VAIBHAV EQUIPMENT SERVICE

Sabarmati, Ahmedabad, Gujarat

• Min. Order (MOQ) 1 Set(s)
• Type Air Samplers
• Application Air Sampling
• Nominal Capacity 1.0 Cubic Meter Per Minute
• Rated Voltage 220V
• Power Source Electric
• Warranty 14 Month
• Automation Grade Automatic
• PM2.5 SIZE SEPARATION Two stage Impactor confirm to USEPA design, sample collected in a separate 46.2 mm diameter PTFE membrane filter fitted at the bottom of WINS IMPACTOR having cutoff for particle greater than 2.5micron
• PM10 SIZE SEPARATION Single stage Impactor confirm to USEPA design, sample collected in a separate 46.2 mm diameter PTFE membrane filter fitted at the bottom having impaction inlet for cutoff particle greater than 10micro
• PM2.5 Filter Media 46.2mm dia PTFE or equivalent filter media recommended in sampling method in a filter cassette housed in each stream of filter holder assembly fitted in the bottom of WINS impactor below of two stage
• PM10 Filter Media 47mm dia Glass fiber filter / PTFE or equivalent filter media recommended in sampling method in a filter cassette housed in each stream of filter holder assembly fitted below single stage impactor.
• PM2.5 & PM10 FILTER HOLDER Design to hold 47mm dia filter media, separate filter holder for PM2.5 & PM10
• PARTICULATE SAMPLING at a constant 16.7 LPM (1m3/hour) unaffected by voltage fluctuation and filter chocking control through microprocessor base digital flow controller, provision for measurement of PM2.5 and PM10 flow st
• Sample Volume Separate Cumulative volume for air to be measure for each particulate stream say for PM2.5 and PM10.
• GASEOUS POLLUTANT SAMPLING Four inlet & one outlet with needle valves for flow control of each unit through 2.0 LPM acrylic body rotameter with 0.05 LPM graduation
• Clock / Timer System Programmable Real Time control system with control of automatic start & stop of instrument having digital display of current date and time, with total sample duration.
• Power Requirement Single phase AC 220 volts, 50 Hz, sampler unaffected by +/- 10 % fluctuation in supply voltage.
• Power Interruption Automatically log the instance of power interruption during sampling, on resuming power, the sampling shall automatically resume with the previously accumulated volume and runs for the remaining durat
• Ambient Temperature Sensor One number Robust, corrosion-free polycarbonate small lightweight housing recommended for use in harsh environmental condition having measuring range from - 40oC to +65 oC, Resolution 0.1 oC,
• Filter Temperature Two number Robust, corrosion-free polycarbonate small lightweight housing recommended for use in harsh environmental condition having measuring range from - 40oC to +65 oC, Resolution 0.1 oC, separate
• Data Logger (Electronic Module & controller) Time Totalizer : RTC based record the operating time for each sample in hours and minute. Also record instrument stoppage due to pre set control.
• Data Logger (Electronic Module & controller) Volumetric Flow Rate compensation : Performed automatically by logger using sensor for Ambient Temperature, Barometric Pressure and filter pressures
• Data Logger (Electronic Module & controller) Flow Totalizer : Automatically volume totalized using sample flow & running time in minute
• Data Logger (Electronic Module & controller) Parameter Display : Flow Rate of PM2.5 & PM10 channel, Volumetric Flow of PM2.5 & PM10 channel, Filter Temperature of PM2.5 & PM10 channel, Barometric Pressure, Filter Pressure of PM2.5 & PM10 channel
• Data Logger (Electronic Module & controller) Parameter Recording : Internal memory based system record all the parameters display on logger along with Station ID, Filter ID, Sampler start time etc.
• Data Logger (Electronic Module & controller) Auto Operation : Auto shutoff if flow rate drops by more than 10 % from set value of 1m3/hr
• Data Logger (Electronic Module & controller) Acceptance Testing : Flow Check, leak Check, Memory,
• Data Logger (Electronic Module & controller) Software : Data can be save in CSV or Excel format which can easy access in any operating system
• Data Logger (Electronic Module & controller) Memory : Field facility available for copy, erase, view(last sample summary), available free space

Additional Information:

• Min. Order (MOQ) 1 Set(s)
• Type RESPIRABLE COMBO DUST SAMPLER
• Weight 30-40kg
• Voltage 220V
• Condition New
• Power Source Electricity
• Feature Durable, Eco Friwndly, Fast Cleaning, Fine Finished, Precise Design
• Warranty 14 MONTH
• Display Ananlog, Digital
• Flow Rate 1-1.5m3
• Automation Grade Manual, Semi Automatic
• Brand Name VAIBHAV
• Power 220 VAC
• Confirm to Standard IS 5182
• Availability of Test Report From Central Govt/NABL/ILAC accredited lab to prove conformity to specification
• Flow Rate (Particles) PM 10 0-3 m3/min
• Flow Rate (GAS) 0-3 LPM
• Flow Rate Tolerance(%) 1.0
• Type of Respirable dust sampler Dual Mechanism 2.5 and 10.0 Sampler
• Blower Brushless and Noiseless
• Blower (Nominal Maximum operation time) 27 Hours
• Provision of Collection of more than 10 micron particles Yes
• Impactor design Single stage as per EN12341
• Parameters on Display Flow Rate, Volumetric Flow, Barometric Pressure, Ambient Temperature, Filter Temperature
• Timer System Programmable Real Time control system with automatic start & stop
• Clock System Digital display of date & time of sampling
• Temperature Sensors -5 Deg.C to 55 Deg.C
• Sampling Time Record 0 to 9999.99 hrs. recorded on a Time Totalizer
• Sampling Time in Hours 0 - 24 Hours with automatic sampling
• Power Requirement Nominal 220 V, Single Phase, 50Hz AC mains supply
• Automatic Shutoff Flow Control Automatic Shutoff
• Housing Aluminum
• Body Stand Separate Trolley Stand without Castors
• Supply of Filter paper with machine 1 Nos.

Additional Information: