Universal Flowtech Engineers LLP

Raigad, Navi Mumbai, Maharashtra

We are supplying Fire Protection Packages . The most important aspect of Fire Protection package is the reliability of the fire fighting pumping system to ensure adequate water supply at required pressure at emergency conditions.

Offerings

• FM Approved UL Listed Fire Fighting Set
• Standard Fire Fighting Set
• Multi Stage Multi Outlet (M.S.M.O) Fire Fighting Set
• Containerized Fire Fighting Set
• Highlights of KBL Fire Pump Packages
• Diesel engine driven pump-set
• Main fire pump – FM approved / UL listed
• Diesel engine – FM approved / UL listed heat exchanger cooled
• Engine Controller – FM approved / UL listed
• Secondary water – cooling loop
• Space saving solution – Multistage multi outlet pump
• Packaged Fire Pump House
• Jockey pump with controller mounted on separate skid where controller is FM approved or UL listed

Highlights of Fire Pump Packages:

• Diesel engine driven pump set
• Main fire pump – FM approved / UL listed
• Diesel engine – FM approved / UL listed heat exchanger cooled
• Engine Controller – FM approved / UL listed
• Secondary water – cooling loop
• Space saving solution – Multistage multi outlet pump
• Packaged Fire Pump House
• Jockey pump with controller mounted on separate skid where controller is FM approved or UL listed

“SP-M” Series Pumps are single stage, horizontal, centrifugal, non clog, self priming, monobloc pumps. They are used in various marine, industrial, civil construction, mobile machinery and public utilities applications.

Features:

• Can withstand wide voltage fluctuations
• From 180 to 240 Volts for single phase
• From 300 to 440 Volts for three phase
• Efficiency at par with internationally available pumps
• Quick automatic self-priming action
• Designed for automatic air release during priming
• Non-clogging impeller to handle suspended solids
• Models are with ‘B’ class of insulation and IP 44 protection
• Models in three phase A.C. power supply can be supplied with IP-55 protection on request
• Repairs possible without disturbing the pipe connections due to back pull out design (except SP ‘0’M)
• No need for foot valve
• Long life – Due to replaceable wearing parts
• Dynamically balanced rotating parts ensure minimum vibrations
• Easy maintenance and spares availability

Applications:

• Marine : Pumping water from docks, ports, vessels
• Industrial : pumping petroleum products, chemicals, effluents, Sewage, ash -water etc.
• Civil construction : Dewatering foundation, trenches and pits
• Mobile Machinery : Cooling water for marine engines and shovels
• Public utilities : Sewage pumping

These pumps are of multistage and have a modular construction. These are either gland packed or mechanically sealed and can be of either electrical drive or engine drive. These are widely used in air conditioning, boiler feed, petroleum, chemical and process industries and so on.

Features:

• Conforming to DIN 24254
• Flanges to DIN 2501 PN 40
• Channel Multistage, Modular Construction
• Self priming
• Gland Packed / Mechanical Seal
• Electrical Drive / Engine Drive

Applications:

• Petroleum, Chemical and Process Industry
• Air Conditioning
• Boiler Feed
• Domestic
• Ship/Naval Engineering
• Liquid with Gas mixture

These pumps are called Concrete Volute Pumps (CVP) because the casing and suction draft tube is cast in-situ concrete with rotating metallic part. These pumps comprise concrete volute casing, draft tube, grouted embedded, components and rotating assembly. These pumps find applications where large quantity of flow is required to be handled, most suitable for sea water application. Some of the advantages of KBL manufactured CVPs are high reliability, design simplicity, superior operating performance, vibration free equipment and low maintenance cost.

Features:

• High Reliability
• Design Simplicity
• Excellent Corrosion Resistance
• Superior Operating Performance
• Vibration-Free Performance
• Low Submergence
• Low Maintenance Cost

Applications:

• Thermal and Nuclear power plants
• Water supply Pumps
• Irrigation Pumps
• Flood control
• Storm water
• Dry Docks

SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, water carrying gravel and so on.

Features:

• Solid size up to 105 mm
• Back pull-out design
• Gland packed / Mechanical Seal
• 50 Hz / 60 Hz availability
• Also available in vertical execution

Applications:

• Sludge
• Sewage
• Power material slurries
• Sugar factory waste

Canned Motor Pump is a centrifugal pump with hermetically sealed electric motor mounted on single shaft thus eliminating the requirement of mechanical seal or other sealing device. Entire rotating assembly is immersed in the liquid, and motor stator and rotor are isolated from the pumped liquid with corrosion resistant, non-magnetic liner and sleeve. A part of the pumped liquid is by-passed through the motor, for cooling of motor and lubricating the bearing.

Features:

• No seal-no leakage
• No coupling-no alignment and no vibration problem
• No separate lubrication of bearing and no contamination of lubricant
• No antifriction bearings
• Small and compact design resulting in saving in installation space
• Easy maintenance and longer life
• Extremely low noise level
• Absolute safety from risks of fire, explosion and leakage
• Automatic thrust balancing
• Vacuum tight construction prevents air contamination of process liquids

Applications:

• The high reliability of these pumps makes them suitable for pumping of toxic, hazardous liquids, high temperature, high pressure services in nuclear power plant, Lithium
• Bromide circulation in refrigeration plant, Ammonia transfer in fertilizer plants, refineries, chemical and pharmaceutical industries and other process industries for handling toxic, hazardous or expensive fluids.

The IVSCV range of check valves offers optimum solution for back flow prevention in liquid and gas lines. Our special design feature provides a rugged construction, reliable operation and long service life. The valve finds applications in various segments of the process industries covering chemical, petrochemicals, pharma, steel, alumina,   power plants and common utilities.

The design offers a low pressure drop operation, which makes the valve more energy efficient. Pressure sealed bonnet design is incorporated for high pressure applications for reliable sealing. Valve can be provided with a external dashpot arrangement to provide non-slam operation, ideal to prevent water hammer.

Features :

• The product designs are in accordance to ASME B16.34 / BS 1868 / IBR with reliable sealing & sturdy construction to ensure excellent performance.
• Suitable for the horizontal & vertical pipe runs”NON-SLAM” arrangement i.e. Dash Pot arrangement can be provided on request.
• All trim material available as per API 600.
• Pressure sealed bonnet for ASME #900 and above to provide excellent sealing against increased line pressure.
• Full range of Body / Cover / Bonnet & Trim material available.
• Valves are available in flange end & butt weld end connections (other end connections can be provided on request).

P coupled set pumps are single stage, horizontal, centrifugal, non clog, self priming, monobloc pumps. They are used in various marine, industrial, civil construction, mobile machinery and public utilities applications.

Features:

• Self priming and able to handle suspended soft solids
• Flatter efficiency
• Quick automatic self-priming action
• Designed to prevent overloading and motor burning
• Non-clogging impeller to handle suspended soft solids
• Portable when fitted on trolley/trailer
• Impeller is CED coated

Applications:

• Industrial : Pumping petroleum producs, chemical effluents, sewage, ash-water
• Industries for clear water handling at high pressures
• Mobile machinery : Cooling water for marine engines and shovels, de-watering trenches and pits
• Marine : Pumping water from docks, ports, vessels
• Flood relief de-watering from basements, multi storeys, shopping malls, godowns, etc.

SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, water carrying gravel and so on.

Features:

• Solid size up to 105 mm
• Back pull-out design
• Gland packed / Mechanical Seal
• 50 Hz / 60 Hz availability
• Also available in vertical execution

Applications:

• Sludge
• Sewage
• Power material slurries
• Sugar factory waste

Efficient & Dependable for:

• Plating Solution
• Detergent and Soap Solution
• Acids / Alkalies
• Oils
• Chemical effluent
• Inks, Dyes and Paint
• Latex
• Adhesives

Features:

• Self Priming upto 3.5 mtrs.
• Impeller and Seal Opetions
• Handles soft/hard Solids without damage or clogging
• Allows flow to be regulated by varying pump speed

Impeller Options (MOC):

• Neoprene
• Nitrile
• EPDM
• Viton

Seal Options:

• Carbon v/s Ceramic
• Carbon v/s Silicon Carbide
• Silicon Carbide v/s Silicon Carbide

Intervalve check valve models IVC and IVCT are primarily single plate swing check valve with a short pattern wafer body conforming to the API6D and ASME B16.10 face to face dimensions. The valve has a simple but reliable and robust construction. The low inertia disc design enables the valve to open or close with a very low differential pressure which make them ideal for services operating under low differential pressures.

The valve is ideal for pump discharge duties. The eccentric mounted hinge pin in combination with the disc seat guarantees a positive shut off of the returning media.

The short face to face dimensions and low weight allows a simple space saving installation between the mating companion flanges. The valves are suitable for mounting between weld neck or slip on type companion flanges of different standards. The need for flange gaskets during installation is totally eliminated in the case of IVC model due to the in-built face sealing ‘O’ rings provided on the sealing face. Gaskets are recommended while installing IVCT model valves.

Key Features:

• Very low face to face dimensions hence space required for mounting is less than 10% of that conventional valves.
• Very low weight-total weight is only approximately 1/6 the weight of a conventional check valve.
• Short wafer body enables mounting the valve with shorter length fasteners of lesser number compared to flanged swing check valve. Approximately 50% saving in cost of fasteners.
• Considerable secondary advantages resulting in substantial savings in handling, packing, transportation, installation and maintenance.
• Saving in terms of overall length required for piping.
• Tightening torque to be applied on the companion flange bolting is lower due to face sealing O-rings.
• Practically maintenance free due to fewer number of parts and simple construction.
• Self centering in pipeline due to controlled outside diameter, enables easy installation.

The IVDPCV is a spring loaded Dual Plate check valve uniquely designed for applications. The constructional feature makes the valve much smaller in size, lighter in weight & makes it much feasible in operation as compared to conventional swing check valve.

IVDPCV valve employs dual spring loaded plates / disc hinged on a central hinge pin. It operates on the differential pressure between fluid flow pressure & spring torsion pressure. As the flow pressure reduces, the plates tends to close with a cushion effect by spring torsion force thereby restricting the reversal of fluid flow.

Key Features:

• The product designs are in accordance to ASME B16.34 / API 594 with reliable sealing & sturdy construction to ensure excellent performance.
• The constructional feature reflects on the compactness of the valve by smaller volume, shorter length & even lighter weight.
• Suitable for the horizontal & vertical pipe runs.
• These valves can be provided with soft & metal seat.
• Various end connections such as wafer / wafer lugged / double flange.
• Long life & trouble free operation.

We are known in the market amongst reputed and eminent industry for manufacturing, importing, distributing, exporting and supplying a superior quality range of Manual Preparation Poly Pack Unit in Navi Mumbai, Maharashtra, India. These are highly rust-resistant products which are extremely durable as well. These products are supplied to clients at leading market prices within the specified time period.

‘SP’ Series Pumps are of non clog and self priming type. They are used in various marine, industrial, civil construction, mobile machinery and public utilities applications.

Features:

• Efficiency at par with internationally available pumps.
• Quick automatic self-priming action.
• Designed for automatic air release during priming.
• Non-clogging impeller to handle suspended solids.
• Repairs possible without disturbing the pipe connection due to back pull out design (except SP’0′).
• Portable, when fitted on trolley/trailer.
• Suitable for engine / motor.
• No need for foot value.
• Long life – Due to replaceable wearing parts.
• Dynamically balanced rotating parts ensure minimum vibrations.
• Easy maintenance and spares availability.

Applications:

• Marine-Pumping water from docks, ports, vessels.
• Industrial : Petroleum products, chemicals, effluents, sewage, ash-water etc.
• Civil construction : Dewatering foundation, trenches and pits.
• Mobile Machinery : Cooling water for marine engines and shovels.
• Public utilities : Sewage pumping.

The IVGTC range of gate valves incorporates state of the art design features to provide a rugged construction, reliable operation and long life. The valves are suitable for normal services  to most demanding applications covering all segments of the process industries including oil & gas, refineries, petrochemicals, pharma, steel, alumina power plants and common utilities. An ideal valve for the flow isolation and ON / OFF duty.

Our valves can be provided with special features like water sealed gland for vacuum service, bypass arrangements for pressure balancing, special cleaning for oxygen service, multi start spindle for low effort operation, extended spindle / bonnet for pit mounted / low temperature service & NACE compliant materials for sour service in petroleum industries, etc.

The valves can be provided with motor operation wherever required. The high pressure range incorporates a pressure sealed bonnet design for reliable sealing.

Key Features:

• The product designs are in accordance to ANSI B16.34 / API 600 / IBR with reliable sealing & sturdy construction to ensure excellent performance.
• Outside screw & yoke (OS & Y) construction.
• Back Seat arrangement to provide isolation of stuffing box for On-Line serviceability.
• All trim material available as per API 600.
• Pressure sealed bonnet for ASME #900 and above to provide excellent sealing against increased line pressure.
• Fully guided wedge to ensure proper alignment while seating.
• Full range of Body / Bonnet & Trim material.
• Valve Bypass / Deep stuffing box arrangement optionally available.
• Valves are available in Flange End & Butt Weld end connections (other connections can be provided on request).
• Gear / Electrical operator can be provided if required.
• Locking arrangement can be provided with hand wheel / gear operator, if required.
• Position indicator / limit switches for ON-OFF indication provided on request.

The VERTICAL GLANDLESS PUMP in normal hydraulic terms does not differ from any conventional centrifugal pump. The pump is designed in such a way that the liquid which normally try to pass through the point, where the impeller drive shaft enters the back plate (stuffing box) is diverted and returned as a controlled flow to the suction tank. The need for any seal is eliminated by allowing the leakage liquid to escape through the Overflow connection of the Overflow Chamber.

The liquid entering suction flow around the impeller casing and leaves through the delivery under pressure. Between the annular gap of upper rotor casing and impeller some leakage liquid escapes to the Overflow Chamber.

The auxiliary impeller (expeller) prevents the leakage liquid going further up and canalizes it through out – Irt in the Chamber.

Applications:

• Scrubbers
• Filter press
• Ejector systems
• Effluent transfer
• Phosphoric acid plants
• Gas washing plants
• Caustic soda plant

Advantages:

• No shaft sealing arrangement so no maintenance.
• Pump can run dry,
• Effectively handles slurry / sludge.
• The pump suffers no ill effect if the pump discharge valve is partially or fully closed.

Applications:

• Liquids with solids in suspension
• Sludes & pulpy material
• Industrial waste handling
• Liquid containing fibrous & powdered material
• Coal tar
• Effluent

Theses pumps are constructed rigidly to ensure vibration free operation. Hydraulic design is being updated with our continuous R&D efforts to meet requirements of higher efficiency and lower submergence, taking care of other parameters such as, high reliability and optimum system design.

Features:

• Vibration-free performance
• Low submergence
• No priming required
• Dry pit/Wet pit arrangement available
• Direct drive/Right angle gear drive
• Impeller pull-out/Non-pull-out
• Bowl pull-out/Non-pull-out
• Gland packed / Mechanical seal
• 50Hz / 60Hz availability

Applications:

• Water supply Pumps
• Irrigation Pumps
• Cooling tower
• Thermal and Nuclear power plants
• Steel, Cement industries
• Refineries
• Sea water on off-shore platforms
• Condensate extraction
• Fire fighting Pumps
• Flood control
• Dry Docks