HT unit: Capacitor units are manufactured in the range of 50KVAr to 1000KVAr & in the voltage range of 1 KV to 22KV. High voltage capacitor banks (3.3Kv to 132KV 220KV) are formed by series parallel combinations of these units & connected in various formations of star double star and delta, depending upon customers requirement applications and applicable protection schemes. We have supplied hundreds of banks of ratings varying between 2-24 MVAr With similar capacitor units. Capacitors are type tested as per IEC ISS (IS-13925) in CRPI (Govt of India), accredited by NABL Laboratory.

High voltage shunt capacitor banks (3.3Kv to 132KV 220KV) are manufactured by capacitor units size range of 50KVAr to 1000KVAr & voltage range of 1 KV to 22KV. Capacitor units are connected in various formations of star double star and delta, depending upon customers requirement applications and applicable protection schemes. Capacitor banks are available in all the ratings to suit the customers system requirement. Applications: HV Capacitors are in service for various applications (like Steels Cements Chemicals-Fertilizers Paper Railways Defense Electricity boards Utility companys) for more than four decades in India and in other countries like Indonesia , Georgia, Bangladesh, Iraq, Nepal, Bhutan.

LT All-PP Capacitor unit: Capacitor units are manufactured in the range of 5KVAr to 200KVAr in the voltage range of 110 V to 1000Volts. Capacitor banks (220 Volts to 440V / 1000V) are formed by series parallel combination of these units connected in various formations depending upon customers requirement / applications and applicable protection schemes. Bare capacitor units are used inside the automatic PF correction panels. Capacitors are type tested as per IEC / ISS (IS-13585/1994) in CRPI /ERDA Laboratory.

Electrical equipments are continuously subjected to abnormal voltage due to internal and external reasons. These may occur on account of lightening, switching operations, system faults and other abnormal conditions. Surge capacitors are capable of bringing down the steepness of over voltage transients that may appear across the transformers, motors and other AC line connected equipments. Unless the transients are swamped effectively, they may cause catastrophic failure of these devices. By reducing the slope of incoming surge, conventional arresters fitted in conjunction with surge capacitors, the level get truncated before operating across the insulation of a device. Surge capacitors are designed to withstand and absorb damped or oscillatory line disturbances without affecting the main frequency performance at the point of common coupling. Surge Capacitors are manufactured as per relevant IEC specifications / IS-11548/1986

HT unit: Capacitor units are manufactured in the range of 50KVAr to 1000KVAr & in the voltage range of 1 KV to 22KV. High voltage capacitor banks (3.3Kv to 132KV 220KV) are formed by series parallel combinations of these units & connected in various formations of star double star and delta, depending upon customers requirement applications and applicable protection schemes. We have supplied hundreds of banks of ratings varying between 2-24 MVAr With similar capacitor units. Capacitors are type tested as per IEC ISS (IS-13925) in CRPI (Govt of India), accredited by NABL Laboratory.

High voltage shunt capacitor banks (3.3Kv to 132KV 220KV) are manufactured by capacitor units size range of 50KVAr to 1000KVAr & voltage range of 1 KV to 22KV. Capacitor units are connected in various formations of star double star and delta, depending upon customers requirement applications and applicable protection schemes. Capacitor banks are available in all the ratings to suit the customers system requirement. Applications: HV Capacitors are in service for various applications (like Steels Cements Chemicals-Fertilizers Paper Railways Defense Electricity boards Utility companys) for more than four decades in India and in other countries like Indonesia , Georgia, Bangladesh, Iraq, Nepal, Bhutan.

LT All-PP Capacitor unit: Capacitor units are manufactured in the range of 5KVAr to 200KVAr in the voltage range of 110 V to 1000Volts. Capacitor banks (220 Volts to 440V / 1000V) are formed by series parallel combination of these units connected in various formations depending upon customers requirement / applications and applicable protection schemes. Bare capacitor units are used inside the automatic PF correction panels. Capacitors are type tested as per IEC / ISS (IS-13585/1994) in CRPI /ERDA Laboratory.

Electrical equipments are continuously subjected to abnormal voltage due to internal and external reasons. These may occur on account of lightening, switching operations, system faults and other abnormal conditions. Surge capacitors are capable of bringing down the steepness of over voltage transients that may appear across the transformers, motors and other AC line connected equipments. Unless the transients are swamped effectively, they may cause catastrophic failure of these devices. By reducing the slope of incoming surge, conventional arresters fitted in conjunction with surge capacitors, the level get truncated before operating across the insulation of a device. Surge capacitors are designed to withstand and absorb damped or oscillatory line disturbances without affecting the main frequency performance at the point of common coupling. Surge Capacitors are manufactured as per relevant IEC specifications / IS-11548/1986