GST : 09AAAFU2219D1ZJ
Verified
Write a Review
Our Products
ENVIRONMENTAL TESTING EQUIPMENTS
1 Products availableOne of the most critical aspects of paper making is pulp quality. The instruments that comprise this section of the catalogue are designed specifically for the analysis of different raw materials. The selection and specimen preparation to further study of cooking pattern and good quality pulp are produced in laboratory scale. These instruments are More..
This instrument is used for wet grinding and de-fibrating chips or experimental pulp making. Utilized for developing pulping processes and strength development studies on raw, steamed or chemically cooked chips, fully cooked pulp, cooked straw, waste paper and many other materials.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code | UEC-2019 |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Dimension | 60” x 32” x 40” |
| Applicable Standards | TAPPI T 240 om-02 |
| Testing Applications | Pulp Testing Raw Material Wood Fibre (Disc Refiner) |
The Universal’s wet strength tester is used for measuring the initial wet strength & elongation. This instrument is used for measuring the maximum tensile force per unit width that a wet test piece, made from a pulp under specified conditions, will stand before breaking in a tensile test. It measures the initial wet web strength and elongation of newsprint strip or pulp.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code | UEC-2001 |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Dimension | 12” x 16” x 20” |
| Applicable Standards | TAPPI T 240 om-02 |
| Testing Applications | Newsprint (Wet Strength) |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code | UEC-2002 A |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Applicable Standards | SCAN C19:65, M4:65, ISO 5267/1, MERKBLATT V7/61, APPITA P 205 |
| Testing Applications | Pulp Testing Raw Material Recycled Fibre (Freeness) Pulp Testing Raw Material Agro Fibre (Freeness) Pulp Testing Raw Material Wood Fibre (Freeness) |
UEC-2002 BBEATING & FREENESS TESTER (SR TYPE) (PNEUMATIC LIFTING MODEL)
This instrument is used for determination of refining as freeness of wood fibre, ground wood Mechanical pulp and recycle fibers. It measures the drainage capacity of beaten pulp and checking the progress of beating process. This Model has Pneumatic arrangement which ensures, the constant lifting rate of the Sealing Cone. A Plexiglass Double Graduated measuring cylinder is provided to check the obtained Schopper Riegler value.
A stock dilution of 2 Grams/Ltr. is poured into the cylindric container fitted with Standard wire mesh screen. After 5 seconds the sealing cone is lifted through the Pneumatically controlled Lever and due to the acceleration, the water contained in the stock is drained through the wire mesh screen which passes through the bottom & side orifics. The Water collected in the Graduated Cylinder through the side Orific, reads the measure ( in SR ) of the draining capacity of the sample. The equipment is intended for long fibered pulps that produce a dense fibre mat on the screen.
Applicable Standards : SCAN C19:65, M4:65, ISO 5267/1, MERKBLATT V7/61, APPITA P 205
DimensionS : 45.5 cm. x 25.5 cm. x 122.5 cm.
Weight : 17.70 Kgs
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code | UEC-2002 B |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Testing Applications | Pulp Testing Raw Material Recycled Fibre (Freeness) Pulp Testing Raw Material Agro Fibre (Freeness) Pulp Testing Raw Material Wood Fibre (Freeness) |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code | UEC-2003 |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Applicable Standards | ISO 5267/2, CPPA C1, BS 6035/2, TAPPI T 227 |
Consistency determination apparatus for quick determination of pulp/stock consistency. The measured stock is poured on to the grid plate of the equipment and drained under suction. The filtration is repeated until the filtrate becomes perfectly clear. After drying and weight of the sheet the consistency can be determined.
Optional : Vacuum pump Rapid Sheet Drier for shortening the drying time, as an optional accessory Couch Plate.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code | UEC-2004 |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Weight | 37 Kg |
| Dimension | 82 x 41 x 56 cm. |
| Applicable Standards | TAPPI T 240 om-02 |
| Testing Applications | Pulp Testing Raw Material Recycled Fibre (Consistency) Pulp Testing Raw Material Agro Fibre (Consistency) Pulp Testing Raw Material Wood Fibre (Consistency) |
Hand Sheet former (Model TAPPI Type) for production of laboratory paper sheets for physical tests. The design of the drainage system provides a uniform flow across the entire wire, thus permitting exceptionally uniform sheets. Laboratory sheets, prepared from suspensions of pulp are used for determining physical properties such as apparent density, tensile index, tear index, folding endurance light scattering coefficient and air resistance. The conditions of sheet making should be similar to commercial production. Hand Sheet former for production of circular sheets.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code | UEC-2005 A |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Weight | 93 Kg |
| Dimension | 150 x 44 x 61 cm. |
| Applicable Standards | TAPPI T-205, T-221 & ISO 5269-1 |
| Testing Applications | Pulp Testing Raw Material Recycled Fibre (Sheet Making) Pulp Testing Raw Material Agro Fibre (Sheet Making) Pulp Testing Raw Material Wood Fibre (Sheet Making) |
For production of laboratory paper sheets for physical tests. The design of the drainage system provides a uniform flow across the entire wire, thus permitting exceptionally uniform sheets. Laboratory sheets, prepared from suspensions of pulp are used for determining physical properties such as apparent density, tensile index, tear index, folding endurance light scattering coefficient and air resistance. The conditions of sheet making should be similar to commercial production. Hand Sheet former (Model SCA Type) for production of circular sheets.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code & Name | UEC-2005 B Hand Sheet Former (SCA Type) |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Weight | 110 Kg |
| Dimension | 130 x 61 x 64 cm. |
| Applicable Standards | TAPPI T-205, ISO 5269/1, CPPA C.4, SCAN C26, DIN 54358, APPITA P 203 |
| Testing Applications | Pulp Testing Raw Material Recycled Fibre (Sheet Making) Pulp Testing Raw Material Agro Fibre (Sheet Making) Pulp Testing Raw Material Wood Fibre (Sheet Making) |
For production of laboratory paper sheets for physical tests. The design of the drainage system provides a uniform flow across the entire wire, thus permitting exceptionally uniform sheets. Laboratory sheets, prepared from suspenstions of pulp are used for determining physical properties such as apparent density, tensile index, tear index, folding endurance light scattering coefficient and air resistance. The conditions of sheet making should be similar to commercial production. Hand Sheet former (Model KCL Type) For production of Square Sheets.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code & Name | UEC-2005 C Hand Sheet Former (KCL Type) |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Dimension | 17” x 17” x 32 ” |
| Applicable Standards | SCAN C 26M5 |
| Testing Applications | Pulp Testing Raw Material Recycled Fibre (Sheet Making) Pulp Testing Raw Material Agro Fibre (Sheet Making) Pulp Testing Raw Material Wood Fibre (Sheet Making) |
Semi-Automated Sheet Former Touch screen controlled with White Water Re-Circulation System, Pneumatic Sheet Press & Rapid Dryer mounted on a base table complete with accessories. The apparatus is equipped with automatic regulation of filling of water, air agitation, settling & drainage.
The couching pressure is adjusted by pressure regulator & timer. Fresh water or tank water supplied through pneumatic control valves which shut off automatically after reached to correct level. Stock is than added and agitated by air ring channel of the stock containers, settling and drainage action states automatically. The new cycle start after completion of one by pressing the start button on touch panel . The Provision for manual control of all parameters is also provided.
Suitable for producing sheet size :
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code & Name | UEC-2005 E Hand Sheet Former (Semi- Automatic Sheet Former) |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Weight | 425 Kg |
| Dimension | 222 x 102 x 160 cm. |
| Applicable Standards | (TAPPI TYPE) - TAPPI T-205, T-221 & ISO 5269-1, (SCA TYPE)- TAPPI T-205, ISO 5269/1, CPPA C.4, SCAN C26, DIN 54358, APPITA P 203 |
| Testing Applications | Pulp Testing Raw Material Recycled Fibre (Sheet Making) Pulp Testing Raw Material Agro Fibre (Sheet Making) Pulp Testing Raw Material Wood Fibre (Sheet Making) |
This instrument is used for pressing and de-watering the sheet quickly made on sheet making machine. Hydraulic Type Manually Operated and plunger type pump is employed for raising the pressure gradually. Working pressure 3.5 kg/cm2
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code & Name | UEC-2006 A Laboratory Sheet Press - Circular Type (Hydraulic Controlled) |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Weight | 50 Kg |
| Dimension | 80 x 61 x 50 cm. |
| Applicable Standards | SCAN C 26:76, M 5:76, TAPPI T205 OM88, CPPA C.4, ISO 5269/1 |
Sheet Press provided with two adjustable timers i.e.12 & 6 minutes for pressing of two sequential de-watering of sheets. Working pressure 3.5 kg/cm2, Standard Model sheet size dia 165 mm.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code & Name | UEC-2007 B Laboratory Sheet Press – Square Type (Pneumatic Controlled) |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Weight | 50 Kg |
| Dimension | 92 x 62 x 62 cm. |
| Applicable Standards | SCAN C 26:76, M 5:76, TAPPI T205 OM88, CPPA C.4, ISO 5269/1 |
| Testing Applications | Pulp Testing Raw Material Recycled Fibre (Sheet Press) |
Suitable for other sizes: 200 x 200, A4 size
SCAN C 26:76, M 5:76, TAPPI T205 OM88, CPPA C.4, ISO 5269/1
Pulp Testing Raw Material Recycled Fibre (Sheet Press)
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code & Name | UEC-2007 C Laboratory Sheet Press- Square Type (Pneumatic Controlled) |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Weight | 136 Kg |
| Dimension | 43 x 38 x 43 |
| Applicable Standards | SCAN C 26:76, M 5:76, TAPPI T205 OM88, CPPA C.4, ISO 5269/1 |
| Testing Applications | Pulp Testing Raw Material Recycled Fibre (Sheet Press) |
This instrument is used for standardized disintegration of pulp to a homogeneous suspension required for preparation of laboratory hand sheet and other purpose. Pivoted drive unit with stainless steel propeller and shaft. The propeller is driven by electric motor via stepped timing belt, which ensures a direct drive without slippage.
Option :
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Details
| Product Code | UEC-2008 |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Weight | 40 Kg |
| Dimension | 64 x 38 x 60 cm. |
| Applicable Standards | SCAN C 18:65, M2, TAPPI T205 OM-88, CPPA C.6, ISO 5263, APPITA/AS 1301.215s-89 |
This instrument is used for shortening the drying time of wet pulp or paper samples before determining the dry weight or moisture content. It is provided with flat heating elements.Stainless steel sheet fabrications with insulating material ensure long service life.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code | UEC-2009 |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Weight | 17.5 Kg |
| Dimension | 52 x 46 x 33 cm. |
| Applicable Standards | SCAN M- 1 |
| Testing Applications | Pulp Testing Raw Material Recycled Fibre (Sheet Dryer) |
This instrument is used for drying the lab pulp hand sheets or paper samples as per commercial production in laboratory. The process helps to prevent wrinkling and shrinkage in the dried samples. It also permits convenient and rapid insertion of the sheets Since the cloth is mounted in a practical reeling device.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : VARY UPON LOCATION
Details
| Product Code | UEC-2010 |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Weight | 105 Kg |
| Dimension | 94 x 94 x 102 cm. |
| Applicable Standards | SCAN C 26/M5 |
The Drying Cabinet is used for faster drying and conditioning the hand sheets after pressing. The hot air passes through the holes in the drying ring to dry without effecting the surface or Brightness of the hand sheets.
The Design is in accordance with the Technical Section of British Paper & Board Industry. The chamber with heating unit and digital temperature controller to adjust the temperature inside the chamber.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code | UEC-2011 |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Dimension | 24” x 16” x 15” |
Chip Classifier used for rapid, reproducible and accurate classification of wood chips in respect to size and thickness by using standard sized screening trays mounted on a shaking mechanism with specified frequency.
A weighted quantity of the sample is placed in the upper screening tray with chips and fractionated through series of screens each having holes of different diameters and through a slotted screen.
The structure is shaken in horizontal plain with specified frequency. The fractionated chips collected from each screen are weighted and the contents from each screen can be calculated in percentage.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code | UEC-2013 |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Dimension | 45” x 27” x 32” |
| Applicable Standards | TAPPI UM 21, SCAN CM 40 |
| Testing Applications | Pulp Testing Raw Material Wood Fibre (Chips Classification) |
Lab Crusher is used for preparation of wood meal from the samples of different woods used for chemical analysis and grinding virtually to produce a finely meshed sample.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code | UEC-2014 |
|---|---|
| Equipment Category | Pulp Testing Equipments |
| Dimension | 18” x 18” x 10” |
The Digester is a complete pulping unit for producing pulps by cooking the wood chips in a manner similar to a commercial digester. The unit is easy to operate and features precise Temperature control of pulping variables to ensure good repeatability of the results. Microprocessor based temperature indicator cum controller with facility of more detailed pre-programming to control the boiling sequence. A sampling line with cooling attachments allows liquor samples to be withdrawn safely during the cooking process and a control valve determines the circulation rate of cooking chemicals.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
| Product Code | UEC-2016 |
|---|---|
| Equipment Category | Pulp Testing Equipments |
This instrument is used for uniform beating of pulp under standard conditions to determine the behavior of pulp when subject to definite beating schedule.
This beater is suitable for processing pulp samples prior to forming hand sheets in the Lab.
The Tub has capacity of 23 liters suitable for 360 grams O.D. pulp at 2 to 2.5% concentration.
The beaten pulp is a standard specimen for the testing of the physical properties of pulp.
TAPPI T 200m, T 205m, ISO 5246-1, SCAN C 25, CPPAC.2
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
DETAILS
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
DETAILS
Pulp Testing Raw Material Agro Fibre (Cooking)
Pulp Testing Raw Material Wood Fibre (Cooking)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
Pulp Testing Raw Material Agro Fibre (Beating)
Pulp Testing Raw Material Wood Fibre (Beating)
APPITA/AS P209 rp-82, CPPA C.7, ISO 5264/2-1979 SCAN C24:67, TAPPI T248 CM – 74
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
APPITA/AS P209 rp-82, CPPA C.7, ISO 5264/2-1979 SCAN C24:67, TAPPI T248 CM–74
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
Pulp Testing Raw Material Agro Fibre (Pulping)
Pulp Testing Raw Material Wood Fibre (Pulping)
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
SCAN M 13:83
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Details
Pulp Testing Raw Material Agro Fibre (Fractionation)
Pulp Testing Raw Material Wood Fibre (Fractionation)
TAPPI T275
This instrument is used for studying and comparing fibre materials, for example the effects of beating, surface structure and formation. Has built-in Fresnel lens behind the screens, giving a bright and clear picture. Lighting and the transformer as a variable output voltage outstanding stability and smooth control.
Magnification range 100 x 800
Optional : Photographic attachment and accessories Complete Window based software for image analysis.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : AS PER EXPORTS PACKAGING NORMS
Delivery Time : 2 WEEKS
Mr. M. A. Sabri / Shadab (Universal Engineering Corporation)
Sabri Mills, Ambala Road, Saharanpur, Uttar Pradesh - 247001, India
Share us via
View Contact Number 
