GST : 07AAPFV9945C1ZM
Verified
Add Review
Our Products
Analyzers And Analytical Instruments
2 Products availableTube Light
2 Products availableRulers
2 Products availableFabric
2 Products availableLaboratory Equipments
2 Products availableInduction Cooktops, Gas Stoves & Burners
1 Products availableElectric Cutting Tools
1 Products availablePollution Control Machines & Devices
1 Products availableBlades
1 Products availableOur product range contains a wide range of Pilling Tester, Single Yarn Twist Tester, Washing Fastness Tester, twist tester and Tensile Strength Tester
v2 twist tester hand operated (for 25-250mm) single yarn
.
twist tester fully automatic microprocessor based upto 500mm gauge length
.
v2 shrinkage template consists of a set of 2 templates to measure shrinkage or stretch as a percentage change in length & width wise ( warp weft ) direction in a fabric generally shrinkage or stretch in a fabric is measured after washing & tumble drying, flat drying or line drying.
the bigger template has slots in both vertical & horizontal direction. The distance between the slots in each direction is 350 mm. This template is placed on fabric & marks are put on all slots by a marking pen which easily goes inside the slot. After marking fabric is washed & dried. Now the smaller template with 5-10-15 marked on it & also with 2 slots 350 mm apart is placed on the marks in each direction. Observe the position of one of the marks ( out of 2 in each direction ) on the scale printed with 5-10-15 & see if there is shrinkage or stretch. The reading ( position of mark on scale ) is the shrinkage or stretch %.
the ability of textiles to recover from creases is determined by measurement of its crease recovery angle. In this test the test specimen is first creased under a specified load for specified period of time and it then transferred to the angle measuring device where one of its ends is held in a spring loaded clamp while the other end is allowed to fall freely under its own weight. This clamped end is slowly rotated till the free end becomes vertical. The angle of deflection of the clamped end from the horizontal is read on a scale fixed to theability of textiles to recover from creases is determined by measurement of its crease the moving clamp. This angle gives the measure of the crease recovery.
v2 button snap pull testeris an user friendly equipment to testsnap strengthof buttons / rivets/joints to ensure that it meets design tolerance and safety levels, particularly in baby clothing
the equipment comprises of
imada push-pull force gauge of 20 kgf.
vertical stand to hold the gauge with arrangement to change the position of gauge .
base which houses the frame to grip the attachment
button pull fixture connected with force gauge.
suitable to grip buttons from 5 mm to 25 mm.
the needle in the gauge stops at the breaking load.
.
Additional Information:
Packaging Details : 1 button pull and 3nos grip with calibration certificate
Delivery Time : 5-6 days
Sangam Vihar, Delhi 