• MOQ 2750 10 MT Per load
• FinishingPolished
• MaterialCement
• CertificationISO 9001:2008 Certified
• Operating TypeAutomatic
• ShapeRectangular
• ColorGray
• Brick TypeLight Weight
• TypeFly Ash Brick
• Eco FriendlyYes
• Fire ResistanceYes
• Fly Ash BricksGrey
• Water Absorption (%)Yes
• Country of OriginIndia
• Water ProofYes

• MOQ 250 10 MT Per Load
• Dry mix mortarGrey

CELL O CON Dry Mix Mortar   (Joint Mortar) for Fly Ash Bricks and Blocks  is ready to use dry mix mortar formulated by blending selected cement binders, graded aggregates and chemical addives. CELL O CON Dry Mix Mortar (Joint Mortar) is ready to use by just mixing into water at the site. This process eliminates job site mixing process of convenonal cement mortar rao by adding specified quanty of cement and sand with water separately.   CELL O CON DRY MIX MORTAR - ADVANTAGES Internaonal, Branded Standard Polymer has been used for adhesive, bonding, flexural strength, tensile strength & compressive strength. Water resistance more than 95%. Ready to use dry mix mortar, requires only water. Uniform & High strength and smooth surface finish Thin bed applicaon helps in clean and neat laying pracce, resulng in considerable saving in material consumpon No curing required aer laying Fly Ash bricks & Blocks. Provide sill bond beam and Lintel bond beam improves the stability of the wall and cracks in the walls will be avoided. Bricks to be laid according to BIS 1905-1987 STORAGE: Always store CELL O CON Dry Mix Mortar in a dry place, off the ground and well covered. Reject hard or lumpy material. SHELF LIFE: CELL O CON Dry Mix Mortar's shelf life is 3 Months in ghtly sealed bags. PACKAGING : In 40 Kg bags. For Fly Ash Bricks & Blocks

• MOQ 2500 10 MT per load
• MaterialCement
• ColorGrey,Red,Yellow
• TypePaver Block
• Thickness50-60mm,70-80mm
• Paver BlockGrey, Red, Yellow
• Country of OriginIndia

• MOQ 1200 10 MT per load - 4"
• MaterialAerated Concrete, Cement
• ApplicationSide Walls, Partiton Walls, Floor
• TypeAac Block
• Country of OriginIndia
• ProcessingMachine
• certifacationIso Certified
• AAC Blocksgrey

• MOQ 2500 10 MT per load
• Cool Roof Tileswhite

CELL O CON AAC Cool Tiles will act as a light weight, water proofing, lesser dead load on the roof, less thermal conductivity and high thermal resistance material. CELL OCON AAC Cool Tiles will act as weather proof material.CELL O CON AAC Cool Tiles will save recurring energy costin air conditioning heating.   CELL O CON AAC COOL TILES - DIMENSIONS 600 x 200 x 50mm 600 x 200 x 75mm 600 x 200 x 100mm This thickness for over deck insulation over theroof slab and under deck insulation below the roof slab.These AAC Cool Tiles are manufactured in the same process as for AACBlocks.   CELL O CON AAC Cool Tiles are used for over deck insulation,  on the roof slab, for thermal insulation andwater proofing. These AAC Cool Tiles will be laid to therequired slope by using 50mm, 75mm and 100mm thick over the roof slab by using water proof mortar of requiredthickness

• MOQ 400 Per load 10 MT, 20kgs
• Tile AdhesiveGrey

CELL O CON TILE ADHESIVE is a cemenous powdery substance that forms a paste when mixed with water or some special liquid addives. This forms bedding for the les over the substrate. Tile adhesives give an excellent bond on cemenous surfaces like concrete and plaster. Tiles can be posioned over this bedding which binds them and keeps them in place. Adhesive forms a waterproof barrier between two surfaces and has excellent grab properes. CELL O CON TILE Adhesives come in different formulaons for Tile on Tile , Ceramics floor & wall Tile Adhesive , Vitrified Floor & wall Tile Adhesive . The pracce of laying the floor and wall les with the spacers is to avoid the expansion and shrinkage of les. The joint between the les can be filled with le groung of the required color.

• MOQ 2750 10 MT Per load
• MaterialCement
• FinishingPolished
• CertificationISO 9001:2008 Certified
• Operating TypeAutomatic
• ShapeRectangular
• ColorGray
• Brick TypeLight Weight
• TypeFly Ash Brick
• Eco FriendlyYes
• Fire ResistanceYes
• Fly Ash BricksGrey
• Water Absorption (%)Yes
• Country of OriginIndia
• Water ProofYes

• MOQ 250 10 MT Per Load
• Dry mix mortarGrey

CELL O CON Dry Mix Mortar   (Joint Mortar) for Fly Ash Bricks and Blocks  is ready to use dry mix mortar formulated by blending selected cement binders, graded aggregates and chemical addives. CELL O CON Dry Mix Mortar (Joint Mortar) is ready to use by just mixing into water at the site. This process eliminates job site mixing process of convenonal cement mortar rao by adding specified quanty of cement and sand with water separately.   CELL O CON DRY MIX MORTAR - ADVANTAGES Internaonal, Branded Standard Polymer has been used for adhesive, bonding, flexural strength, tensile strength & compressive strength. Water resistance more than 95%. Ready to use dry mix mortar, requires only water. Uniform & High strength and smooth surface finish Thin bed applicaon helps in clean and neat laying pracce, resulng in considerable saving in material consumpon No curing required aer laying Fly Ash bricks & Blocks. Provide sill bond beam and Lintel bond beam improves the stability of the wall and cracks in the walls will be avoided. Bricks to be laid according to BIS 1905-1987 STORAGE: Always store CELL O CON Dry Mix Mortar in a dry place, off the ground and well covered. Reject hard or lumpy material. SHELF LIFE: CELL O CON Dry Mix Mortar's shelf life is 3 Months in ghtly sealed bags. PACKAGING : In 40 Kg bags. For Fly Ash Bricks & Blocks

• MOQ 2500 10 MT per load
• MaterialCement
• ColorGrey,Red,Yellow
• TypePaver Block
• Thickness50-60mm,70-80mm
• Paver BlockGrey, Red, Yellow
• Country of OriginIndia

• MOQ 1200 10 MT per load - 4"
• MaterialAerated Concrete, Cement
• ApplicationSide Walls, Partiton Walls, Floor
• TypeAac Block
• Country of OriginIndia
• ProcessingMachine
• certifacationIso Certified
• AAC Blocksgrey

• MOQ 2500 10 MT per load
• Cool Roof Tileswhite

CELL O CON AAC Cool Tiles will act as a light weight, water proofing, lesser dead load on the roof, less thermal conductivity and high thermal resistance material. CELL OCON AAC Cool Tiles will act as weather proof material.CELL O CON AAC Cool Tiles will save recurring energy costin air conditioning heating.   CELL O CON AAC COOL TILES - DIMENSIONS 600 x 200 x 50mm 600 x 200 x 75mm 600 x 200 x 100mm This thickness for over deck insulation over theroof slab and under deck insulation below the roof slab.These AAC Cool Tiles are manufactured in the same process as for AACBlocks.   CELL O CON AAC Cool Tiles are used for over deck insulation,  on the roof slab, for thermal insulation andwater proofing. These AAC Cool Tiles will be laid to therequired slope by using 50mm, 75mm and 100mm thick over the roof slab by using water proof mortar of requiredthickness

• MOQ 400 Per load 10 MT, 20kgs
• Tile AdhesiveGrey

CELL O CON TILE ADHESIVE is a cemenous powdery substance that forms a paste when mixed with water or some special liquid addives. This forms bedding for the les over the substrate. Tile adhesives give an excellent bond on cemenous surfaces like concrete and plaster. Tiles can be posioned over this bedding which binds them and keeps them in place. Adhesive forms a waterproof barrier between two surfaces and has excellent grab properes. CELL O CON TILE Adhesives come in different formulaons for Tile on Tile , Ceramics floor & wall Tile Adhesive , Vitrified Floor & wall Tile Adhesive . The pracce of laying the floor and wall les with the spacers is to avoid the expansion and shrinkage of les. The joint between the les can be filled with le groung of the required color.