Our Products
Packing Straps, Clips & Accessories
2 Products availableSeal Machines
1 Products availableFull Body Exercise Machines
1 Products availableLeading Manufacturer, Supplier & Retailer of Pneumatic Strapping Tool, Pneumatic Combination Tool and Pneumatic Sealless Tools.
We are specialized in dealing with a wide range of Pneumatic Strapping Tool in the industry. The Pneumatic Plastic Strapping Tool made accessible by us is made of high quality Polypropylene (PP) and polyester (PET) making it highly durable in nature. These pneumatic strapping tools are light in weight with friction weld joint. The joint strength of the strapping tools is depended on their make. Apart from that, we are one of the prime Compact Hand Operated Pneumatic Strapping Tool Suppliers in the country.
Technical Specifications For Below Models
| Model | Strap qualities | Strap dimensions | Weights | Joint | Strap tensions |
|---|---|---|---|---|---|
| P355 | Polypropylene (PP) and polyester (PET) | 10.0-16.0 x 0.40-1.05 mm | 5.0 kg (including suspension) | Friction weld joint with approximately 75% average joint strength, dependent on strap quality. | 400-2100 N, dependent on strap quality. |
| P356 | Suitable only for polyester (PET) | 16.0-19.0 x 0.40-1.35 mm | 5.8 kg (including suspension) | Friction weld joint with approximately 75 % average joint strength, dependent on strap quality. | 800-3700 N, dependent on strap quality. |
| P350 | Polypropylene (PP) and polyester (PET) | 12.7-32.0 x 0.50-1.27 mm | 16.5 kg (including suspension) | Friction weld joint with approximately 75 % average joint strength, dependent on strap quality. | 1300-3800 N, dependent on strap quality. |
We provide optimal quality Pneumatic Combination Tool in the industry. The Pneumatic Combination Steel Strapping Tools made available by us are ideal for strapping tubes, wire coils, and all kinds of small bundles. They are mainly used for strapping in metal industry. Our Pneumatic Combination Tools have pneumatically raised feed wheel that greatly assists the introduction of heavy steel straps. They are highly effective under shift and continuous working conditions. Moreover, we are one of the eminent Heavy Duty Pneumatic Combination Tool Suppliers in India.
Technical Specifications
| A480 | Due to its low weight the A480 does not necessarily have to be suspended. This permits more mobile operation. Ideal for strapping tubes, wire coils and all kinds of small bundles, it is a handy and popular tool in numerous industries. Available in two different tensioning levels. |
|---|---|
| Strap qualities | Regular duty steel strap (Uniflex) up to 850 N/mm2 High tensile steel strap (Ultraflex) up to 1100 N/mm2 |
| Strap dimensions | 10.0 - 19.0 x 0.38 - 0.63 mm |
| Weight | 4.6 kg (with suspension bracket) |
| Strap tensions | 2500 N, 4500 N |
| A482 | Due to its low weight the A482 does not necessarily have to be suspended. Straps of up to 0.90 mm thickness can be processed. The perfect double notch joint guarantees a strength of 75 %. The modern A482 optimizes the strapping of packages, mainly in the metal industry. |
| Strap qualities | Regular duty steel strap (Uniflex) up to 850 N/mm2 High tensile steel strap (Ultraflex) up to 1100 N/mm2 |
| Strap dimensions | 19.0 x 0.63 - 0.90 mm |
| Weight | 7.0 kg (with suspension bracket) |
| Strap tensions | 4000 N, 7000 N |
| A483 | Heavier and larger than the A482, the A483 is suitable for use in the same industries. Also supplied in two models, its main application is with 25 and 32 mm wide steel straps. Its pneumatically raised feed wheel greatly assists the introduction of heavy steel straps. Ideal for strapping steel coils, tubes and rods in all positions, as it can be fitted with four different suspension brackets. The A483 has proved its worth especially under shift and continuous working conditions. |
| Strap qualities | Regular duty steel strap (Uniflex) up to 850 N/mm2 High tensile steel strap (Ultraflex) up to 1100 N/mm2 |
| Strap dimensions | 25.0 - 32.0 x 0.80 - 1.00 mm |
| Weight | 19.5 kg (incl. suspension bracket) |
| Strap tensions | 7000 N, 9000 N |
| Models | Single button = fully automatic Two-button = semi-automatic |
The company is involved in offering a wide range of Pneumatic Sealless Tools that is highly acclaimed among the clients. Our Pneumatic Sealless Strapping Tools are used in various industries that include stationary, timber, and construction material industry. These Pneumatic Sealless Tools are effective for continuous operation under the most rigorous conditions. They are accessible in semi automatic mode as well. The uniform tension of the straps is guaranteed by the pneumatic drive. Further, we are one of the ace Pneumatic Sealless Steel Strapping Tools Suppliers in India.
Technical Specifications
| A380 | The A380 is used mainly in the timber and construction material industry. The massively constructed tool is characterized in particular by its reliability in shift work and with continuous operation under the most rigorous conditions. Supplied as a semi and fully automatic model, it is also produced in four tensioning levels. It is recommended to use the tool in suspended mode. |
|---|---|
| Strap qualities | Regular duty steel strap (Uniflex) up to 850 N/mm2 High tensile steel strap (Ultraflex) up to 1100 N/mm2 |
| Strap dimensions | 12.7 - 25.0 x 0.50 - 1.00 mm |
| Weights | 17.4 and 18.4 kg (with suspension bracket) |
| Strap tensions | 4500 N, 6500 N, 7500 N, 9500 N |
| Models | Single button = fully automatic Two-button = semi-automatic |
| A383 | The A383 is the big brother of the A380. Heavier and larger, it is intended for the same industries. Also available in two models; especially suitable for 25 and 32 mm wide steel straps. |
| Strap qualities | Regular duty steel strap (Uniflex) up to 850 N/mm2 High tensile steel strap (Ultraflex) up to 1100 N/mm2 |
| Strap dimensions | 19.0 - 32.0 x 0.63 - 1.30 mm |
| Weight | 24.0 kg (incl. suspension bracket) |
| Strap tensions | 10000 N, 15000 N |
| A384 | This tool, designed for stationary applications, tensions, seals and separates the strap automatically by actuating the appropriate keypad. It is produced in different tensioning levels and can process regular duty and high tensile steel straps. The uniform tension of the straps is guaranteed by a pneumatic drive. |
| Strap qualities | Regular duty steel strap (Uniflex) up to 850 N/mm2 High tensile steel strap (Ultraflex) up to 1100 N/mm2 |
| Strap dimensions | 9.5 - 20.0 x 0.38 - 0.63 mm |
| Weight | 10.5 kg (with suspension bracket) |
| Strap tensions | 2200 N, 3500 N, 4100 N, 6500 N |
| A390/A391 | Semi-automatic strapping tools for the pneumatic tensioning and manual sealless joining of steel straps. The pneumatic drive for the tensioning system guarantees fast and uniform tensioning. The low tool weight (5.1 kg) permits efficient working without the need for suspension. |
| Strap qualities | |
| A390 | Regular duty steel strap (Uniflex) up to 850 N/mm2 |
| A391 | High tensile steel strap (Ultraflex) up to 1100 N/mm2 |
| Strap dimensions | 09.5 - 20.0 x 0.38 - 0.58 mm |
| Weight | 5.1 kg (A390/A391) |
| Max. tension | 6000 N |
| A3H | With its short base plate the A3H is able to strap smaller packages. Thanks to its small dimensions and low weight it is suitable for a wide range of applications. Also supplied with a restrictor valve to permit the stepless regulation of the air supply, and in two tensioning levels. |
| Strap qualities | Regular duty steel strap (Uniflex) up to 850 N/mm2 |
| Strap dimensions | 9.5 - 20.0 x 0.38 - 0.60 mm |
| Weight | 8.9 kg (with suspension bracket) |
| Strap tensions | 2500 N, 4500 N Sealless notched joint |
| Fromm Packaging Systems | Steel Strapping Tools |
| A380 | The A380 is used mainly in the timber and construction material industry. The massively constructed tool is characterized in particular by its reliability in shift work and with continuous operation under the most rigorous conditions. Supplied as a semi and fully automatic model, it is also produced in four tensioning levels. It is recommended to use the tool in suspended mode. |
| Strap qualities | Regular duty steel strap (Uniflex) up to 850 N/mm2 High tensile steel strap (Ultraflex) up to 1100 N/mm2 |
| Strap dimensions | 12.7 - 25.0 x 0.50 - 1.00 mm |
| Weights | 17.4 and 18.4 kg (with suspension bracket) |
| Strap tensions | 4500 N, 6500 N, 7500 N, 9500 N |
| Models | Single button = fully automatic Two-button = semi-automatic |
Koel Nagar, Rourkela, Odisha 