Our Products
Chillers
2 Products availableFilters
1 Products availableIndustrial Valves
1 Products availableWe offer the best product range of Air Dryer for CNG Pump and compressed air equipment.
Compressed air is basically produced by the compression of atmospheric ambient air containing all the usual pollutants. Compressed air filters, often referred to as line filters, are used to remove contaminates like dust particles, oil from compressed air after compression has taken place. Air leaving a standard screw or piston compressor will generally have high water content as well as oil carry over and other contaminates. Special air filters are used for the filtration of compressed air. Every pneumatic application is different and requires different filtration levels.
Oil Removal Filters
When ambient air is compressed to a higher pressure in a compressor the impurities in the atmosphere also get into the air. The oil from the atmosphere and within the compressor also gets into the discharge air of the compressor. This oil content in the compressed air is harmful for the various components present in the compressed air line. For the removal of oil content in the compressed line Activated Carbon Filters are used. The Activated Carbon adsorbs the oil content from the compressed air thus giving out Oil-free compressed air.
Specifications we can manufacture are
Sr No | Type Of Oil Filter | Range | |
Flow Rate | Pressure | ||
1 | Activated Carbon Filter | 10 CFM to 10000 CFM | 0.5Kg/cm² to 40Kg/cm² |
Sr No | Type Of Filter | Range | ||
Flow Rate | Pressure | Filtration Efficiency (Microns) | ||
1 | Borosilicate Glass Fiber | 10 CFM To 10000 CFM | 0.5 Kg/cm² to 40 Kg/cm² | 0.01 0.1 1 5 |
2 | Sintered bronze | |||
3 | Polymer Candle |
Compressed air is used during the staring of CNG pumps. It is necessary that dry moisture free air should be supplied during this staring process. We manufacture compact high pressure (upto 16 kg/cm) desiccant air dryers that can be supplied along with the CNG pumps
These drain valves especially suitable for removing condensate having sludge and rust laden from compressed air systems. These drain valves find most suitable application for installation on compressors (after-coolers), dryers, receivers, drip legs, moisture separators, etc. Features include: fully automatic, no maintenance 12 mm orifice manual test switch indication for valve healthiness easy to replace specially suitable for drain sludge and rust laden condensate glass-filled nylon coil former a-ring seal on cycle adjustment pots to ensure weatherproof sealing small compact resistant abs timer.
Air chillers are used when the air is required at a temperature that is below the ambient temperature. The air chiller cools compressed air to a temperature of +5 C economically without applying CO2 or N2. It is used in cooling and maintaining temperature of output product from machines, providing cold air to processes, laboratory etc.
Water chilling plants are used when the water is required at a temperature that is below the ambient temperature or when the cooling water temperature from the cooling tower is insufficient. Water chilling plants are mainly used in cooling and maintaining temperature of industrial equipment and machines, cooling of drinking water etc.
In water chilling plants the water is chilled with the help of refrigeration system. For achieving cooling temperature below 0°C, Brine can also be added into the system.
Sr No | Type Of Chiller | Range | |
1 | Water Chilling Plant or Brine Chilling Plant | Air Cooled or Water cooled | 1 Tr to 50 Tr |