Our Products
Spectrophotometers
2 Products availablePolishing Machines
2 Products availableLaboratory Apparatus
1 Products availableLaboratory Equipments
1 Products availableMicroscope
1 Products availableTesting Equipment
1 Products availableCrusher, Shredder & Presses
1 Products availableWe are leaders in the market for providing best range of Advance Cyclic Corrosion Chamber, single load Tribometers and single module system
With 150mm X-Y stages and an adjustable height clearance of up to 200mm, the ST400 is ideal for a wide range of samples with varied geometries. With the optical video zoom or optical microscope, high magnification microscopy work can be done in combination with measuring roughness and other properties at precisely selected locations. An AFM integration expands the 3D capabilities into the sub nanometer range including laterally which is not attainable with any other optical technique. The advanced software makes it easy to select zones on the video to be scanned automatically by Profilometer or by the AFM. Quality control options are available to automate various aspects of testing including image pattern recognition, database communications, macros for automatic testing and analysis recipes. Chromatic Confocal line sensors are also available on this system to allow speed of up to 200 times faster than the single point sensor. Custom ST400s are available for more open configurations that allow for larger X-Y stages, 360 rotational stages and many other custom configurations.
The Chromatic Confocal technique uses a white light source (LED) that passes through a series of lenses, called an optical pen, which has a high degree of chromatic aberration. The refractive index of the lenses will vary the focal distance of each wavelength of the white light. In effect, each separate wavelength of the white light will focus at a different distance from the optical pen, creating the measurement range. When a surface of interest is within the measurement range a single wavelength of the white light will be in focus while all others will be out of focus. The white light is then reflected back through the optical pen, then through a pin hole filter that allows only the focused wavelength to pass through to a CCD spectrometer. The CCD will indicate the wavelength in focus, which corresponds to a specific distance for a single point. The physical wavelength measured uses no algorithms providing the highest accuracy independent of form, roughness level, illumination and measurement speed. There is no special levelling procedure required. And while others make claims ofresolutions Nanovea provides high accuracy.Physical Wavelength Measured + No Algorithms Needed for Results = Higher AccuracyLevel of accuracy independent of form, roughness level, illumination and measurement speedNo special levelling procedure requiredMost claim very high resolutions. Nanovea provides high accuracy.
CHROMATIC CONFOCAL MEASUREMENTChromatic Confocal by design ensures the highest accuracy of all optical techniques. Specifically when measuring surfaces that are geometrically complex (randomly rough surfaces). Other techniques are subject to many error sources that are simultaneously present and it is not possible to remove or compensate for them or even to estimate their combined influences. The Profilometer offer high accuracy across the widest range of materials and surfaces conditions including tissues, biomaterials, polymers, plastics, metals, composites and ceramics. As an additional measurement signal to the height data, the technique also provides reflection intensity which can be used for highlighting features not seen by height variations. It can also be used to quantitatively measure variation of surface reflectivity.
Plus all standards achieved by Ascott standard CCT Chambers. The Atmosfar Lite test chamber has been specifically designed to facilitate fully automatic testing in accordance with highly demanding laboratory accelerated corrosion tests, which have become increasingly popular, particularly in the automotive industry. These tests are cyclic in nature and comprise exposure to controlled and varying conditions of temperature and humidity, with intermittent spraying of a salt solution Such testing can be used to:
In addition, Atmosfar Lite chambers have been designed so that a wide variety of other corrosion tests can be conducted within them. For added flexibility, Atmosfar Lite chambers also retain the ability to perform conventional salt spray tests and Cyclic Corrosion Test (CCT) in accordance with a wide range of international test standards. The Atmosfar Lite is for corrosion test standards that do not require sub zero temperatures, for sub-zero requirements see the Ascott Atmosfar. |
Functionality of a product is considered as a matter of course, so the perception of quality is determined
primarily by the visual appearance. Damage to a surface by the human hand is one of the main reason for disturbance of the products quality perception. The hand abrasion is a very complex chemical and mechanical combination. By touching a surface the human hand performs a mechanical strike followed by a push-slide force. The human hand consists of a visco elastic material containing a rough and structured surface. In addition, sweat or hand cream creates a severe chemical environment.
The TRIBOTOUCH instrument is designed to do real life testing of finished products or lab samples in regards of resistance to hand abrasion. The set-up of the TRIBOTOUCH is exactly reproducing the complex chemo mechanical system of the human hand abrasion according to international standards. The flexible design of the TRIBOTOUCH allows various options and delivers reproducible results.
Key Features
| Precise temperature controlled, high humidity environment. Water held in a sump located in the cabinet base, is heated by an immersion heater to generate water vapour. As water vapour evaporates, it saturates the cabinet atmosphere with moisture. Test samples in the cabinet, below the dew-point temperature of the saturated air, will develop surface condensation. By careful design the high humidity environment is achieved without the need for a circulation fan, which would otherwise have to endure the hostile, high humidity environment. Safety cut-outs ensure the immersion heater is automatically isolated if the water reservoir runs dry. |
The Jr25 is the first truly portable high performance Profilometer of its kind. With an optional battery pack and carrying case, the Jr25 provides measurement capability during field studies. The Jr25 is designed to utilize the superior Chromatic Confocal technique with complete portability. With a total weight less than 5.5 Kg, the operator can safely place the Jr25 onto the surface under inspection. The Jr25 has the ability to measure an area up to 25mm x 25mm and focusing on the surface is easy with an adjustment range of 30mm. With a fully rotational scanning head, the Jr25 has the ability to measure surfaces at difficult angles. Along with quick and ease of use, the Jr25 has been designed specifically for production environments where samples cannot be moved or in open field studies. The scanning head of the Jr25 can also be integrated onto automated robotic arms and other equipments.
he Chromatic Confocal technique uses a white light source (LED) that passes through a series of lenses, called an optical pen, which has a high degree of chromatic aberration. The refractive index of the lenses will vary the focal distance of each wavelength of the white light. In effect, each separate wavelength of the white light will focus at a different distance from the optical pen, creating the measurement range. When a surface of interest is within the measurement range a single wavelength of the white light will be in focus while all others will be out of focus. The white light is then reflected back through the optical pen, then through a pin hole filter that allows only the focused wavelength to pass through to a CCD spectrometer. The CCD will indicate the wavelength in focus, which corresponds to a specific distance for a single point. The physical wavelength measured uses no algorithms providing the highest accuracy independent of form, roughness level, illumination and measurement speed. There is no special levelling procedure required. And while others make claims ofresolutions Nanovea provides high accuracy.Physical Wavelength Measured + No Algorithms Needed for Results = Higher AccuracyLevel of accuracy independent of form, roughness level, illumination and measurement speedNo special levelling procedure requiredMost claim very high resolutions. Nanovea provides high accuracy.
CHROMATIC CONFOCAL MEASUREMENTChromatic Confocal by design ensures the highest accuracy of all optical techniques. Specifically when measuring surfaces that are geometrically complex (randomly rough surfaces). Other techniques are subject to many error sources that are simultaneously present and it is not possible to remove or compensate for them or even to estimate their combined influences. The Profilometer offer high accuracy across the widest range of materials and surfaces conditions including tissues, biomaterials, polymers, plastics, metals, composites and ceramics. As an additional measurement signal to the height data, the technique also provides reflection intensity which can be used for highlighting features not seen by height variations. It can also be used to quantitatively measure variation of surface reflectivity.
Add the 508 PV to any microscope or probe station for spectroscopy, colorimetry and micro spot film thickness.
Fromtheexperts in microspectroscopy
Fromtheexperts in microspectroscopy
With a small footprint (30 x 25 x 27cm), the PS50 is the most advanced compact Profilometer available. The high-performance PS50, with 50mm X-Y stages, is the ideal choice for upgrade and replacing stylus and laser profilers. The PS50 has the option of running by laptop which makes for an easy moving and installation where space is critical. Comes standard with 150mm x 150mm sample stage area to accommodate multiple and or larger samples. Quality Control options with macros for automatic testing and analysis recipes.
Compact Benchtop 50mm x 50mm XY Ideal Upgrade From Stylus and Laser Technologies Highly Competitive Price & Financing Option Now Available
The Chromatic Confocal technique uses a white light source (LED) that passes through a series of lenses, called an optical pen, which has a high degree of chromatic aberration. The refractive index of the lenses will vary the focal distance of each wavelength of the white light. In effect, each separate wavelength of the white light will focus at a different distance from the optical pen, creating the measurement range. When a surface of interest is within the measurement range a single wavelength of the white light will be in focus while all others will be out of focus. The white light is then reflected back through the optical pen, then through a pin hole filter that allows only the focused wavelength to pass through to a CCD spectrometer. The CCD will indicate the wavelength in focus, which corresponds to a specific distance for a single point. The physical wavelength measured uses no algorithms providing the highest accuracy independent of form, roughness level, illumination and measurement speed. There is no special levelling procedure required. And while others make claims ofresolutions Nanovea provides high accuracy.Physical Wavelength Measured + No Algorithms Needed for Results = Higher AccuracyLevel of accuracy independent of form, roughness level, illumination and measurement speedNo special levelling procedure requiredMost claim very high resolutions. Nanovea provides high accuracy.
CHROMATIC CONFOCAL MEASUREMENTChromatic Confocal by design ensures the highest accuracy of all optical techniques. Specifically when measuring surfaces that are geometrically complex (randomly rough surfaces). Other techniques are subject to many error sources that are simultaneously present and it is not possible to remove or compensate for them or even to estimate their combined influences. The Profilometer offer high accuracy across the widest range of materials and surfaces conditions including tissues, biomaterials, polymers, plastics, metals, composites and ceramics. As an additional measurement signal to the height data, the technique also provides reflection intensity which can be used for highlighting features not seen by height variations. It can also be used to quantitatively measure variation of surface reflectivity.
A new generation precision cutting machine
Robustly built with compact dimensions, it has the ability to cut a wide range of materials (from the hardest to the softest).
The large tactile screen provides an easy to use interface to control all cutting parameters and display X-axis positioning of the cut.
MECATOME T330 is specially designed to be able to accommodate larger samples. With the raised cutting bed, unobstructed large cutting chamber and large hood with side ports, even very long pieces are easily mounted for transverse sectioning. For repeated serial transverse sections there is an optional motorised X-axis table available.
The latest technology in motors and motor control is used for the X and Y drives to give optimum feed control and positional accuracy. Once set, control of the cutting motor speed and Y axis feed rate is automated to provide the optimal cut in the shortest time. The cutting chamber of the MECATOME T330 is very spacious, well lit and easy to clean. It is supplied with a large cutting table mounted with interchangeable stainless steel T slot beds that will accommodate a wide range of sample fixturing devices. Cutting wheel change is easy with the unobstructed design of the wheel guard and the built in arbor lock.
MECAPRESS 3 is a fully automated hot mounting press.Very easy to use, MECAPRESS 3 offers all the features expected in a high precision machine: memorisation and adjustment of all mounting parameters, custom programmability, rapid cycle option and water saving mode.
A powerful and flexible machine.
The top of the range manual polishing machines
MINITECH polishing machines are robust, powerful and reliable, incorporating the most advanced technologies for ease of use and simplified maintenance.
Thanks to the LCD touch screen which can be positioned on the left or right side of the polishing machine, it is very easy to set the parameters such as speed, rotation direction, water spray and time. 3 polishing programs can be stored in the memory of the touch screen. Parameters may also be changed during the polishing cycle. The pressure manually applied to the polishing platen can be displayed thanks to a force sensor. Multi-jet water spray with adjustable flow is continuously cooling the platen.
Equipped with removable bowl, MINITECH polishing machines are very easy to clean and their composite bodies and bowls do not rust.
Their new technology provides a constant rotation of the platen, whatever the force applied, giving the possibility to polish large sized samples.
The top of the range of automatic polishing machines
MECATECH 234-264 is a range of robust, powerful and reliable polishing machines incorporating the most advanced technologies for an easy use and fast maintenance.
Its platens 200 and 250mm, associated with the TC 10, TI10 and TCI10 polishing heads give the best polishing results on all types, sizes and numbers of specimen.
The T50 Tribometer is designed for loads from 100mN to 60N. All NanoveaTribometers are equipped with a solid coated 20mm steel plate attached to the main rotating shaft supported by high quality bearings for maximum stiffness, smooth rotation and longevity of use. A state of the art motor equipped with a 20bit internal speed and a 16bit external position (>0.006) encoder provides an unmatched range of rotational speeds from 0.01 to 5000rpm. Friction is directly measured independently using an accurate load cell that is easy and quick to calibrate. All Nanovea load cells are compensated in temperature which ensures accuracy when the high temperature oven is used. All NanoveaTribometers are designed and equipped with an integrated heat sink part of the main shaft. This allows cooling using only air when the high temperature module is used. Block on ring is an additional configuration to the standard Rotative module. Nano Wear and friction option is also available at Nanovea for loads down in the micron range.
V microscope imaging microscopic samples in the ultraviolet, visible and near infrared.
|
| MECATOME T210 provides for rapid cutting of medium size parts and the possibility of multiple serial sections with the optional X axis drive. Positional accuracy and a range of speeds is ensured with the use of high precision motors for the Y axis and the optional X axis. Cutting of even the most difficult materials is ensured with the powerful cutter motor and Y axis motion being optimized and under automated control. The work area under the hood is spacious, well lit and equipped with a T slot table compatible with most clamping systems available. Sample cooling and lubrication can be by the internal self- contained system or through the use of an external re-circulating system. | |||
The CB500 allows a single module, either the nano or micro, each with the full range of testing modes including hardness, scratch and wear. Nowhere else can you find this wide use with a single module and at competitive compact price. It is equipped with automated 50mm x 100mm X-Y stages, a 50mm Z stage and a video zoom microscope. A CB500 version with manual X-Y table offers full indentation capabilities at the most affordable price. All CB500 bases can also accommodate the heating oven and the cooling/humidity control chamber for environmental control testing. It is the ideal solution for quality control and research applications with focus in one broad load range. Compact & modern design, broad application use, robust with low cost of ownership and a highly competitive price.See News Feature
