Our Products
Technical Specifications
Model | 600VA to 2KVA |
---|---|
Input Range | 145V to 280V |
Output Voltage | 220V± 10%( in Mains Mode) 20V± 2%( in Inverter Mode) |
Output frequency | 50Hz ±0.1 |
Input frequency | 50Hz ± 10% |
Out put wave form | Quasi Sine Wave |
Inverter efficiency | >90% |
Power factor | 0.6-1 |
Audible alarm | On battery mode, buzzer rings every 4 seconds Insufficient battery capacity, buzzer rings every 1 sec. |
Transfer time | < 8 milli sec |
Response time | 8-12 milli sec |
Protections | Overload, Short-circuit, Overcharge, low |
Technical Specifications
Capacity | 1-5, 5-7.5, 10-50 above 50 |
---|---|
Technology | PWM IGBT Technology |
Dc Bus Voltage | 72/120/180360/432 v |
Input Voltage | 230+20% |
FOR SINGLE PHASE | 415+20% for three phase |
Input Frequency | 50 Hz+10% |
Rectifier/Charger | Float cum Boost charger (CV/CC Type) |
Back up Time | Depends upon battery and load connected |
Output Voltage | 230 v+1% AC single phase |
Output Waveform | Pure sin Wave |
Harmonic Distortions | Less than 3% |
Efficiency | >93% for 360v DC & above >90% for 180v DC >85% for 48 vDC/72 VDC |
Power Factor | 0.8 lagging to Unity |
Transient Recovery | Within 3 Cycles |
Audible Noise | Less than 55db at 1 meter upto 10 KVA Less than 60db at 1 meter above 10 KVA |
Ambient Temperature | Operating :0-50 degree C |
Storage | 0-60 degree C |
Relative Humidity | 95% Maximum (Non condensing) |
Battery | Overcharge, Over discharge, les |