Biocoction Manufacturing Pvt. Ltd.

Jessore Road, Kolkata, West Bengal

Work table top:-SS-304, PVC /Matt grit/ Sattin finish, 22 GAUGE

Front door and side covered with UV protected 5 mm Acrylic sheet to protect customer from UV Exposure complete transparent. Permanent magnet tohold

Air flow type: -Horizontal Air flow from the front.

Ergonomic design for versatile usage eases of use, plug & play system.International Standards - UK Complied Certifications – ISO 9001:2015, CE. GMP.Company is under Make in India & MSME Certified with International standard, certified model with duly mentioned brand name .Internal IQ/OQ/PQ Certification.Double wall system, Outer MS- Powder coated and Inner Stainless steel-304. Between two walls are filled with Glass wool insulation.

1.Certifications ISO 9001:2015, CE, GMP, MAKE IN INDIA & MSME

2.Material Of Construction:-Outer Body- CRCA Sheet epoxy Powder coated antibacterial & Antirust effect, 22 gaugeORStainless Steel-304 PVC /Matt grit/ Sattin finish, 22 GAUGE , Work table top: -SS-304, PVC /Matt grit/ Sattin finish, 22 GAUGE. Single piece without any internal joint or welding

3.Front door Counter balanced weight with 5 mm toughened/tempered glassUV protectedto protect customer from UV Exposure complete transparent along with base structure to hold the cabinet & ease of access.

4.Air flow type: -Horizontal Air flow, Air Flow Velocity:- 90 FPM 20%, Inflow Velocity: 0.53 m/s, Down flow Velocity: 0.33 m/s, Statically balanced motor blower Assembly (Heavy Duty), 1440 rpm, hp. Noise of the blower is less than 55 dBA & Very low vibration

5.Filtration Assembly:- Room air is drawn from the bottom of the cabinet through a Pre- Filter, then the air pass through HEPA Filter and spread evenly in the working area providing a constant a stream of clean air flow within the work area, Prefilteris made from Non-Woven Synthetic with HDPE mesh , HEPA Filteris Mini pleat type, with an efficiency rating better than 99.999% , Perforated diffuser screen /shield mesh guardprotect Filters from damage.

6.Front angular 10 degree slope helps reduce fatigue of user.

7.Pressure manometer to track filter pressure & air/gas cock inside the working area

8.Easy removable back/front panel for easy access to electrical fittings and easy removable filter placement for ease of access during service.

9.Wheels: -Mounted on heavy tubular stand with lockable castors with foot rest

10.Electricals fittings & Fixtures: -

Microprocessor based PID Controller UV ON-OFF, UV-Timer, Blower 3 speed control High, Low, Medium, and Display of UV Age. Fluorescent light 20 watt, ??800 lux, with chokes for lighting, UV Light 15 watt, Philips make, Power supply -220-230 V, 50-60 Hz, 5/15 amps power cord, Internal 5 amp electrical connection for usage of several machines in clean air

Details 

• Ergonomic design for versatile usage, ease of use, plug & play system.
• Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions
• International Standards - UK Complied Certifications – ISO 9001:2015, CE. GMP.
• Company is under Make in India & MSME Certified with International standard, certified model with duly mentioned brand name. Internal IQ/OQ/PQ Certification
• Material Of Construction:- Outer Body- CRCA Sheetepoxy Powder coated antibacterial& Antirust effect, 22 gauge ORStainless Steel-304PVC /Matt grit/ Sattin finish, 22 GAUGE
• Work table top:-SS-304, PVC /Matt grit/ Sattin finish, 22 GAUGE
• Front door and side covered with UV – protected 5 mm 
• Acrylic sheet to protect  customer from UV Exposure – complete transparent. Permanent magnet to hold 
• Air flow type: - Horizontal Air flow from the front. 
• Air Flow Velocity:- 90 FPM ±20%, Inflow Velocity: 0.53  m/s, Down flow Velocity: 0.33m/s
• Statically balanced motor blower Assembly (Heavy  Duty), 1440 rpm, ¼ hp. Noise of the  blower is less than 55 dBA& Very low vibration
• Filtration Assembly: - Room air is drawn from the bottom of the cabinet through a  Pre- Filter, then the air pass through HEPA Filter and spread evenly in the working area providing a constant a stream of clean air flow within the work area. 
• Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU – 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable. 
• HEPA Filteris Mini pleat type, made from water-resistant, fire retardant, imported micro-fine glass fiber media; conforms to EU – 14 Grade, with an efficiency rating better than 99.999% for 0.3 μ. These filters are designed to accommodate higher air flow volume.
• Perforated diffuser screen /shield mesh guard protect Filters from damage.
•  Front angular 10 degree slope helps reduce fatigue of user.
• Pressure manometer to track filter pressure & air/gas cock inside the working area
• Top removable panel for easy access to electrical fittings and easy removable filter placement for ease of access during service.
• Wheels: -Mounted on heavy tubular stand with lockable castors.
• Electricals fittings & Fixtures: -
• Microprocessor based PID Controller – UV ON-OFF, UV-Timer, Blower 3 speed control – High, Low, Medium, and Display of UV Age. 
• Fluorescent light – 20 watt, 800 lux, with chokes for lighting
• UV Light – 15 watt, Philips make
• Power supply -220-230 V, 50-60 Hz, 5/15 amps power cord.

Ergonomic design for versatile usage eases of use, plug & play system.International Standards - UK Complied Certifications – ISO 9001:2015, CE. GMP.Company is under Make in India & MSME Certified with International standard, certified model with duly mentioned brand name .Internal IQ/OQ/PQ Certification.

Details :

• Ergonomic design for versatile usage, ease of use, plug & play system.
• Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions
• International Standards - UK Complied Certifications – ISO 9001:2015, CE. GMP.
• Company is under Make in India & MSME Certified with International standard, certified model with duly mentioned brand name.Internal IQ/OQ/PQ Certification.
• Material Of Construction:- Outer Body- CRCA Sheetepoxy Powder coated antibacterial& Antirust effect, 22 gauge ORStainless Steel-304 finish, 22 GAUGE
• Work table top: -SS-304, PVC /Matt grit/ Sattin finish, 22 GAUGE. Single piece without any internal joint or welding
• Front door – Counter balanced weight with 5 mm toughened/tempered glassUV protectedtoprotect customer from UV Exposure –complete transparent along with base structure to hold the cabinet & ease of access.
• Air flow type: - Vertical Air flow from the top.
• Air Flow Velocity:- 90 FPM ±20%, Inflow Velocity: 0.53 m/s, Down flow Velocity: 0.33 m/s
• Statically balanced motor blower Assembly (Heavy Duty), 1440 rpm, ¼ hp. Noise of the blower is less than 55 dBA & Very low vibration
• Front angular 10 degree slope helps reduce fatigue of user.
• Pressure manometer to track filter pressure & air/gas cock inside the working area
• Easy removable back/front panel for easy access to electrical fittings and easy removable filter placement for ease of access during service.
• Wheels: -Mounted on heavy tubular stand with lockable castors with foot rest

Filtration Assembly: -

• Room air is drawn from the top of the cabinet through a Pre- Filter, then the air pass through HEPA Filter and spread evenly in the working area providing a constant a stream of clean air flow within the work area. 
• Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU – 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable. 
• HEPA Filteris Mini pleat type, made from water-resistant, fire retardant, imported micro-fine glass fiber media; conforms to EU – 14 Grade, with an efficiency rating better than 99.999% for 0.3 μ. These filters are designed to accommodate higher air flow volume.
• Perforated diffuser screen /shield mesh guard protect Filters from damage.

Electricals fittings & Fixtures: -

• Microprocessor based PID Controller – UV ON-OFF, UV-Timer, Blower 3 speed control – High, Low, Medium, and Display of UV Age. 
• Fluorescent light – 20 watt, 800 lux, with chokes for lighting
• UV Light – 15 watt, Philips make
• Power supply -220-230 V, 50-60 Hz, 5/15 amps power cord.
• Internal 5 amp electrical connection for usage of several machines in clean air

PCR WORKSTATION, Model: - PCRW, Make: - UR Biocoction

Room air is drawn from the top of the cabinet through a Pre- Filter, then the air pass through HEPA Filter and spread evenly in the working area providing a constant a stream of clean air flow within the work area. Re circulates 70% of HEPA filtered air and rest 30% exhausted through a HEPA filter and discharged to the lab or exhausted through an optional exhaust system, HEPA-filtered exhaust air re circulated into the room , HEPA-filtered down-flow air is a portion of mixed down-flow and inflow air from a common plenum, Negative Pressure air surrounding all biological contaminated ducts and plenums, Negative pressure surrounds the work area with double wall plenums for protection, High velocity air forced through HEPA filters, Filtered air is thrown in the chamber through nozzles with a high velocity which in turn disperse particulate matter on all surface, The lower portion of the Air showers suck the contaminated air and allow it to pass to blower supply plenum , This process is a continuous process in which air is continuously filtered and re circulated inside the chamber without any exchange with the external environment.

Certifications ISO 9001:2015, CE, GMP, Make in India & MSME

Room air is drawn from the top of the cabinet through a Pre- Filter, then the air pass through HEPA Filter and spread evenly in the working area providing a constant a stream of clean air flow within the work area.

Material Of Construction:-Outer Body- CRCA Sheet epoxy Powder coated antibacterial & Antirust effect, 22 gauge/ORStainless Steel-304 PVC /Matt grit/ Sattin finish, 22 GAUGEwith 3 sided Acrylic/Polycarbonate sheet 5 mm thickness with UV Protection

Work table top: -SS-304, PVC /Matt grit/ Sattin finish, 22 GAUGE. Single piece without any internal joint or welding-

Front door and side covered withUV protected5 mm Acrylic sheet to protect customer from UV Exposure complete transparent. Permanent magnet to hold

Air flow type: -Vertical Air flow from the top, Air Flow Velocity:- 90 FPM 20%, Inflow Velocity: 0.53 m/s, Down flow Velocity: 0.33 m/s, Statically balanced motor blower Assembly (Heavy Duty), 1440 rpm, hp. Noise of the blower is less than 55 dBA & Very low vibration

Prefilteris made from Non-Woven Synthetic with HDPE mesh, HEPA Filteris Mini pleat type , with an efficiency rating better than 99.999% for 0.3 . , Perforated diffuser screen /shield mesh guardprotect Filters from damage.

Front angular 10 degree slope helps reduce fatigue of user.

Built in Pipette Holder in the working area.

Pressure manometer to track filter pressure & air/gas cock inside the working area

Wheels: -Mounted on heavy tubular stand with lockable castors with foot rest

Electricals fittings & Fixtures: -

Microprocessor based PID Controller UV ON-OFF, UV-Timer, Blower 3 speed control High, Low, Medium, and Display of UV Age.

Fluorescent light 20 watt, ??800 lux, with chokes for lighting, UV Light 15 watt, Philips make, Internal 5 amp electrical connection for usage of several machines in clean air

Power supply -220-230 V, 50-60 Hz, 5/15 amps power cord.

Ergonomic design for versatile usage eases of use, plug & play system.International Standards - UK Complied Certifications – ISO 9001:2015, CE. GMP.Company is under Make in India & MSME Certified with International standard, certified model with duly mentioned brand name .Internal IQ/OQ/PQ Certification.Double wall system, Outer MS- Powder coated and Inner Stainless steel-304. Between two walls are filled with Glass wool insulation.