Flexure Testing Machine IS - 516, BS 1881, ASTM C78 Flexural tests of concrete beam have their own importance in concrete Road Constructions as well as Buildings Constructions. Normally concrete beams of sizes 10cm x 10cm x 50cm or 15cm x 15cm x 70cm are tested for flexural strength. Specifications: The unit include a hand operated load frame. The lower platen has two rollers, the distance between which is adjustable. For 150mm x 150mm x 170mm beam, the centre to centre distance between the rollers is 600mm while it is 400mm for beams of size 100mm x 100mm x 500mm. The upper platen has also a pair of rollers whose distance is adjustable. It is 200mm centre to centre, for 150mm x 150mm x 700mm size beam and 133mm for 100mm x 100mm x 500mm size beam. A pressure gauge to indicate load is fixed on the load frame. A small pumping unit is attached to the load frame. Total capacity of the machine is 100KN and a 150mm dia pressure gauge 100KN x 1KN is fitted on the machine. Since this is a hand operated light weight machine, it is useful for field laboratory purposes also.

For testing aggregates for resistance to abrasion. It consists of a disc rotating about a shaft connected to a reduction gear box coupled to a motor. The disc rotates at 28030 revolutions per minute. Under the rotating disc there is a tray with an outlet to facilitate the removal of sand. Two conical hoppers are mounted on a bracket. An arrangement is made to start and stop the flow of sand. Two containers with weights are supplied to keep the specimen pressed against the rotating disc. Suitable for operation on 220 volts, 50 cycles, A.C.supply.

Compression Testing Machine Without Gauge Channel Model, designed to conduct compression and crushing strength tests on Containers , Concrete cubes & cylinders, hollow blocks and various other materials in accordance with Indian and/or International standards.The machine is also suitable for conductin Cold Crushing Strength test on refractory specimens. The machine is electro-hydraulically operated and is capable of accommodating test specimens upto 15 x 15 x 15 CM.

Flexure Testing Machine IS - 516, BS 1881, ASTM C78 Flexural tests of concrete beam have their own importance in concrete Road Constructions as well as Buildings Constructions. Normally concrete beams of sizes 10cm x 10cm x 50cm or 15cm x 15cm x 70cm are tested for flexural strength. Specifications: The unit include a hand operated load frame. The lower platen has two rollers, the distance between which is adjustable. For 150mm x 150mm x 170mm beam, the centre to centre distance between the rollers is 600mm while it is 400mm for beams of size 100mm x 100mm x 500mm. The upper platen has also a pair of rollers whose distance is adjustable. It is 200mm centre to centre, for 150mm x 150mm x 700mm size beam and 133mm for 100mm x 100mm x 500mm size beam. A pressure gauge to indicate load is fixed on the load frame. A small pumping unit is attached to the load frame. Total capacity of the machine is 100KN and a 150mm dia pressure gauge 100KN x 1KN is fitted on the machine. Since this is a hand operated light weight machine, it is useful for field laboratory purposes also.

For testing aggregates for resistance to abrasion. It consists of a disc rotating about a shaft connected to a reduction gear box coupled to a motor. The disc rotates at 28030 revolutions per minute. Under the rotating disc there is a tray with an outlet to facilitate the removal of sand. Two conical hoppers are mounted on a bracket. An arrangement is made to start and stop the flow of sand. Two containers with weights are supplied to keep the specimen pressed against the rotating disc. Suitable for operation on 220 volts, 50 cycles, A.C.supply.

Compression Testing Machine Without Gauge Channel Model, designed to conduct compression and crushing strength tests on Containers , Concrete cubes & cylinders, hollow blocks and various other materials in accordance with Indian and/or International standards.The machine is also suitable for conductin Cold Crushing Strength test on refractory specimens. The machine is electro-hydraulically operated and is capable of accommodating test specimens upto 15 x 15 x 15 CM.