Utiliti Controls

Deonar, Mumbai, Maharashtra

We are a prime Manufacturer, Exporter and Supplier of Bimetallic Thermostats. The Bimetallic Thermostat offered by us is safe to use and is of superior quality. We ensure all the raw materials used in the manufacturing of Bimetallic Thermostat are of high quality so as to provide our customers with the best products available in the industry. Bimetallic Thermostats are used in numerous applications. Used in variety of applications these bimetallic thermostats are safe to use and can be customized as per the requirements of the customers. Our Bimetal thermostat products are individually calibrated and tested to meet both thermal and electrical characteristics. The bimetal strip serves as the actuating element in these rugged, precision thermostats. This bimetal thermostat is individually calibrated and tested to meet both thermal and electrical characteristics. The single contact switch arm assembly minimizes failures due to contact contamination, while the silver contacts assure long life and excellent current carrying capacity. The bimetal is used as a temperature response element hence it senses heat and gets difflected. This deflection is used to actuate the switch at a predefined temperature. This thermostat has snap acting switch mechanism. The thermostat resets when the temperature reaches its restart level. Adjusting screw is used to change the actuating temperature. Mounting

• M4 screw

Features

• Adjustable or pre-set fixed temperature models
• Easy mounting with a single screw
• Narrow differential temperature
• Constient temperature VS Anle correlation
• Good heat transfer to Bimetal
• Customer design spindle and terminal for Bulk Orders

Applications

• Heater Fans
• Dry and Steam Irons
• Countertop Cooking Appliances
• Laminating Equipment
• Water heaters
• Air-Flow Sensing Applications

Specifications

We can develop any customized design of Themostat for bulk orders.

We are a prominent Manufacturer, Supplier and Exporter of Slim Thermostat (SN-4). Because of its Slim Design Slim Thermostat (SN-4) can be easily mounted on places where less space is required. The Slim series of bimetal temperature controls offers proven reliability in a compact, versatile, cost-effective design. The snap-action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 4 amps at 230VAC (100, 000 cycles). The quality, reliability, affordability, versatility of the Slim Series makes it the thermostat of choice for a wide variety of temperature control applications. SN-4 of Utiliti controls is a product which is the slimest of disc thermostats. It is just 4 mm thick. It is just 18.2mm X 12.4 mm in size. 100% factory inspected for continuity, function and contact resistance PPS( polyproplene sulphide) base provides: low cost, high temperature capability, clean processing, high impact strength, low static generation. Features

• Snap action disc
• High thermal sensitivity
• Low cost
• Long contact life
• Compact, slim design

Applications

• Electrical Heating Pads
• Electrical Blankets
• Wax Heaters
• Food Warmers
• Milk Bottle Warmers
• Heat sink protection
• Other Small Appliances

Rating

• Maximum Voltage : 230VAC
• Max Current( For non-inductive loads) : 4A
• Max Temp : 160 Deg C
• Max operating cycles : 1, 00, 000

We also provide this model for inductive loads for bulk orders Characteristics

• Dielectric Strength : 1500 VAC, rms, 60 cycles for 1 minute, terminal to case
• Ambient Temperature Range : 50^oC to 160^oC
• Differential : 10 deg, 15 deg, 20 deg

Configurations

• SN-4 comes in a standard M0 cover made up of stainless steel

TerminalsThe SN-4 comes with a stanndard terminal which can crimped to a wire.

• S : Standard terminal
• N : Flat type terminals

Terminal direction The standard terminal can be riveted in two ways.

• N : terminal flanges at the top
• R : Terminal flanges at the bottom

Selection Code

• SN-4/NC(8)/110(3)/100(5)/S(N)

Temperature setting can be given as per requirement

We are one of the foremost Manufacturer, Exporter and Supplier of Miniature Thermostat (SN-9). The Miniature Thermostat (SN-9) provides high speed contact separation resulting in outstanding life cycle characteristics at electrical loads up to 8 amps. The Miniature Thermostat (SN-9) offered by us are well known for their reliability, compact size, versatile and cost effective design. SN-9 of Utiliti controls is a product which is the smallest of disc thermostats. It is just 5mm X 14.5 mm in size. 100% factory inspected for continuity, function and contact resistance. PPS( polyproplene sulphide) base provides: low cost, high temperature capability, clean processing, high impact strength. Designed for single- and threeâphase motors. Protects against overheating on all running conditions including: running overloads, increased ambient temperature, blocked motor ventilation, line voltage fluctuation, locked rotor, short circuit conditions etc. Motor ProtectionAs a motor winding thermostat, the SN-9 can be mounted conveniently on the end turns of the motor windings. The small size and variety of available brackets afford flexibility in the method of attaching the thermostat. The hermetic construction allows the thermostat to withstand dipping and baking operations on the windings.  Automatic and Manual ResetAutomatic or manual reset systems may be obtained using these thermostats with either manual or automatic type motor starters. When more than one motor winding thermostat is used, they should be connected in series so that the opening of any one thermostat will actuate the controller and shut down the motor. Features

• Small in size
• High current carrying capacity of 10A at 230V
• Resistant to shocks and vibrations
• Snap action disc
• High thermal sensitivity
• Low cost
• Long contact life
• Compact, slim design
• Available with / without mounting bracket

Applications

• Electrical Heating Pads
• Electrical Blankets
• Wax Heaters
• Food Warmers
• Milk Bottle Warmers
• Heat sink protection
• Other Small Appliances
• Water Temperature Control
• Battery Packs
• Medical Equipment
• Dental Equipment

  Rating

• Maximum Voltage : 230VAC
• Max Current( For non-inductive loads) : 8A
• Max Temp : 160 Deg C
• Max operating cycles : 1, 00, 000

We also provide this model for inductive loads for bulk orders. Characteristics

• Dielectric Strength : 1500 VAC, rms, 60 cycles for 1 minute, terminal to case
• Ambient Temperature Range : 10 Deg, 15 Deg, 20 Deg, 50^oC to 160^oC
• Differential : 15 Deg, 20 Deg, 40 Deg
• Contact Resistance : 1250 VAC, rms, 60 cycles for 1 minute, terminal to case, per MIL-STD-202, Method 301
• Dielectric Strength : 5â2000 Hz, 20G, per MIL-STD-202, Method 204 Condition D (unmonitored) (For high vibration applications, refer to the M1)
• Vibration Resistance : 100G, 6 milliseconds, per MIL-STD-202, Method 213
• Shock Resistance

Configurations

• SN-9 comes in a standard M0 cover made up of aluminium

Mounting Style

• M0 : Without bracket
• P : PPS Bracket for surface mounting
• B : Mild steel Bracket
• T : Teflon wire crimped

Terminals

• The SN-9 comes with a stanndard terminal which can crimped to a wire
• S : Standard terminal

Selection Code

• SN-9/NC(8)/110(3)/100(5)/S/M0/T/70

Temperature setting can be given as per requirement