Union Pump Company

Fort, Mumbai, Maharashtra

Uniboost High pressure pumps is designed with Advanced Pump Technology which ensure quality, reliability and efficiency. Our high pressure pumps are Horizontal, simplex or Triplex positive displacement plunger pumps.
Design:
Pump drive end assemblies are of rugged construction with high quality materials and heavy duty taper roller bearings. Bearings are lubricated by splash lubrication. Pumps are designed to permit rapid and economical maintenance, particularly regarding plunger, packing and valves are manufactured to ensure accurate alignment on reassembly.

> Extra Strong, Heavy Duty Power frame ensures uninterrupted smooth long life

> Wide variety of valves are available to suit different pumping fluids and applications

> Three piece liquid end block design avoids any possibility of block cracking

> Spring loaded Plunger / Special Gland Packing always ensures leak free pumping service

> Reversible valve seats double the normal life of valve seats thus become long lasting quite smooth operation.

> Totally dependable, reliable and efficient performance

> Easy to maintain, simple to repair and nominal maintenance cost.

Fluid can be accelerated to very high velocities through a nozzle by the application of sufficient hydraulic horsepower. Hydraulic horsepower is proportional to the product of fluid pressure and the volume delivered. Fluid velocity is proportional to the pressure developed through a nozzle orifice. The impact of high pressure fluid jets can remove deposits which defy mechanical cutting tools, without any damage to underlying materials by correct selection of nozzles, accessories and power sources.

The High Pressure Unit consists of the following:> High Pressure Reciprocating (Simplex / Duplex / Triplex) Pump.> Prime Mover : Electric Motor / Diesel Engine.> Mounting : Base Plate / Trolley / Trailer.> Pulley set with belts and guard or Coupling with guard.> Standard Accessories : Pressure Gauge, Pressure Regulating Valve, Safety Valve, Strainer.> Cleaning Accessories (Optional)

> Abrasion resistant chrome plated rotor

> Stator elastomers to suit specific requirement

> Wide range of material of construction

> Hardened bush pin type universal joint sealed and grease lubricated

> Heat treated, hard chrome plated drive shaft

UBH Series: Standard S SeriesCapacity: upto 250 m3/hr Head 12 kg/cm2Capacity: upto 72 m3/hr Head 24 kg/cm2

UBH AG Series: Sugar Type S SeriesCapacity: upto 250 m3/hr Head 12 kg/cm2Capacity: upto 72 m3/hr Head 24 kg/cm2

UBH VT Series: Vertical Type S SeriesCapacity: upto 72 m3/hr Head 24 kg/cm2

UniBoost multistage selfpriming pumps use the side channel design principle. The pumps are built as single stage or multistage pumps. All the wetted parts are made from SS 316 investment casting using lost wax process giving excellent surface finish, sound casting, giving minimum resistance to flow resulting in better efficiencies. The pump stages are staggered redially to bring about balance and minimize shaft deflection. The open star (vane) type impeller are individually hydraulically balanced thus eliminating the axial thrust on the external ball bearings of the pumps. The pumps are fitted with M-seal.

> The pumps are built as single stage or Multistage

> All wetted parts are SS-316 investment casting

> Selfpriming - side channel design principle

> The pump stages are staggered redially to bring about

balance and minimize shaft deflection

> The pumps are fitted with M-seal.

> Monoblock Construction

> Wide range to suit a variety of requirements

> High effeciency, Less Power Consumption

> Pumps with Stainless Steel Sleeve for less Shaft water

> Trouble free operations with low maintenance

Standard Specification
> Range: 1.5kW to 22kW (2.0 HP to 30.0 HP)> Supply: 415V +/- 10%, 50Hz, 3phase> Pipe size: 50 x 40 mm to 100 x 100 mm.> Liquid Temperature: Suitable upto 90 degree celsius water> Total Head: upto 90 metres> Capacity: 3000 LPM> Liquid: Clear water> Rotation: Clockwise as viewed from motor end.

Material of Construction

• Pump Body: CF8M [SS-316]
• Front Cover: CF8M [SS-316]
• Back Cover: CF8M [SS-316]
• Gland Cover: CF8M [SS-316]
• Packing: Teflon Sheet
• Sealing: Z Pack/ Mech. Seal
• Bush Bearings: Teflon Coated "DU
• Mounting Bracket: C.I.Gr.-20 IS 210
• Rotor/Stator Shaft: EN-57/SS-430
• Key For Coupling: AISI [SS-316]

Uni boost Self Priming Centrifugal De watering Pumps are designed and manufactured for optimum efficiency to cater different needs of water handling. The pump construction is suitable for handling muddy & sewage water, contaminated water with solids up to 40mm.

> Efficient design and performance as available in international market

> Automatic air releasing while priming is design specialty with added feature of quick and self-priming

> Design of impeller is semi open / open vane type for non-clogging and unable to handle solids.

> Back pull out design for repair possible without distributing pipelines

> All rotating parts are dynamically balanced for smooth running and low vibration

> Long product life due to replaceable wearing parts

> Available in Monoblock Pump set and bare pump design

> Bare pump can be coupled with either motor or engine

> Motor designed for wide voltage fluctuations for monoblock pump sets

* From 180 to 240 volts for single phase

* From 350 to 450 volts for 3 phase

> Easy maintenance due to availability and interchangeability of spares

Head: 6 to 34 Meters
Discharge: 76.8 to 1.0lit per second
Pipe Size: 40 x 40 to 150 x 150 mm

For motor drive bare pump : 0.75 kW to 18.70 kW (1.00 HP to 25.00 HP)
For engine drive bare pump: 4.00 kW to 19.50kW (6.00 HP to 26.00 HP)