RKB is a multistage centrifugal side suction, vertical delivery, horizontal pump with diffuser type casing. Pump shaft is supported in anti-friction bearings. Enclosed impellers are of radial flow type provided with balancing holes. These pumps have standard lubrication of grease and are suitable for coupling with electric motors.

Features:

• Gland Packed / Mechanical Seal
• 50 Hz / 60 Hz availability

Applications:

• Fire-fighting
• Booster Service
• Mine Dewatering
• Boiler feed

These are designed to run direct or through pulley with an engine/motor with a minimal variation in efficiency. Rotating parts are dynamically balanced. These pumps are designed for boiler feed, dewatering in mines, fire fighting applications. Delivery size varies up to 65 mm.

Features:

• Top flat efficiency curve: minimum variation in efficiency in entire operating range.
• Efficiency at par with internationally available
• Designed to run direct / through pulley with engine / motor.
• Designed to prevent overloading of engine / motor.
• Designed for automatic air release during priming.
• Dynamically balanced rotating parts ensure minimum vibrations.
• Replaceable wearing parts and hence longer life.
• Easy maintenance and spares availability.

Kirloskar KSIL, KCIL are vertical multistage centrifugal pumps. The in-line design enables installation of the pump in horizontal one pipe systems. The suction and discharge ports are of same dimension and are in the same horizontal plane. This arrangement insures a compact design and calls for a simpler piping systems.

Features:

• Energy Efficient
• Compact and Aesthetical Design
• Corrosion Resistant
• Reliable Sealing
• Ease of Maintenance
• Durable
• Light Weight
• Low Noise Level

Applications:

• Water Supply
• Industrial Pressure Boosting
• Liquid TransferWater Treatment
• Building Industry
• Dairy
• Irrigation
• Small Power Plants

These are of gland packed with a mechanical seal used mainly in fire fighting, booster service, mine dewatering and so on. These pumps have a delivery size of 250mm.

Features:

• Gland Packed / Mechanical Seal
• 50 Hz / 60 Hz availability

Applications:

• Fire-fighting
• Booster Service
• Mine Dewatering
• Boiler feed

Condensate Extraction Pump series by  Kirloskar Brothers Limited is widely used for condensate extraction application in  thermal and nuclear power plants. High Efficiency and Low NPSHR characteristics make CEP pumps the best suitable in these segments.

Features :

• Vertical Can (Barrel) – type ring-section pump. Suction & stage Impellers are radial flow type design. Pump can be single or multistage. Pump can be either with Single or Double Suction Impeller to have lower NPSHR
• Pumps with axial thrust balancing arrangement.
• Pumps are with antifriction type axial thrust bearings with oil sump lubrication / grease lubrication.
• Pumps are with segmental pad type thrust and plain radial bearings with oil sump lubrication.
• Pumps are with Can (Barrel) for standard pump suction and discharge nozzle with above the ground floor for special arrangement suction nozzle can be below the installation floor as per the site layout.
• Pumps supplied with cardan shaft/flexible tubular shafts as an option.
• Pumps provided with reverse rotation protection device.
• Hydraulic design constantly being updated through our research and development work to meet high efficiency and low NPSHR requirements.

RKB is a multistage centrifugal side suction, vertical delivery, horizontal pump with diffuser type casing. Pump shaft is supported in anti-friction bearings. Enclosed impellers are of radial flow type provided with balancing holes. These pumps have standard lubrication of grease and are suitable for coupling with electric motors.

Features:

• Gland Packed / Mechanical Seal
• 50 Hz / 60 Hz availability

Applications:

• Fire-fighting
• Booster Service
• Mine Dewatering
• Boiler feed

These are designed to run direct or through pulley with an engine/motor with a minimal variation in efficiency. Rotating parts are dynamically balanced. These pumps are designed for boiler feed, dewatering in mines, fire fighting applications. Delivery size varies up to 65 mm.

Features:

• Top flat efficiency curve: minimum variation in efficiency in entire operating range.
• Efficiency at par with internationally available
• Designed to run direct / through pulley with engine / motor.
• Designed to prevent overloading of engine / motor.
• Designed for automatic air release during priming.
• Dynamically balanced rotating parts ensure minimum vibrations.
• Replaceable wearing parts and hence longer life.
• Easy maintenance and spares availability.

Kirloskar KSIL, KCIL are vertical multistage centrifugal pumps. The in-line design enables installation of the pump in horizontal one pipe systems. The suction and discharge ports are of same dimension and are in the same horizontal plane. This arrangement insures a compact design and calls for a simpler piping systems.

Features:

• Energy Efficient
• Compact and Aesthetical Design
• Corrosion Resistant
• Reliable Sealing
• Ease of Maintenance
• Durable
• Light Weight
• Low Noise Level

Applications:

• Water Supply
• Industrial Pressure Boosting
• Liquid TransferWater Treatment
• Building Industry
• Dairy
• Irrigation
• Small Power Plants

These are of gland packed with a mechanical seal used mainly in fire fighting, booster service, mine dewatering and so on. These pumps have a delivery size of 250mm.

Features:

• Gland Packed / Mechanical Seal
• 50 Hz / 60 Hz availability

Applications:

• Fire-fighting
• Booster Service
• Mine Dewatering
• Boiler feed

Condensate Extraction Pump series by  Kirloskar Brothers Limited is widely used for condensate extraction application in  thermal and nuclear power plants. High Efficiency and Low NPSHR characteristics make CEP pumps the best suitable in these segments.

Features :

• Vertical Can (Barrel) – type ring-section pump. Suction & stage Impellers are radial flow type design. Pump can be single or multistage. Pump can be either with Single or Double Suction Impeller to have lower NPSHR
• Pumps with axial thrust balancing arrangement.
• Pumps are with antifriction type axial thrust bearings with oil sump lubrication / grease lubrication.
• Pumps are with segmental pad type thrust and plain radial bearings with oil sump lubrication.
• Pumps are with Can (Barrel) for standard pump suction and discharge nozzle with above the ground floor for special arrangement suction nozzle can be below the installation floor as per the site layout.
• Pumps supplied with cardan shaft/flexible tubular shafts as an option.
• Pumps provided with reverse rotation protection device.
• Hydraulic design constantly being updated through our research and development work to meet high efficiency and low NPSHR requirements.