Our Products
Insulators And Insulation Materials
1 Products availableMattress
1 Products availableWool
1 Products availablePackaging Foam
1 Products availablePET Granules & Plastic Raw Material
1 Products availableInsulators
1 Products availableHoses, Hose Assemblies & Fittings
1 Products availableOur offered Product range includes Duraflex, DURA RODS, INSU Reflector, Prote Carmour and Protec Capcell.
DURAflex Is A Pre-Moulded, Compressible Filler Board, With High Performance Closed-Cell Joint Filler Material Available In Board Form. It Is Suitable For Use As Expansion Joint Filler In Concrete, Brick, Block Work And Isolation Koints, Where Readily Compressible, Low Load Transfer Joint Filler Is Required.
Applications:
Features:
The Circular Profile Of DURArods Ensures Stronger Bonding Of Sealant With Masonry, Aluminium Of Other Substrates & Hekps To Maintain Desired Thickness Of Sealant At The Joint's Cnter.
It Does Not Allow Sealant Wastage Through Seepage. DURArods Does Not Bond With Cold Applied Sealants & Allows Unrestained Expansion & Contraction Of Sealant.It Eliminates Bubbling Of Sealant Due To Its Closed Cells.
Applications:
'INSU Reflector' Is A Radiant Heat Reflective Insulation Material Made Of Polyethylene Air Bubble Film (ABF) Laminated With Aluminum Foil On One Or Both Sides. It Is A Low E-Reflective Insulation Material With A Low Mass To Air Ratio, Which Effectively Blocks The Radiant Heat Transfer. The Bright Surface Of The Aluminium Foil, Which Encases The FR Polyethylene Air Bubble Material, Reflects 96% To 99% Infra-Red Radiation Received By The Surface Of The Heated Slated Roof. The Placement Of The Radiant Barrier Shall Be In A Manner To Provide An Air Space Below The Roofing Sheets Or Between Vertical Cladding For Its Effective Utilization.
Features & Benefits :INSUshield (Formerly SIL-XL-C)
'INSUshield' Is A Non-Fibrous, Fire Retardant, Closed Cell, Tri-Dimensional Chemically Crosslinked Polyethylene Foam. Conforms To 'Class 0' For Fire Propagation And 'Class 1' For Surface Spread Of Flame. It Is An Ideal Environment Friendly Material, With A Perfect Solution For All Your ' Thermal Insulation Needs.
Features & Benifits:
Applications:
AC / Humidification Duct InsulationUnder Deck InsulationPipelinesAcoustic Flooring Etc.
Available In:
Sheet Form, Roll Form And Pre-Formed Pipe Coverings
Plain Material Available In Thickness Of 3 Mm To 13 Mm In Single Layer With 1250 Mm Width.Over 13 Mm Thickness In 1220 Mm Width And Laminated Material Is Available In 1220 MmWidth From 3mm And Above
With Various Factory Applied Iaminations Such As MET PET Film, Aluminium Foil, UV Barrier Film, Adhesive Backed With Peel Off Paper Etc., For Diverse Applications
INSUshield Is Available In Various Widths And Thickness And Also In Preformed Tubing Profile 1/4'' To 8''Pipe ID, To Match The Requirement Of Copper, M.S., G.L. And Plastic Pipes
XLPE Is A Non-Fibrous, Fire Retardant, Closed Cell, Tri-Dimensional Chemically Crosslinked Polyethylene Foam
Application
IndustrialPackaging & GasketConstructionAutomotiveSports & Leisure Products
A Range Of Polyester Reticulated PU Foam. Offers Good Filtering Characteristics, Lower Pressure Drop Thus Providing Constant Pure Air For Your Engines, Equipments Or Clean Rooms. Suitable For Use In Pre-Filters Or Air Filters.
Products AvailableFrom 10 Ppi To 80 Ppi,
In Sheet Size 1 Mt. X 2 Mt. As A Standard,
In Various Colours.
KFOINK S140-180
Open Cell Rubber Insulation Material For Sound Absorption. Ideal For Sound Absorption In Various Application Viz. Air Conditioning Duct Lining, AHU Rooms, Generators, Enclosure Lining, Industrial Noise Control, Marine & Offshore Application
Supplied In Different Formats And Thickness, Based On Customers Requirements
PROTECarmourIs A Special Purpose, Expanded Polyethylene Foam Of A Closed-Cell Structure. The Superior Properties Of PROTECarmour Make It Really Versatile For A Variety Of Uses Across The Industries. It Fulfils Your Packaging And Transportation Objectives That Are Functional And Cost-Effective. Above All, It Ensures Total Protection Of Your Product. Available In Rolls, Sheets & Customised Fabricated Product Forms With High Density Options.
Thickness :1mm - 100mm
PROTECcapcellIs A Closed Cell, Cross-Linked Polyethylene/EVA/Rubber Foam Manufactured By Bun Process. The Product Has Unique Features Like Better Mechanical Properties Yet Very Light Weight, Fine Microcellular Structure. It Is A High Performance PE - EVA Sheet For Applications Requiring High Resilience, Good Buoyancy, And Protective Foams. The Product Can Be Thermoformed. Available In Various Grades Of Hardness & Densities With Customisation Option Like Colours, Sizes, Thickness Etc.
Thickness :1.5mm Onwards
Density :64 To 280 Kg / M3
Hardness :3 + 2 To 604 ShoreA
Custom Made Fitments / Buffers Designed To Suit Products Packing Requirements.
Thickness Available (Sheets) :6, 9, 13, 16, 19, 25, 32 Mm
Thickness Available (Tubes) :6, 9, 13, 16, 19 Mm & ID - 15/8 Inch
Nitrile Foam For Cushioning Application With Thermal Properties
Insulation Products Designed For The Insulation On Very Large Surfaces. K-Flex St Sheets 1000/1500mm In Width Are Ideal For Metal Aluminium Ducts And Pipes Of Large Diameters Since, Reducing The Number Of Segments And Simplifying Installation, They Noticeably Cut Down Labour Costs
EASY APPLICATIONECONOMICALCONTINUITY OF INSULATIONGUARANTEED ELASTICITY AND STABILITY
Options :Class 1 & Class O
Class 1
Thickness :6mm - 19mm
Width:1.2mt
Class O
Thickness :6mm-19mm
Width:1mt
Option :Plain, Alluminium Foil Facing & Self Adhesive
K-FLEX ST Offers All The Properties To Meet The Many Needs In The Fields Of Civil And Industrial Plants For Refrigeration, Air-Conditioning, Heating And Plumbing, The Insulation Of Tanks, Pipe Fittings, Water Ducts And For All Applications That Demand The Use Of Insulation Material Without Neglecting The Price/Quality Relationship.
Options :Class 1 & Class O
Class 1
Wall Thickness :6mm, 9mm, 13mm
ID :1/4" - 3 1/2"
Class O
Wall Thickness :9mm, 13mm, 19mm, 25mm, 32mm
ID :1/4" - 4 1/2"
Twiga Fiberglass Wool Insulation Is A World Class Insulation Product Manufactured In India Twiga Is Made Of Fine, Long, Inorganic Glass Fibers Bonded By High Temperature Resin And Is Widely Recognised For Its Energy Conserving And Sound Insulating Properties Fibreglass Insulation Is Used With Great Success In The Industrial, Building And Air-Conditioning Industries.
Applications :Thermal, Acoustic, Air Conditioning, Roofing, Cryogenic, Partitions, Vessels, Marine, Automobiles, Refrigeration, Ducting, Etc.
Facing:Aluminium Foil, Black/White Glass-Tissue, Vinyl Facing, Kraft Paper Can Available In Roll & Slabs Form.
Density:12, 16, 24, 32, 48 & 64 Kgs / M3
Temperature Range:Twiga Insul Is Suitable For Applications Ranging From (-) 195'C To (+) 230'C For Special Applications Upto 450'C, High Temperature Binder Is Available Aluminium Foil Facing Is Suitable Upto 120'C.
Twiga Flexible Duct Designed For HVAC Systems Is Strong, Light Weight, Fully Flexible, Compressible Yet Dimensionally Stable.
Application And Benefits:Twiga FGT Series Fiberglass Tissue Is A Non-Woven Felt Made Of Randomly Oriented Glass Fiber Distributed In A Special Binder By A Wet-Lay Process.
Application:Serves As A Wrap For Both Underground And Overground Pipeline Systems To Counter Natural And Artificial Corrosion.
Suitable For In-Situwaterproffing Or Waterproofing In The Form Of A Roofing Felt.
Serves As Both A Reinforcement And Protection System. Compatible With Bitumen, Asphalt And Coal Tar Enamels.
Rock Wool Lightly Resin Bonded Mattresses (LRB) Consists Of Fine Fibers Spun From Selected Rocks Melted At High Temperature And Bonded With A Thermosetting Resin. They Are Machine Laid Fiber Lay Pattern And Are Baked To Form Mattresses Of Predetermined Density And Thickness.
Mattresses Are Then Slit And Stitched To Specified Dimensions . It Has Controlled Thickness And Density Resulting In Predictable Heat Losses.
Mattresses Manufactured From Selected Rocks To State Of The Art Specification Fully Conform To National And International Standards Such As IS : 8183 - 1993 BS : 3958 Part - 3 ASTM:C592 - 80
Application:
LRB Mattresses Are Used For Hot & Cold Insulation To Conserve Energy It Is Used In The Thermal Insulation Of Large Vessels, Boilers, Equipment, Ducts, Flanges, Valves And Plants Operating At High Temperatures.
Service Temperature:
-50 To + 750 DEGREE CENTI GRADE
Availability:
Standard Dimensions | 1.640 X 1.220 M |
Thickness - MM | 25,40,50,60,65,75,100 |
Density (Kg/M3) | 100, 120, 128, 144, 150 |
Wire Netting | 1/2"X22G, 3/4"X24G, 1"X20G |
Specification | As Per IS:8183 |
Test Method | As Per IS:3144 |
Max Service Temperature | 750°C |
Loose Mineral Wool Is A High Temperature Insulating Fibers Processed From Natural Rocks Of Selected Quality. The Loose Mineral Wool Having Exceptionally Long Fibers And Superior Technical Properties Essential To Meet Severe Service Condition. Loose Mineral Wool Can Be Used For Insulating Equipments, Tanks, Pipelines, Ovens, Furnaces, And Buildings. The Properties Of Loose Mineral Wool Includes Incombustibility , Water Repellent, Odorless, Non-Corrosive , Non-Settling, Fire Resistant, Heat Resistant And Sound Absorption.
The Loose Mineral Wool Is Felted Uniformly In Required Thickness And Density, Laminated With Both Side G.I. Wire Nettings Which Are Used For Insulating Industrial Environment, Large Vessels, Hot And Cold Air Ducts, Heat Exchangers Etc.
Service Temperature:
-50 To + 750 DEGREE CENTI GRADE
Thermal Coductivity:
Loose Mineral Wool Has Extremely Low K Values For Wide Range Of Temperature. Typical Thermal Conductivity Values For Various Densities And Mean Temperature Are Shown In The Graph.
Compression Resistance:
Loose Mineral Wool Offer High Resistance To Compression. It Has Good Resilience And Regain Their Nominal Thickness After Removal Of Normal Compressive Load.
Moisture Resistance:
Loose Mineral Wool Are Good Resistant To Vapor, Most Common Salts And Chemicals. It Is Moisture Resistant And Do Not Absorb Moisture From Atmosphere.
Product Specification | IS3677 |
Size Of Loose Wool Mattresses | 1640mm X 1220mm |
Thickness | 25mm To 100mm |
Metal Facing | G.I. Hexagonal Wire Netting Of Size 3/4”×24G. Other Sizes On Request |
Standard Packing | Loose Mineral Wool Packed In HDPE Bags Of 40 Kg. Each And Mattress In HDPE Covers. |
Brand:Turbofix
Grades:PU-Ultra, PU-Premium, PU-Plus
RB Slabs Are Resin Bonded Slab Consists Of Long Fine Fibers Spun From Molten Natural Rocks And Bonded With A Thermosetting Resin Slabs Have The Best Combination Of Thermal Insulation, Fire Protection And Sound Absorption Properties.
Application:
Rockwool Slabs Are Designed For A Wide Range Of Applications, At Both High And Low Service Temperatures. It Can Be Used On Flat Or Slightly Curved Surfaces For Thermal And Acoustic Insulation. They Are Also Suitable For Thermal Insulation Of Ducts, Large Vessels, Cavity Wall, Curtain Wall And Sandwich Panels.
Service Temperature:
-50 To + 750 DEGREE CENTI GRADE
Availability:
Standard Dimensions | 1 X 0.500 & 1.220 X 0.750 M |
Thickness - MM | 25,30,35,40,45,50,55,60,65,70,75,80,90,100 |
Density (Kg/M3) | 48,64,96,144 |
Group / Grade | I,II,III,IV |
Specification | As Per IS:8183 |
Test Method | As Per IS:3144 |
Max Service Temperature | 750°C |
IXPE Is An Irradiation Cross-Linked Polyethylene Foam That May Be Expanded From 3 To 50 Times And Has A Closed Cell Structure. Compared With Other Foams, IXPE Has Better Characteristics In Mechanical Properties, Dimensional Stability, Lightweight Properties, Heat Insulation Properties, Heat Resistance, Chemical Resistance And Fabricability. IXPE Is Therefore A Very Versatile And Popular Material Used Extensively In The Field Of Packaging, Building And Construction, Sundry Goods Etc.
Application
IndustrialPackagingConstructionAutomotiveSports & Misc
INSU BoardIs A Closed Cell Rigid Extruded Polystyrene Board, Which Develops A Continuous Skin, Derived From Its Process Of Manufacturing. The Continuous Skin Surfaces Make It Impervious To Moisture Absorption, Under Varying Ambient Temperature Conditions. The Closed Cell Structure And Uniform Surfaces Combined With The Light Weight Of INSUboard Support The Imposed Loading During Over Deck And Critical Floor Applications. The Low Thermal Conductivity Of The Product Offers Energy Savings, Comfort For Occupants Of The Building And Durability To The Water Proofing System Deployed. These Propertied Of INSUboard Make It A Preferred Products For The Suggested Areas Of Application In Comparison To Other Existing Materials.
Features & Benefits: