spectral ranges and imaging filters used for carrying out forensic expertise. The microscope enables to capture,

The information reference system Currency is intended for express authenticity verification and advanced examination of banknotes from different countries that differ in series and denomination.

Regula 10 are compact devices constructed in a shockproof plastic body. The devices are powered by two batteries. All models are equipped with a diopter adjustment ring.

TheNew Full Spectrum COLOR Imaging System (FSC)is the most advanced forensic image capturing system in the world. The FSC features a patented 16MP digital camera with 78mm UV lens. Now, for the first time,

TheFSIS lab systemis designed specifically for a laboratory environment. A large display and articulating arm allow for clear, fast evidence scanning. Achieve hands-free image capture with a mounted UV light and a foot pedal

The KD Scientific Legato series offers unparalleled ease of use through the high resolution touch screen user interface. The full touch screen interface enables the user to quickly create configurations and recall them for ease of use. The TFT color display presents all the pump operating parameters on an easy to view run screen.

The password feature prevents accidental configuration changes ensuring the program integrity is retained. The pumps are versatile and can be interconnected through the RS485 interface. Legato series models can be mixed and matched in the daisy chain offering maximum flexibility. Up to 99 pump can be linked together through the RS485 interface.

The Legato optimizes your lab bench space. For limited laboratory space the Legato series can be placed on its side to reduce the footprint. The display can also be changed to allow the user to operate the pump vertically.

LEGATO INHERITS KD SCIENTIFIC'S LEGENDARY RELIABILITY

Our experience in pumps and fluidics was used to create the Legato Series. Over the years, customers had asked to display more information simultaneously and make it easier to configure and run complicated multi-step programs. The high resolution touch screen interface offers unparalleled ease of use. Todays demanding applications require better flow performance and repeatability down to 1 nl/hr. Legato offers 0.35% accuracy and 0.5% repeatability.

DESIGNED TO MEET TODAYS CHALLENGES

In todays economic environment, multiple users with different experiments are using the same pump. The next generation of pump had to meet this demand to store and recall multiple programs. The pumps role in the experiment now changes more readily with multiple users and multiple tests being done using a single pump.

ENGINEERED TO MEET GLOBAL REGULATORY COMPLIANCE

Worldwide use of our pumps and changing regulatory compliance meant designing the pump to meet RoHS and WEEE, CE, UL, CSA, and CB schemes. The Legato has lead free boards and is designed to the latest safety and EMI/RFI standards.

The NEW KD Scientific Allegro Peristaltic Pump System allows maintenance free, continuous flow pumping of various liquids. The fluid contacts only the inside surface of the tubing negating concern for valves, O-rings or seals that might be incompatible with fluid being pumped.

• Clearly displays flow rate and total dispensed volume
• User configurable multi-step operation
• Dispenses in forward or reverse direction
• Adjustable flow rate while pump is running
• Stackable sealed remote pump drive with ip 32 rating
• Selectable tubing table
• Automatic tubing break-in
• Automatic calibration procedures
• External connectivity with USB interface and I/O port
• Easy to maintain

KD Scientific syringe pumps are ideal for delivering accurate and precise amounts of fluids for a multitude of syringe pump applications including infusing calibrant into a mass spectrometer or reaction chamber, long term drug infusions to animals and general infusion applications.

KDS syringe pumps are known for their outstanding reliability and performance. The KDS 100 series syringe pumps give you the most cost effective solution for infusing fluids. Alternatively, the KDS 200 series gives you the advance features with RS232 and TTL interfaces. All the KDS 200 series pumps can be daisy chained together to create a syringe pump network.

Syringe pumps with infuse and withdraw capabilities provide maximum flexibility for varied applications. This feature permits applications such as automatic withdrawal of samples and unattended filling of syringes, fluid level adjustments with continual infusing and withdrawing and the infusing of drug or nutritional materials and diffusion into chemical reactors.

Continuous flow can be achieved using a syringe pump simply by adding a 3 way valve. A push/pull style syringe pump can continuously cycle allowing two syringes to dispense fluid while the opposite two syringes are refilling. When the end of one cycle is reached, the pump reverses and the delivery continues. This method will allow a pump to deliver continuously 24/7.

The new KD Scientific EZFlow Pump Series, is a line of economical pumps for simple infusions and dosing applications. The pumps are designed to combine high levels of performance together with ease of use and reliable operation. KD Scientific EZFlow products offer a complete line of pumps to meet many different applications. Micro-infusion pumps, volumetric infusion pumps, syringe pumps, portable pumps and disposable pumps are available at affordable prices.

• capacity from 85 to 299L
• plastic or stainless steel interior
• two temperature ranges depending on model:

-25.0C

-35.0C

• chamber capacity from 25 to 106 litres
• transport in stable temperature, e.g. +4C
• adjustable temperature from

-18 to +10C

• Chamber capacity from 15 to 1000 litres
• temperature range ambient +5.+300C
• stainless steel interior

• Chamber capacity from 56 to 1000 litres
• temperature range ambient +5.+300C
• stainless steel interior
• Sterilization Programs

Furnaces and ovens are used in laboratories all over the world. Thermcraft is the exclusive supplier of furnaces and ovens to some of the leading materials testing system manufacturers. LAB-TEMP furnaces