HAG SERIES Oil LPGNatural gas fired – 50, 000 to 60, 00, 000 Kcalhr UNITHERM'S LPG/NATURAL GAS fired air heating system is designed specifically with large Industrial drying in mind. It's superior design, efficient performance and high fuel economy makes it a better buy than any other heater of its kind to achieve much lower drying costs than standard conventional ovens. The unit is easy to install, simple to maintain and highly economical to operate. The design is suitable for a maximum temperature of clean hot air at 300 dEG C IN INDIRECT Fired Design & 800 Deg C in Direct fired Units

this highly efficient thermic fluid heater is of vertical construction with a large diameter helical coil placed directly on top of the combustion furnace. This ensures that the intense luminous heat of the flame is fully utilized. This is the first, radiative section comprising of the first pass of hot flue gases.

these gases from radiant coil are then made to pass through a second, convective heat exchanger. This is made of twin concentric helical coils, placed inside a sturdy m.s. Shell having three distinct passes of hot gases in the convective section where maximum amount of heat is extracted from the flue gases. The gases are then made to pass through the air prehater & mechanical dust collector, on way to the chimney through i.d.fan. A generously designed refractory lined external furnace is provided to ensure high furnace volume and grate area and can ensure rated output on low-grade coal and can easily burn most other fuels such as lignite, paddy husk, fire wood, bagasse, etc, without any modifications.

the safety controls and instrumentations provided ensure completely safe operation and provide audio visual alarm and cuts off the combustion in case of abnormal operating conditions.

UNITHERM'S solid fuel fired air heating system is designed specifically with large Industrial drying in mind. It's superior design, efficient performance and high fuel economy makes it a better buy than any other heater of its kind to achieve much lower drying costs than standard conventional ovens. The unit is easy to install, simple to maintain and highly economical to operate. The design is suitable for a maximum temperature of clean hot air at 170 Deg C.

Highly suitable for Tray Driers, FBDs, Spin Flash Driers & other machinery in Chemical units, Dal mills & rice mills for paddy drying

HAG SERIES Oil LPGNatural gas fired – 50, 000 to 60, 00, 000 Kcalhr UNITHERM'S LPG/NATURAL GAS fired air heating system is designed specifically with large Industrial drying in mind. It's superior design, efficient performance and high fuel economy makes it a better buy than any other heater of its kind to achieve much lower drying costs than standard conventional ovens. The unit is easy to install, simple to maintain and highly economical to operate. The design is suitable for a maximum temperature of clean hot air at 300 dEG C IN INDIRECT Fired Design & 800 Deg C in Direct fired Units

high efficiency thermic fluid heaters capacity 1 lac to 80 lac kcal/hr

with highly efficient riello - italy burner.

3 pass design, highest efficiency.

This design gives highest efficiency ever. The Thermic fluid heater is of VERTICAL construction with Two concentric large diameter helical coil & shell assembly, placed directly on top of the combustion furnace. This ensures that the intense luminous heat of the flame is fully utilized. This is the first, Radiative section comprising of the first 3 passes of hot flue gases.

These gases from radiant coil are then made to pass through a second, convective heat exchanger. This is again made of twin concentric helical coils, placed inside a sturdy M.S. shell having two more distinct passes of hot gases, making the total passes of Flue gases inside the TFH to FIVE. Thus maximum amount of heat is extracted from the flue gases. The gases are then made to pass through the Air prehater & Mechanical dust collector, on way to the chimney through I.D.Fan. A generously designed refractory lined external furnace is provided to ensure high furnace volume and grate area and can ensure rated output on low-grade coal and can easily burn most other fuels such as Lignite, Paddy husk, Fire wood, Bagasse, etc, without any modifications.

The Safety controls and instrumentations provided ensure completely safe operation and provide Audio Visual Alarm and cuts off the combustion in case of abnormal operating Conditions.

this highly efficient thermic fluid heater is of vertical construction with a large diameter helical coil placed directly on top of the combustion furnace. This ensures that the intense luminous heat of the flame is fully utilized. This is the first, radiative section comprising of the first pass of hot flue gases.

these gases from radiant coil are then made to pass through a second, convective heat exchanger. This is made of twin concentric helical coils, placed inside a sturdy m.s. Shell having three distinct passes of hot gases in the convective section where maximum amount of heat is extracted from the flue gases. The gases are then made to pass through the air prehater & mechanical dust collector, on way to the chimney through i.d.fan. A generously designed refractory lined external furnace is provided to ensure high furnace volume and grate area and can ensure rated output on low-grade coal and can easily burn most other fuels such as lignite, paddy husk, fire wood, bagasse, etc, without any modifications.

the safety controls and instrumentations provided ensure completely safe operation and provide audio visual alarm and cuts off the combustion in case of abnormal operating conditions.

UNITHERM'S solid fuel fired air heating system is designed specifically with large Industrial drying in mind. It's superior design, efficient performance and high fuel economy makes it a better buy than any other heater of its kind to achieve much lower drying costs than standard conventional ovens. The unit is easy to install, simple to maintain and highly economical to operate. The design is suitable for a maximum temperature of clean hot air at 170 Deg C.

Highly suitable for Tray Driers, FBDs, Spin Flash Driers & other machinery in Chemical units, Dal mills & rice mills for paddy drying