Industrial Pump

Our product range contains a wide range of Screw Pump, Industrial Pump, Gear Pump, Diaphragm Hand Pump and pneumatic pump

Screw Pump

shape of a single external helix, rotates around its on axis in the direction of rotation (say clockwise); while the axis of the rotor, revolves in the opposite direction (say anticlockwise) around the axis of the stator. The stator is made of and elastomeric bonded to end alloy steel tube. The stator itself is in the shape of an internal double helix. The rotor is contained within the stator and forms a continuous seal along the length of the stator. The above movement produces cavities at reduced pressures which move axially from the inlet to the outlet conveying the fluid at fixed flow rate proportional to the rotational speed.

Features :

> Abrasion resistant chrome plated rotor

> Stator elastomers to suit specific requirement

> Wide range of material of construction

> Hardened bush pin type universal joint sealed and grease lubricated

> Heat treated, hard chrome plated drive shaft

View Complete Details

Ask Latest Price & Details

Industrial Pump

UniBoost Centrifugal Monoblock Pumps - UCM Series are designed and manufactured for optimum efficiency to cater to different needs of water handling. The pump range is suitable for a wide range of applications in Commercial and Industrial areas

Features :

> Monoblock Construction

> Wide range to suit a variety of requirements

> High effeciency, Less Power Consumption

> Pumps with Stainless Steel Sleeve for less Shaft water

> Trouble free operations with low maintenance

View Complete Details

Ask Latest Price & Details

Gear Pump

Uni Boost gear pump Model UGNX/UGBX which is heavy duty flange and foot mounting type positive displacement rotary gear pump. These pumps having doubled helical finished gears and hardened & ground shafts. Due to double helical gear it prevent axial load and side thrust which help to increase life and performance of pump. Model UGBX is a bush bearing type pump which can be used for viscous liquid having sufficient lubricating value for intermittent duty; however for continuous duty pump have needle roller bearing in Model UGNX and it will be selected for liquid having low viscosity, power lubricating values. Pump up to 2 1/2 size can be run at 1440 RPM & for higher the speed should be reduced to 960 RPM or Lower. In these pumps size 1/2" to 2 1/2" are provided with thread at end of suction & delivery and they are available with foot or flange mounting, But in size 3" to 6" are provided with flange at the end of suction & delivery and they are available with foot mounting only. These pumps can be operated up to pressure of 21 kg/cm with 5.0 LPM to 2082 LPM flow capacity. These pumps are suitable for liquid up to viscosity of 1, 00, 000 SSU and maximum temperature up to 200c.

Features :

Internal Power losses:

UniBoost Gear Pumps are of 2 types. The mechanical loss is the power required to overcome friction drag of all the moving part within the pump while viscous loss is power loss due to fluid viscous drag & shearing action of the fluid.

Horse Power Calculation:

The bhp required to drive a UniBoost pump is sum of theoretical HP & internal losses. The former is the actual work done in moving the fluid from inlet pressure condition to outlet pressure condition & is product of constant C=0.037, capacity in M3/hr. & pressure I Kg/cm2 or constant C=2.3, capacity in GPM & pressure in PSI.

View Complete Details

Ask Latest Price & Details