Union Enterprise Pvt. Ltd.

Fort, Mumbai, Maharashtra

> Extra Strong, Heavy Duty Power frame ensures uninterrupted smooth long life

> Wide variety of valves are available to suit different pumping fluids and applications

> Three piece liquid end block design avoids any possibility of block cracking

> Spring loaded Plunger / Special Gland Packing always ensures leak free pumping service

> Reversible valve seats double the normal life of valve seats thus become long lasting quite smooth operation.

> Totally dependable, reliable and efficient performance

> Easy to maintain, simple to repair and nominal maintenance cost.

UniBoost multistage selfpriming pumps use the side channel design principle. The pumps are built as single stage or multistage pumps. All the wetted parts are made from SS 316 investment casting using lost wax process giving excellent surface finish, sound casting, giving minimum resistance to flow resulting in better efficiencies. The pump stages are staggered redially to bring about balance and minimize shaft deflection. The open star (vane) type impeller are individually hydraulically balanced thus eliminating the axial thrust on the external ball bearings of the pumps. The pumps are fitted with M-seal.

> The pumps are built as single stage or Multistage

> All wetted parts are SS-316 investment casting

> Selfpriming - side channel design principle

> The pump stages are staggered redially to bring about

balance and minimize shaft deflection

> The pumps are fitted with M-seal.

Volute Casing:One piece self venting, high efficiency, volute casing suction and discharge ends as well as the supporting feet are integrally cast in the volute casing
Impeller:Closed radially impeller specially designed for low NPSH requirement. Hydraulically balanced by back vanes and for large impeller diameters by balancing holes.
Shaft & Bearing:The Shaft is guided in oil lubricated bearings. The alignment of bearing is ensured by appropriate centerings and modern manufacturing methods. Shaft is of high tensile steel and accurately grounded all over.
Shaft Sealing:Supplied with either asbestos or graphite packing or M seal depends on liquid.
Flanges:As per ASA/BS or DIN 2533 available.

> Metal support piping loads without any strain on

suction and discharge nozzle

> Detachable suction and Discharge branch, save the

expensive casing replacement cost.

> Solid Injection moulded impeller and back plate

> Shaft is well protected by a confirmed PTFE sleeve

> All coolant pumps are manufactured as per IS : 2161.

> All coolant pumps are rated for continuous duty (S1) at an ambient temperature of 40'C.

> Dynamically balanced rotor and impeller.

> All components are manufactured and inspected on latest precision machineries and calibrated instruments to give years of maintenance free operation.

> All pumps are tested as per relevant Indian Standard in latest and well equipped testing lab.

UniBoost magnetic drive chemical process pumps offer many benefits:

1) Minimizes exposure of your personnel to hazardous chemicals

2) Eliminates contacting seal faces which are prone to wear and leakage

3) Provides superior corrosion resistance

4) Eliminates costly seal flush systems required on all pumps with double mechanical seals.

5) Reduces downtime and maintenance costs through extended service intervals

6) Eliminates alignmentproblems inherent in direct-coupled units.

Uni boost Self Priming Centrifugal De watering Pumps are designed and manufactured for optimum efficiency to cater different needs of water handling. The pump construction is suitable for handling muddy & sewage water, contaminated water with solids up to 40mm.

> Efficient design and performance as available in international market

> Automatic air releasing while priming is design specialty with added feature of quick and self-priming

> Design of impeller is semi open / open vane type for non-clogging and unable to handle solids.

> Back pull out design for repair possible without distributing pipelines

> All rotating parts are dynamically balanced for smooth running and low vibration

> Long product life due to replaceable wearing parts

> Available in Monoblock Pump set and bare pump design

> Bare pump can be coupled with either motor or engine

> Motor designed for wide voltage fluctuations for monoblock pump sets

* From 180 to 240 volts for single phase

* From 350 to 450 volts for 3 phase

> Easy maintenance due to availability and interchangeability of spares

Maximum flow rate 100 ltr / minute.

Max discharge pressure up to 12 mtr.

Light Weight

Easy Maintenance

Self priming

> As all pumps are made from rolled stainless steel, mechanical properties are far superior then cast material.

> Pore free, non-pitting and non-adhering smoother surface, so less friction losses, and less crevice corrosion.

> Super finish surface also ensure no ingress or emission of germs or impurities during pumping or idling which is basic requirement of sterile hygienic application.

> Designed for CIP (clean in place) or manual cleaning

> Pumps are highly energy efficient and requires less NPSH to function without cavitations

> Pump can handle liquids having viscosities up to 1500 centipoise

> The pumps can work under a vacuum of 720 mm of Hg, suitable for vacuum evaporators.

> Pumps are available with open/semi open impellers.

> The best elastomers are used in the pumps to provide optimum resistance for high temperatures and chemicals.

> Dynamically combinations of seal faces as per customer\\\'s requirement (single seal / double seal, seal external cooling)

> Suitable for standard motor or flange type or foot cam flange type motor or engine

> Monoblock or bare pumps or with trolley

> Also with flame proof motors