We are amongst the best Subland Drill manufacturer and supplier in the country at a very competitive rate. These precision-constructed & custom Subland Drill range gives the benefit of two drills at a time and eases a lot of works at industrial level.Basically subland drill is two drills of different diameters that have been combined into one tool but they retain the individual characteristics and geometric properties of each other. The separate and independent flutes and margins of the subland drill ensure that their sizes and concentration between diameters is maintained throughout the life of the tool and are never affected by re-sharpening the point or step angles.

In order to achieve highly efficient drilling function use our custom & robust designed Coolant Fed Drill. These precision industrial tools enable cost reduction availing superior functionality at such a lower rate.

Industrial Coolant Fed Drill

Coolant fed drill is designed to give outstanding accuracy and to achieve better efficiency and cost reduction. Coolant feed drill has longer and stronger blades and their wave edges are best suited for chip mounting. They also provide excellence to the strength of the insert and are available for re-cutting, if necessary.

Description:

Our coolant feed drill is made from a special alloy cast iron that shows high temperature strength. Their surfaces are specially treated for resistance towards corrosion and abrasion. And as the lubricating ability of the flute is good, chip is eliminated very easily.

Application:

they are used for drilling into steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous heavy metal, non-ferrous light metal, and abrasive plastic.

Insert replacement caution:

After usage, clean the holder and insert the flute using an air gun before mounting a new insert.

• Avoid the drill from being exposed to any shock.
• The performance of the drill varies between 20-40% according to the methods used for re-cutting. If the drill is not re-coated, the performance of the drill will deteriorate that can cause chipping and damage. (for better performance, we recommend our re-cutting and re-coating techniques activities)
• While doing re-cutting work, it is required to make the surface rough where cutting edge should be less than 1. 5s, and the height between both the blades should be within 0. 02mm.

How to use:

• Remove the clamp screw when replacing the insert.
• Mount the insert when turning it towards right and turn left after adjusting the inserts mark point to be in the direction of the screw head.
• Tighten the screw while pressing the end of the insert with fingers.

We are amongst the best Subland Drill manufacturer and supplier in the country at a very competitive rate. These precision-constructed & custom Subland Drill range gives the benefit of two drills at a time and eases a lot of works at industrial level.

Industrial Subland Drill

Basically subland drill is two drills of different diameters that have been combined into one tool but they retain the individual characteristics and geometric properties of each other. The separate and independent flutes and margins of the subland drill ensure that their sizes and concentration between diameters is maintained throughout the life of the tool and are never affected by re-sharpening the point or step angles.

Applications:

The subland drill eliminates secondary operations by drilling multi-diameter holes in one production pass. On certain applications particularly while making holes in steel or cast iron, the subland drill gives superior tool life as compared to other basic step drill of the same diameter. When drill bushing is applied and the material is being cut through, with subland drill Double Margins can be supplied at no extra cost. As a result the additional margins will give maximum support and guidance that will give more accurate size and hole location control.

Available in:

• High Speed Steel
• Carbide Tipped
• Solid Carbide

Our Burnishing Drill range is manufactured using cutting edge technology for various industrial functionality. The superior Burnishing Drill is available at cost-effective price range. So its demand is higher in the industrial tools market.

Industrial Burnishing Drill

We manufacture high quality Burnishing Drill made from superior quality raw material. A burnishing drill includes cylindrical shank and a drill body connected to the shank.
Description of the tool:

• The burnishing drill includes a cylindrical drill body connected at forward integrally with a shank.
• The forward end of the drill body includes the first pair of cutting edges inclined radial and at rear from the forward most central end of the drill body toward the shank at a first cutting angle
• The second pair of cutting edges, which is formed of diamond chips, is disposed in a plane intersecting where the first pair of cutting edges is located, for maximum external margins of the first pair of cutting edges toward the shank at a second cutting angle.

Premium quality Step Drill is provided by our company to facilitate smooth drilling function. Our robust & custom designed Step Drill offer maximum working accuracy and longer life to the tools. These are offered at a best suitable rate.

Industrial Step Drill

In order to impart superior running and drilling function we have developed high precision step drill. Our step drills are known for their enhanced performance & durability in all diverse working conditions. To get good step drills, they are properly hardened and grounded to provide longer life and maximum working accuracy to the tools.

Premium quality Step Drill is provided by our company to facilitate smooth drilling function. Our robust & custom designed Step Drill offer maximum working accuracy and longer life to the tools. These are offered at a best suitable rate.

We are amongst the best Subland Drill manufacturer and supplier in the country at a very competitive rate. These precision-constructed & custom Subland Drill range gives the benefit of two drills at a time and eases a lot of works at industrial level.

Our Burnishing Drill range is manufactured using cutting edge technology for various industrial functionality. The superior Burnishing Drill is available at cost-effective price range. So its demand is higher in the industrial tools market.

We are amongst the best Subland Drill manufacturer and supplier in the country at a very competitive rate. These precision-constructed & custom Subland Drill range gives the benefit of two drills at a time and eases a lot of works at industrial level.Basically subland drill is two drills of different diameters that have been combined into one tool but they retain the individual characteristics and geometric properties of each other. The separate and independent flutes and margins of the subland drill ensure that their sizes and concentration between diameters is maintained throughout the life of the tool and are never affected by re-sharpening the point or step angles.

In order to achieve highly efficient drilling function use our custom & robust designed Coolant Fed Drill. These precision industrial tools enable cost reduction availing superior functionality at such a lower rate.

Industrial Coolant Fed Drill

Coolant fed drill is designed to give outstanding accuracy and to achieve better efficiency and cost reduction. Coolant feed drill has longer and stronger blades and their wave edges are best suited for chip mounting. They also provide excellence to the strength of the insert and are available for re-cutting, if necessary.

Description:

Our coolant feed drill is made from a special alloy cast iron that shows high temperature strength. Their surfaces are specially treated for resistance towards corrosion and abrasion. And as the lubricating ability of the flute is good, chip is eliminated very easily.

Application:

they are used for drilling into steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous heavy metal, non-ferrous light metal, and abrasive plastic.

Insert replacement caution:

After usage, clean the holder and insert the flute using an air gun before mounting a new insert.

• Avoid the drill from being exposed to any shock.
• The performance of the drill varies between 20-40% according to the methods used for re-cutting. If the drill is not re-coated, the performance of the drill will deteriorate that can cause chipping and damage. (for better performance, we recommend our re-cutting and re-coating techniques activities)
• While doing re-cutting work, it is required to make the surface rough where cutting edge should be less than 1. 5s, and the height between both the blades should be within 0. 02mm.

How to use:

• Remove the clamp screw when replacing the insert.
• Mount the insert when turning it towards right and turn left after adjusting the inserts mark point to be in the direction of the screw head.
• Tighten the screw while pressing the end of the insert with fingers.

We are amongst the best Subland Drill manufacturer and supplier in the country at a very competitive rate. These precision-constructed & custom Subland Drill range gives the benefit of two drills at a time and eases a lot of works at industrial level.

Industrial Subland Drill

Basically subland drill is two drills of different diameters that have been combined into one tool but they retain the individual characteristics and geometric properties of each other. The separate and independent flutes and margins of the subland drill ensure that their sizes and concentration between diameters is maintained throughout the life of the tool and are never affected by re-sharpening the point or step angles.

Applications:

The subland drill eliminates secondary operations by drilling multi-diameter holes in one production pass. On certain applications particularly while making holes in steel or cast iron, the subland drill gives superior tool life as compared to other basic step drill of the same diameter. When drill bushing is applied and the material is being cut through, with subland drill Double Margins can be supplied at no extra cost. As a result the additional margins will give maximum support and guidance that will give more accurate size and hole location control.

Available in:

• High Speed Steel
• Carbide Tipped
• Solid Carbide

Our Burnishing Drill range is manufactured using cutting edge technology for various industrial functionality. The superior Burnishing Drill is available at cost-effective price range. So its demand is higher in the industrial tools market.

Industrial Burnishing Drill

We manufacture high quality Burnishing Drill made from superior quality raw material. A burnishing drill includes cylindrical shank and a drill body connected to the shank.
Description of the tool:

• The burnishing drill includes a cylindrical drill body connected at forward integrally with a shank.
• The forward end of the drill body includes the first pair of cutting edges inclined radial and at rear from the forward most central end of the drill body toward the shank at a first cutting angle
• The second pair of cutting edges, which is formed of diamond chips, is disposed in a plane intersecting where the first pair of cutting edges is located, for maximum external margins of the first pair of cutting edges toward the shank at a second cutting angle.

Premium quality Step Drill is provided by our company to facilitate smooth drilling function. Our robust & custom designed Step Drill offer maximum working accuracy and longer life to the tools. These are offered at a best suitable rate.

Industrial Step Drill

In order to impart superior running and drilling function we have developed high precision step drill. Our step drills are known for their enhanced performance & durability in all diverse working conditions. To get good step drills, they are properly hardened and grounded to provide longer life and maximum working accuracy to the tools.

Premium quality Step Drill is provided by our company to facilitate smooth drilling function. Our robust & custom designed Step Drill offer maximum working accuracy and longer life to the tools. These are offered at a best suitable rate.

We are amongst the best Subland Drill manufacturer and supplier in the country at a very competitive rate. These precision-constructed & custom Subland Drill range gives the benefit of two drills at a time and eases a lot of works at industrial level.

Our Burnishing Drill range is manufactured using cutting edge technology for various industrial functionality. The superior Burnishing Drill is available at cost-effective price range. So its demand is higher in the industrial tools market.