Verified
Add Review
Our Products
Transmitter Device
1 Products availableIndustrial Pump
1 Products availableLeak Detectors
1 Products availableIndustrial Valves
1 Products availableOil And Lubricants
1 Products availableTemperature Controller
1 Products availableWe offer a complete product range of Digital Pirani Vacuum Gauge, Analog Pirani Vacuum Gauge, Digital Penning Vacuum Gauge, Analog Penning Vacuum Gauge and analog vacuum gauge
The Digital Pirani Vaccum Gauge helps the user to measure small pressure changes. In a Digital Pirani Vacuum Gauge, nickel and tungsten wires are used as filament. Nickel Wire does not only have higher sensitivity but also possess other advantages. The Digital Pirani Vacuum Gauge works on the theory that, when the wires heats to an optimum temperature to portray the sensitivity in the environment. The Digital Pirani Vacuum Gauge is used to measure the discrepancy in temperature.
Features :
Applications :
Technical Specifications
| Models | DPRG-1GH | DPRG-1GH-SP | DPRG-2GH | DPRG-2GH-SP | DPRG-1GH-2SP |
|---|---|---|---|---|---|
| Number of sensor channels | ONE | TWO | ONE | ||
| Display Range | FULL range: 0.001 to 1000 mbar
|
||||
| Measuring Range | USEFUL range :0.001mbar to 100 mbar
|
||||
| Units of Display | m Bar
|
||||
| Vacuum Gauge | S-PR-GH sensor tube
|
||||
| Temp. Range | +2 to +50 deg. Celsius
|
||||
| VAC Display | 4-digit bright red LED, 14 mm high
|
||||
| Display Indicators | NIL | red LED for SET PT 1 | Red LED for channel 1&2 selected | Red LED for channel 1&2 Selected& red LED for SET PT 1&2 | RED LED for set point 1 & 2 |
| VAC and ATM Adjust | adjusted by trim pot at the signal conditioner PCB. | ||||
| Process control set points | NIL | ONE | NIL | TWO | TWO |
| Process Control Relays | NIL | One relay, 2 amp, 240 VAC contacts; independent available through the DB15 accessory connector | NIL | Two relays, 2 amp, 240 VAC contacts; independent available through the DB15 accessory connector | Two relays, 2 amp, 240 VAC contacts; independent available through the DB15 accessory connector |
| Nonvolatile Memory | for SET POINTS | ||||
| Operating Voltage | universal power supply, which operates on input voltages from 90 ~ 264VAC 50/60 Hz; standard IEC 320 instrument power input receptacle on rear panel; replacement fuse type: 5 mm X 20 mm, 2 amp | ||||
| Mounting | Side clips are provided for panel mounting in standa rd ¼ DIN 92 x 92 mm (3.62” x 3.62") | ||||
| Environmental Considerations | not for use with explosive or corrosive gases | ||||
We have established a stronghold in manufacturing Analog Pirani Vacuum Gauge. Analog Pirani Vacuum Gauge is designed to perfection under the guidance of skilled professional, who possess expertise in this domain. Manufactured using universally accepted safety norms, Analog Pirani Vacuum Gauges help in enhancing the operational fluency of Vacuum Pressure. The filament constructed in the Analog Pirani Vacuum Gauge can detect even the slightest of change in system pressure and thus bring a balance to restore smooth functioning.
Salient Feature :
Technical Specifications
| Particulars | Details |
|---|---|
| Unit of measurement | m.bar |
| Sensor model | - |
| Pressure range | 0.5 to 0.001 mbar |
| Display | Continuous single scale meter display with selector switch for GH selection. |
| Number of gauge heads | Standard Two (optional single gauge head ) |
| Power input | 220V AC, 50 Hz |
| Operating temp. | 15 to 45 deg C |
| Analog output | 0 to 200mV DC |
| Calibration | Factory set |
| Gauge head mounting | Orbitary (preferably vertical) |
| Gauge head cable | Standard 2 mtrs, extra length on request |
| Dimensions | 179mm X 98mm X 98mm |
| Cut out size | 92 mm X 92 mm |
| End connection of gauge head | KF-10 |
We offer high quality Digital Penning Vacuum Gauge. Digital Penning Vacuum Gauge is a Cathode Ionised Gauge that consists of two electrodes: anode and cathode. When difference of 2.2 KV passes between the anode and cathode through the resistors, a magnetic field generates within the Digital Penning Vacuum Gauge. Digital Penning Vacuum Gauge is an instrument used in high vacuum system, coating units, sputtering units, vacuum furnace and other applications.
Technical Specifications
| Particulars | Details |
|---|---|
| Unit of measurement | Mbar |
| Pressure range | 9.9 X10-3 to 10-6 mbar |
| Display | 3 digit seven segment LED |
| Number of GHs | 220v AC , 50 Hz |
| Operating temp. | 15 to 45 deg C |
| Analog output | 0 to 3.5V DC |
| Calibration | Factory set |
| Gauge head mounting | Any position |
| Gauge head cable | Standard 2 mtrs, extra length on r equest |
| Dimensions | 98 X98X 250mm |
| Cutout size | 92X92 mm |
| End connection of GH | KF-25 |
Analog Penning Vacuum Gauge is a cold cathode ionization Gauge that consist of two electrode cathodes. In the Analog Penning Vacuum Gauge a difference of about 2.2KV is applied between the anode and the cathode through current limiting resistor. The Analog Penning Vacuum Guage is manufactured using highest quality high vacuum measurement in order to ensure higher accuracy of result.
Salient Features :
Technical Specifications
| Model No. | C-80 |
|---|---|
| Pressure Range | 10-2 to 10-6mbar in two ranges of 1x 10-2 to 1x10-5 mbar and 3x10-5 mbar to 1x10-6 mbar |
| Display | Wide view analog panel meter calibrated directly in mbar in the ranges |
| Capacity | One Gauge head |
| Power Input | 220V AC ±10%, 50 Hz |
| Power cord | 2 Mtr. long cable with 3 pin, 5 amp plug as standard. Extra long cable on request. |
| Type | PNG 22 |
| Useful Range | 10-2 mbar to 10-6mbar |
| End flange connection | Standard KF-25 |
| Gauge Head Cable | 2 Mtr. long Amphenol sockets suita bly connected on both sides as standard extra length cable on request |
Peenya, Bangalore, Karnataka