Usha Tecnopower Pvt. Ltd.

Vikas Marg, Delhi

• IS 5553 - 1990

• Output up to 100 KVAR

• Filter factor 5.67 %, 7%, 14 %

• Rated Voltage - 440 V, 525 V, 690 V

• Tuned & Detuned, aluminum / Copper wound- iron core dry type.

• Limiting inrush current during switching

• Limitimg resonance and protection of capacitor banks

• Harmonic banks

• Harmonic filteration

• Low losses & low noise level

• For Triplen and Non-Triplen Harmonic suppression though PF Capacitors.

• Operating ambient temperature -10 to +50 Deg C

• Storage temperature -10 to +75 Deg C

• Supply frequency: 47Hz to 53Hz

• Current : Continuous RMS value: 150% of the rated current

• For harmonic loads 525 V capacitors with series reactor are recommened, which also are avaiable in stock.

• Micro controller based DSP logic for measurements

• All measurements with Class 1 accuracy

• Input sensing either through line-to-line voltage with a CT or individual phase with a CT

• Programmable external PT ratio for HT sensing

• Voltage, Load I, Cap I THD measurement

• Various modes of Programming step kvar, Unequal, binary, un-equal, C-series, E-series

• RS232 OR RS485 port with TAS/MODBUS/GSM protocol in front facia for data-downloading / MODBUS connectivity / GSM connectivity

• Protections provided: - Over/Under Voltage, Over/Under Load, Over/Under Cap. Current/THD, Load Unbalance, over temperature, Out-of-Steps indication

Cast resin insulation technology is sometimes necessary for medium voltage (MV) reactors, vacuum pressure impregnation (VPI) technology for the common medium- and low voltage applications. Dry-type reactors are fundamental components in the power quality management, losses reduction, cost alignment and signal shaping could be translated in an overall cost reduction for the equipped applications.

• wide range of power ratings, from 1 kVAr to several MVAr

• single-phase or three-phase

• for voltages up to 36 kV

• special designs for high frequency applications (up to 25 kHz)

• with different types of cooling: AN (air natural), AF (air forced) or WF (water forced)

• with any type of enclosure

We provide our clients with an array of high performanceThyristor Switch. These are semi conducting device with 4 layers of alternating n and p material. Our range acts as a switch carrying out the current pulse constantly for as long as they are forward biased. Thyristors broadly find its usage wherever high voltage and current are concerned. These are also used to manage alternating currents to change its polarity that causes automatic switch off of the device.

• High Voltage and Ampere ratings

• Unidirectional and Bidirectional transient voltage protection

• Automatically triggered "off" for specied periods of time

• RoHS compliant

• Glass-passivated junctions

• High voltage capability up to 1000 V

• High surge capability up to 950V

• Home appliances - lighting, heating, temperature control, alarm activation, fan speed

• Electrical tools - for controlled actions such as motor speed, stapling event, battery charging

• Outdoor equipment - water sprinklers, gas engine ignition, electronic displays, area lighting, sports equipment, physical fitnes

Made up of 14/16 SWG CRCA material semi bolted structure our PCC Panel is firmly supported. We are the leading Manufacturers and Suppliers of PCC Panel which ensures desired breaking capacities, temperature rise & IP protection. It has enough Space for incoming & outgoing Cable termination. Outgoing terminals are stud type as standard practice. All starters are Type Two Coordinated. Cable Alley Illumination Lamp, Space Heaters and CT terminals with Thermostats are standard features of our Panel boards

• Sufficient space for cable termination

• Provision of Louvers, Space Heaters, Lamp & Socket is mandatory in Cable alley

• Busbar support of reputed make or Epoxy base fiber glass

our organization is well known as a leading manufacturer and supplier of PDB Panel. These panels are applied in batteries, electrical metering equipments, transformers and motor control centers. Our expert personnel team manufactures these panels using the quality grade materials and components soured from the reliable vendors. We check the PDB Panel on safety and quality parameters before offering to the clients at reasonable price.

• Sturdy construction

• Cost-effective

• Easy-to-maintain

• User friendly

We manufacture high quality H.T panels, which are highly durable and efficient due to the best quality raw materials used in manufacturing them. Our HT power panels are designed using Vacuum Circuit Breakers and Oil Circuit Breakers with all safety features like Over-Current, Earth Faults and Transformer Protections. The systems are designed to isolate different parts of the plant during faults without damaging the switch gears.

• Controls the timing of electric appliances

• Earth fault protection

• Highly durable

• Transformer protection

• Designed to isolate different parts of the plant during faults

• To handle required power using to feed different loads

• User friendly

• Power looms

• Industries

• Steel plants

We specialize in sourcing and supplying a precision engineered range of Motor Control Panels. Manufactured using premium grade raw material and components at trusted vendors' premises, these panels are offered in different forms in accordance with the varied specifications detailed by the patrons. Further, to gain trust and confidence of the clients, we offer third party verifications of the range.

• Low power consumption

• Reliability

• Highly durable

Busduct designs are most important as busduct have much less volume of air dissipation compared to P.C.C. Busduct is an important link to feed power from transformer. L.T. side to the PCC inconer.

• Bus Duct upto 6000A with copper/Aluminium bus bars supported on DMC/SMC support.

• Bus bar with Heat shrinkable Sleeves.

• Indoor/Outdoor Duty, Separate Adapted Earthing at both End with space heaters & Earth bus.

• Non-segregated/segregated /Isolated phase, cross over-chamber, vertical /horizontal

• Bus-duct calculation for designing carrying conductor, heating effects, thermal effects, electro dynamic force, voltage drop

• Skin & proximity effects in the terms of bus-bar reactant

• Low volt product & medium voltage products having insulator support capacity should be 2.5kv & 11kv respectively with high tensile fastener for bus bar joints & copper flexible