Located in Hyderabad, we have built a wealth of reputation for manufacturing and supplying the top of the line Fixed Output DC Power Supply across the country. The offered Fixed Output DC Power Supply is highly reliable, noise free, low maintenance, and easy on the pocket. As per the demands of clients, we make available the Fixed Output DC Power Supply in variety of specifications.

 

Specifications For Fixed Output Dc Power Supply :

• Input - 230V AC, +10% 50 Hz, Single Phase

• Output Voltage - O/P Voltage DC, +1V adjustable by potentiometer mounted on Front Panel with Lock Nut (VOLTAGE DEPENDS ON YOUR REQUIREMENT)

• Output Current - O/P Current. (CURRENT DEPENDS ON YOUR REQUIREMENT)

• Line Regulation - Better than 0.1% for a line change of 207V to 253V

• Load Regulations - Better than 0.1% from no load to full load and vice versa.

• Ripple - Less than 3mV (RMS) or 100mV peak to peak.

• Protction :
  • Unit is protected against input surges
  • Unit is protected against over loads and continuous short circuits
  • Input is protected by a fuse

• Indicators :
  • One Green LED for Input ON
  • One Green LED for Output ON
  • One Panel mounted Meter with a selector switch to read both voltage and current

• Front Panel Controls :
  • One DPDT switch to ON/OFF the unit.
  • One Potentiometer with Lock Nut to adjust the output voltage at required level

• Termination - Separate PIRI Terminal Block on Front Panel for Input(AC) and Output(DC) and for Remote sensing.

SPECIFICATIONS FOR 0-16V/0-6A VARIABLE DC POWER SUPPLY

1. Model no : UE-VPS-28.

2. Mains input : 230V, +10%, 50Hz, Single phase.

3. Type : CV/CC.

4. Output a) Voltage : 0-16V Variable continuously with coarse & finepotentiometer mounted on front panel.

b) Current : 0-6A Variable continuously with coarse & finepotentiometer mounted on front panel.

5. Line Regulation : + 0.1% max. Output Voltage for + 10% change

in mains Input Voltage.

6. Load Regulation : + 0.1% max. Output Voltage Change for No-load to full load or Vice-versa.

7. Ripple : Less than 2mV R.M.S.

8. Protections : a) Unit is protected by input fuse.

b) Unit is protected against input surges.

c) Output is protected against over loads &

Continuous short circuits

9. Indication(s) : a) One LED for input

b) One LED each for CV and CC indication

c) One 3 digit digital panel meter is provided

to read output voltage.

d) One 3 digit digital panel meter is provided

to read output current.

10. Controls : a) One ON/OFF switch to ON/OFF the Unit.

b) One Core and one fine potentiometer to

Control the output voltage from 0 to 32V.

c) One Core and one fine potentiometer to

Control the output current from 0 to 20A.

NOTE : d) One potentiometer with locknut is

Provided for over voltage setting if required.

11. Mechanical : Bench top / 19 Rack Mounting as required by

you.

12. Cooling : Forced air cooling.

13. Operating Environment : 1) 0C to +50C

14. Terminals : Banana socket(s) at front panel & Piri Terminal

Strip with remote sensing at rear panel if

Required.

Buy the top-notch Variable DC Power Supply from us at the incredibly low prices. We are associated with the #1league Manufacturers and Suppliers of Variable DC Power Supply from Hyderabad, India. The lingering demand of our Variable DC Power Supply owes to their exceptional performance, easy maintenance, and high durability standards. Moreover, we are well-equipped to tackle even the bulk orders of Variable DC Power Supply in short time duration.

 

Specification For Variable Dc Power Supply :

• Output Voltage - O/P Voltage (Depends on customer requirement) DC Settable Continuously with two potentiometers provided on Front Panel clearly marked with coarse and fine voltage controls

• Output Current - O/P Current (Depends on customer requirement) DC settable continuously with two potentio meters provided on Front Panel clearly marked with coarse and fine controls

• Protections -
  • Unit is protected against input surges.
  • Unit is protected against over loads and continuous short circuits.
  • Fuse protection for input .

• Front Panel Controls -
  • Unit ON/OFF switch
  • Coarse Potentiometers to set the output voltage and current at required level is provided on Front Panel.
  • Input fuse.
  • Binding Terminal for Output.

• Front Panel Indications -
  • LED for Input
  • LED for CV and CC
  • 3½ Digit digital panel meter to read the output voltage.
  • 3½ Digit digital panel meter to read the output load current.

specifications for 0-24v/0-5a variable dc power supply

1. model no : ue-vps-46.

2. mains input : 230v, +10%, 50hz, single phase.

3. type : cv/cc.

4. output a) voltage : 0-24v variable continuously with coarse & finepotentiometer

mounted on front panel.

b) current : 0-5a variable continuously with

coarse & fine potentiometer mounted on front panel.

5. line regulation : + 0.1% max. Output voltage for +10% changein mains

input voltage.

6. load regulation : + 0.1% max. Output voltage change for no-loadto full load or vice-versa.

7. ripple : less than 2mv r.m.s.

8. protections : a) unit is protected by input fuse.

b) unit is protected against input surges.

c) output is protected against over loads &

continuous short circuits

9. indication(s) : a) one led for input

b) one led each for cv and cc indication

c) one 3 digit digital panel meter is provided

to read output voltage.

d) one 3 digit digital panel meter is provided

to read output current.

10. controls : a) one on/off switch to on/off the unit.

b) one core and one fine potentiometer to control the output voltage from 0 to 32v.

c) one core and one fine potentiometer to control the output current from

0 to 20a.

note : d) one potentiometer with locknut isprovided for

over voltage setting if required.

11. mechanical : bench top / 19 rack mounting as required by

you.

12. cooling : natural air cooling.

13. operating environment : 1) 0c to +50c

14. terminals : banana socket(s) at front panel & piri terminal strip with remote sensing at rear panel if required.

SPECIFICATIONS FOR +/-15V/3A D.C. POWER SUPPLY 1 INPUT : 230V AC +/- 10%, single Phase2. OUTPUT : +/-15V DC, 3A3. LINE REGULATION : Less than 0.1% for change in input voltage from 207V to 253 V4. LOAD REGULATION : +/-0.1% for change from no load to full load and vice versa5 RIPPLE : Less than 5mV RMS6 DRAFT IN 24 Hrs. : Less than 25%7 OUTPUT VOLTAGE ADJUST: +/- 5% of rated output.8 PROTECTIONS : Output will be protected against over loads, over voltages and continuous short circuits. 9 INDICATIONS ; One LED each to indicate the availability of DC outputs.10 TERMINATIONAS : Input is given through a Circular connector and output is given through a PIRI Terminal.11 OPERATING TEMP : 0 to 55 Degree12 MECHANICAL SIZE : 3U Height X Half 19 Rack width x less than 300mm depth.Two units fitted in full 19 Rack.13 RELATIVE HUMIDITY : 0 to 90% without condensation.14 TEMP. COEFFICIENT : Less than 0.025% per Degree C.

Feel free to place the order for our Dual Output DC Power Supply that is sturdy, efficient, and long-lasting. Our adroit team fabricates the Dual Output DC Power Supply by exploiting the best resources and pioneering technology. Further, the Dual Output DC Power Supply can be tailored in various specifications to satiate the needs of clients. As a reputed Manufacturer and Supplier, we sell the Dual Output DC Power Supply at bargain prices.

 

Output, Programmable) Servo Stabilizers, Smps, Battery Chargers As Per Customer Requirement :

• Input Voltage - 230V AC, +/-10%, Single phase 50Hz.

• Output Voltage - 0-30V Dual Output (Voltage will depends on your requirement)

• Output Current - 0-5A Dual (Current will depends on your requirement)

• Line Regulation - ±0.1% for input variations from 207V AC to 253V AC

• Load Regulation - ±0.1% no load to full load and vice versa

• Ripple - Less than 3mV RMS

• Protection :
  • Unit is protected against input surges
  • Input is provided through fuse
  • Output is protected against over load, continuous short circuit

• Front Panel Indications :
  • LED indication is provided for both input and output voltage
  • One 3 ½ digit digital voltmeter with selector switch is provided to read the voltage and one 3 ½ digit digital ammeter with selector switch is provided to read the output current for both channel

• Front Panel Controls :
  • One DPST Switch to on/off the unit.
  • One coarse and fine potentiometer is provided to set the output voltage from 0-30V as required for each channel separately
  • One coarse and fine potentiometer is provided to set the output current from 0-5A as required for each channel separately

• Termination :
  • Input is connected through 3 pin power card.
  • Output is terminated through Binding Terminals mounted on Front Panel. Output is also terminated on PIRI terminal strip mounted on rear plate with

SPECIFICATIONS FOR +/-24V/2A D.C. POWER SUPPLY 1 INPUT : 230V AC +/- 10%, single Phase2. OUTPUT : +/-24V DC, 2A 3. LINE REGULATION : Less than 0.1% for change in input voltage from 207V to 253 V 4. LOAD REGULATION : +/-0.1% for change from no load to full load and vice versa 5 RIPPLE : Less than 5mV RMS 6 DRAFT IN 24 Hrs. : Less than 25%7 OUTPUT VOLTAGE ADJUST: +/- 5% of rated output. 8 PROTECTIONS : Output will be protected against over loads, over voltages and continuous short circuits. 9 INDICATIONS ; One LED each to indicate the availability of DC outputs.10 TERMINATIONAS : Input is given through a Circular connector and output is given through a PIRI Terminal. 11 OPERATING TEMP : 0 to 55 Degree 12 MECHANICAL SIZE : 3U Height X Half 19 Rack width x less than 300mm depth.Two units fitted in full 19 Rack.13 RELATIVE HUMIDITY : 0 to 90% without condensation. 14 TEMP. COEFFICIENT : Less than 0.025% per Degree C.15. POWER SUPPLY FAILURE ALARAM : Will be provided with relay contacts 16. PARALLEL OPERATION : Will be provided

SPECIFICATIONS FOR 0-32V/0-3A VARIABLE DC POWER SUPPLY 1. INPUT VOLTAGE : 230V AC, +/-10%, Single Phase 50HZ2. OUTPUT VOLTAGE : 0-32V Continuously variable with a coarse & fine Potentiometers provided on front panel3. OUTPUT VOLATE RESOLUTION: 1mV4. OUTPUT CURRENT : 0-3A continuously variable with a coarse and fine potentiometer provided on front panel.5. OUTPUT CURRENT RESOLUTION: 1mA 6. LINE REGULATION : 0.05% for 10% changes in line voltage7. LOAD REGULATION : 0.05% for load changes from no load to full load 8. RIPPLE & NOISE : Less than 1mV rms9. PROTECTION : 1) Fuse protection will be provided for input 2) Output is protected against over loads and continuous short circuit.10. FRONT PANEL INDICATIONS: 1) LED for CV Operation.2) LED for CC Operation 3) Two separate 3 digit digital panel meters will be Provided to read the output voltage and current separately.11. FRONT PANE CONTROLS : 1) One DPST Switch to on/off the unit.2) One coarse and fine potentio meter is provided to set the output voltage from 0-30V.3) One Coarse and fine potenio meter is provided to set the output current from 0-3A 12. TERMINATION : 1) Input is connected though 3 pin power card.2) Output is terminated through binding terminals mounted on Front Pa13. INSULATION : Between Chassis and output terminal > 10M OhmsBetween Chassis and AC plug > 50M Ohms 14. MOUNTING STYLE : Bench top or 19 Rack mounting 15. OPERATING TEMP. : 0-500C 16. COOLING : Natural Air Cooling

SPECIFICATION FOR 0-16V/0-6A LINEAR REGULATED DC POWER SUPPLY 1. Input : 230V +10%, 50Hz, Single Phase2. Output Voltage : 0-16V DC Settable Continuously with two potentiometers provided on Front Panel clearly marked with coarse and fine voltage control 3. Output Current : 0-6A Max 4. Regulation :(Line) CV :

Get in touch for availing the best in class Multi Output DC Power Supply at the unbelievably low prices. We are banded together with the eminent Manufacturers and Suppliers of the Multi Output DC Power Supply from Hyderabad, India. Offered in ample specifications, our Multi Output DC Power Supply guarantees the unrivaled performance without much upkeep or efforts. Further, the Multi Output DC Power Supply is meticulously checked before the dispatch to ensure 100% quality!

 

Specifications For Multi Output Dc Power Supply :

• Output -
  • Output 1 (Depends on your requirement)
  • Output 2 (Depends on your requirement)
  • Output 3 (Depends on your requirement)

• Output Voltage
  • Accuracy - +/- 1%

• Output Current
  • Accuracy - +/-2%

• Display - 3 ½ Digit digital panel meters along with selector switch to read both voltage and current separately.

• Protections -
  • Input is protected against surges
  • All the outputs are protected against over
  • loads and short circuit current.
  • Fuse protection is provided at input

• Controls -
  • One ON/OFF switch at input side
  • Coarse and fine potentiometer for 0-32V o/p
  • One band switch to select the volt and ammeter readings.

• Indications -
  • LED indications for AC input and for all the outputs.

• Terminations -
  • Input is given through a power card
  • Outputs are brought on to binding terminals on front panel.

• Warranty - Units will be given one year warranty against any manufacturing defects

SPECIFICATION FOR DUAL POWER SUPPLY, MODEL NO:UE-DPS-25 1. Input : 230V, +10%, 50Hz, Single phase2. Out Put : a) 0 15V/0-1A Dual output continuously variable by coarse & fine potentiometers mounted on Front panel 3. Line Regulation : Better than + 0.01%+ 2mV for input line change from 207V AC to 253V AC and vice versa 4. Load Regulation : Better than + 0.01% + 2mV for a load change from no-load to full load and vice versa. 5. Ripple & noise : Less than 2mV R.M.S. 6. Protections : a) Unit is protected against input surges through Line filter b) All the outputs are protected against overloads and continuous short circuitsc) All the outputs are fuse protected7. Indications : a) One LED for input ACb) One DC LED for each output c) One 3digit Digital Voltmeter and one 3digit Digital Ammeter with a selector switch to read both Voltage and Current of each output 8. Controls : a) ON/OFF switch to ON/OFF the Unitb) AC fusec) DC fuse separately for each outputf) Two separate 3 digit digital panel meters to monitor output voltage & current continuously will be provided with a 4 pole/3way Rotary Switch.9. Terminals : a) Input is given through 3 pin power card b) All the outputs are terminated on Piri Terminal strip with remote sensing facility at the rear of the unit. All the outputs are also brought on to the Front Panel on Banana Sockets 10. Operating temperature : 0 - 50C11. Cooling : Natural air cooling/Forced air cooling12. Mechanical : Bench top Model

SPECIFICATION FOR 0-30V/0-5A DC POWER SUPPLY 1. Mains input : 230V, +10%, 50Hz, Single phase2. Type : CV/CC 3. Out Put : Voltage: 0 to 30V Current: 0 to 5A 4. Controls : Coarse & fine controls will be provided on front panel for output Voltage & Current setting 5. Line Regulation : + 0.1% max. Output Voltage for + 10% change in mains Input Voltage.6. Load Regulation : + 0.1% max. Output Voltage Change for No-load to full load or Vice-versa. 7. Ripple : Less than 1mV R.M.S. 8. Protections A) Over load / Short circuit : Automatic crossover type (CV/CC)B) Reverse Voltage : Protection against reverse voltage applied at the terminals will be provided. 9. Indication(s) : Two separate front panel 3 digit digital panel meters/Analogue Meters to monitor output voltage & current continuously will be provided.10. Operating Environment : 1) 0C to +50C2) 90% RH at 40C11. Terminals : Banana socket(s) at front panel & Piri Terminal strip with remote sensing at rear panel. 12. Mounting Style : Bench Type

SPECIFICATIONS FOR 0-20V/0-5A VARIABLE DC POWER SUPPLY, MODEL: UE-VPS-65 01. Input Supply : 230V AC, +/-10%, 50-60Hz, Single Phase 02. Output Supply : 0-20V variable 03. Output Current : 0-5A 04. Line Regulation : 0.1% for change in Mains Voltage 05. Load Regulation : 0.1% for load change from no load to full load and vice versa 06. Ripple & Noise : Less than 2mv RMS 07. Stability : Total drift within 8 hrs. after warm up < +/-0.2% plus 5mV 08. Operating Temp. : 0 to +500 C 09. Mode of Operation : Linear Regulated with CV/CC technique for 0-20V 10. Protections : a) Fuse protection at AC Inputb) Output is protected against over loads and continuous short circuits. 11. Controls : a) ON/OFF switch at AC Inputb) Coarse and Fine potentiometes set the output voltage from 0-20V continuouslyC) Coarse and Fine potentiometes set the output current from 0-5A continuously12. Indications : a) LED Indication for AC input b) LED indications for CV & CC c) 3 Digit Voltmeter and Ammeter to read both voltage and current continuously.13. Terminations : a) Input is given through a power cardb) Output is brought on to binding terminals mounted on Front Panel.14. Mechanical : Bench Top Model

ANNEXURE 1SPECIFICATIONS FOR 0-60V/0-30A VARIABLE DC POWER SUPPLY 1. Mains input : 230V, +10%, 50Hz, Single phase 2. Type : CV/CC3. Output : Voltage: 0-60V Current: 0-30A 4. Controls : MCB for Unit ON/OFFCoarse & fine controls will be provided on front panel for output Voltage & Current settings separately. 5. Line Regulation : + 0. 1% max. Output Voltage for + 10% change in mains Input Voltage. 6. Load Regulation : + 0.1% max. Output Voltage Change for No-load to full load or Vice-versa.7. Ripple : Less than 10 mV R.M.S. 8. Protections A) Over load / Short circuit: Automatic crossover type (CV/CC)B) Reverse Voltage : Protection against reverse voltage applied at the output terminals will be provided.C) Fuse : Fuse protection will be provided for both Input and output at rear side.9. Indication(s) : Two separate front panel 3 digit digital panel me to monitor output voltage & Current continuously will be provided. 10. Operating Environment : 1) 0C to +50C 11. Terminals : Banana socket(s) at front panel & Piri Terminal strip with remote sensing at rear panel. 12. Mounting Style : Bench Type or 19 Rack mounting as required.13. Warranty : 1 Year 14. Technical/Service Manual : Will be supplied along with Power Supply

SPECIFICATIONS FOR 0-48V/0-10A REGULATED DC POWER SUPPLY 01. INPUT : 230V AC, +/-10%, 50Hz, Single Phase02. OUTPUT : 0-48V/0-10Amps03. LINE AND LOAD REGULATION : +/-0.05% for variations in input and load variations 04. RIPPLE : Less than 3mV RMS05. INDICATIONS : a) LED indications for AC input , CV & CC operationsb) 4 Digit digital meters to read output Voltage & Load current.06. CONTROLS : a) ON/OFF switch at input side b) Coarse and Fine voltage set potentiometersc) Coarse Current set potentiometers.07. TERMINATIONS : a) Input through a Power cardb) Output will be brought on to Binding terminals on front Panel and also with remote sense terminals an to rear panel.08. PROTECTIONS : a) Fuse protection will be provided at input b) Outputs are protected against over loads & short circuits.09. MECHANICAL : a) Bench top model10. INSTRUCTION MANUAL : One set of instruction manual will be supplied along with each unit.

We are the name to reckon with bulk orders of Arc Lamp Power Supply from Telangana, India. For years, we have maintained our goodwill among the topmost manufacturers and wholesale suppliers of Arc Lamp Power Supply. Our unique and pristine range of Arc Lamp Power Supply is processed using high-grade raw materials, and checked on numerous parameters of quality in order to deliver the perfect range. While we excel in offering an admirable assortment of Arc Lamp Power Supply at suitable rates, our well-qualified team of professionals processes the Arc Lamp Power Supply using the best raw materials and latest machines. While we offer a wide range of Arc Lamp Power Supply in numerous specifications as per the requirements of the clients, we promise durable and sturdy structures. Keeping the convenience of our clients in mind, we offer high performance, and hassle free services. The Arc Lamp Power Supply is well-regulated with good output regulation, low distortion, and high frequency stability. We source them from trusted and reliable vendors in the market.

Located in Hyderabad, we have built a wealth of reputation for manufacturing and supplying the top of the line Fixed Output DC Power Supply across the country. The offered Fixed Output DC Power Supply is highly reliable, noise free, low maintenance, and easy on the pocket. As per the demands of clients, we make available the Fixed Output DC Power Supply in variety of specifications.

 

Specifications For Fixed Output Dc Power Supply :

• Input - 230V AC, +10% 50 Hz, Single Phase

• Output Voltage - O/P Voltage DC, +1V adjustable by potentiometer mounted on Front Panel with Lock Nut (VOLTAGE DEPENDS ON YOUR REQUIREMENT)

• Output Current - O/P Current. (CURRENT DEPENDS ON YOUR REQUIREMENT)

• Line Regulation - Better than 0.1% for a line change of 207V to 253V

• Load Regulations - Better than 0.1% from no load to full load and vice versa.

• Ripple - Less than 3mV (RMS) or 100mV peak to peak.

• Protction :
  • Unit is protected against input surges
  • Unit is protected against over loads and continuous short circuits
  • Input is protected by a fuse

• Indicators :
  • One Green LED for Input ON
  • One Green LED for Output ON
  • One Panel mounted Meter with a selector switch to read both voltage and current

• Front Panel Controls :
  • One DPDT switch to ON/OFF the unit.
  • One Potentiometer with Lock Nut to adjust the output voltage at required level

• Termination - Separate PIRI Terminal Block on Front Panel for Input(AC) and Output(DC) and for Remote sensing.

SPECIFICATIONS FOR 0-16V/0-6A VARIABLE DC POWER SUPPLY

1. Model no : UE-VPS-28.

2. Mains input : 230V, +10%, 50Hz, Single phase.

3. Type : CV/CC.

4. Output a) Voltage : 0-16V Variable continuously with coarse & finepotentiometer mounted on front panel.

b) Current : 0-6A Variable continuously with coarse & finepotentiometer mounted on front panel.

5. Line Regulation : + 0.1% max. Output Voltage for + 10% change

in mains Input Voltage.

6. Load Regulation : + 0.1% max. Output Voltage Change for No-load to full load or Vice-versa.

7. Ripple : Less than 2mV R.M.S.

8. Protections : a) Unit is protected by input fuse.

b) Unit is protected against input surges.

c) Output is protected against over loads &

Continuous short circuits

9. Indication(s) : a) One LED for input

b) One LED each for CV and CC indication

c) One 3 digit digital panel meter is provided

to read output voltage.

d) One 3 digit digital panel meter is provided

to read output current.

10. Controls : a) One ON/OFF switch to ON/OFF the Unit.

b) One Core and one fine potentiometer to

Control the output voltage from 0 to 32V.

c) One Core and one fine potentiometer to

Control the output current from 0 to 20A.

NOTE : d) One potentiometer with locknut is

Provided for over voltage setting if required.

11. Mechanical : Bench top / 19 Rack Mounting as required by

you.

12. Cooling : Forced air cooling.

13. Operating Environment : 1) 0C to +50C

14. Terminals : Banana socket(s) at front panel & Piri Terminal

Strip with remote sensing at rear panel if

Required.

Buy the top-notch Variable DC Power Supply from us at the incredibly low prices. We are associated with the #1league Manufacturers and Suppliers of Variable DC Power Supply from Hyderabad, India. The lingering demand of our Variable DC Power Supply owes to their exceptional performance, easy maintenance, and high durability standards. Moreover, we are well-equipped to tackle even the bulk orders of Variable DC Power Supply in short time duration.

 

Specification For Variable Dc Power Supply :

• Output Voltage - O/P Voltage (Depends on customer requirement) DC Settable Continuously with two potentiometers provided on Front Panel clearly marked with coarse and fine voltage controls

• Output Current - O/P Current (Depends on customer requirement) DC settable continuously with two potentio meters provided on Front Panel clearly marked with coarse and fine controls

• Protections -
  • Unit is protected against input surges.
  • Unit is protected against over loads and continuous short circuits.
  • Fuse protection for input .

• Front Panel Controls -
  • Unit ON/OFF switch
  • Coarse Potentiometers to set the output voltage and current at required level is provided on Front Panel.
  • Input fuse.
  • Binding Terminal for Output.

• Front Panel Indications -
  • LED for Input
  • LED for CV and CC
  • 3½ Digit digital panel meter to read the output voltage.
  • 3½ Digit digital panel meter to read the output load current.

specifications for 0-24v/0-5a variable dc power supply

1. model no : ue-vps-46.

2. mains input : 230v, +10%, 50hz, single phase.

3. type : cv/cc.

4. output a) voltage : 0-24v variable continuously with coarse & finepotentiometer

mounted on front panel.

b) current : 0-5a variable continuously with

coarse & fine potentiometer mounted on front panel.

5. line regulation : + 0.1% max. Output voltage for +10% changein mains

input voltage.

6. load regulation : + 0.1% max. Output voltage change for no-loadto full load or vice-versa.

7. ripple : less than 2mv r.m.s.

8. protections : a) unit is protected by input fuse.

b) unit is protected against input surges.

c) output is protected against over loads &

continuous short circuits

9. indication(s) : a) one led for input

b) one led each for cv and cc indication

c) one 3 digit digital panel meter is provided

to read output voltage.

d) one 3 digit digital panel meter is provided

to read output current.

10. controls : a) one on/off switch to on/off the unit.

b) one core and one fine potentiometer to control the output voltage from 0 to 32v.

c) one core and one fine potentiometer to control the output current from

0 to 20a.

note : d) one potentiometer with locknut isprovided for

over voltage setting if required.

11. mechanical : bench top / 19 rack mounting as required by

you.

12. cooling : natural air cooling.

13. operating environment : 1) 0c to +50c

14. terminals : banana socket(s) at front panel & piri terminal strip with remote sensing at rear panel if required.

SPECIFICATIONS FOR +/-15V/3A D.C. POWER SUPPLY 1 INPUT : 230V AC +/- 10%, single Phase2. OUTPUT : +/-15V DC, 3A3. LINE REGULATION : Less than 0.1% for change in input voltage from 207V to 253 V4. LOAD REGULATION : +/-0.1% for change from no load to full load and vice versa5 RIPPLE : Less than 5mV RMS6 DRAFT IN 24 Hrs. : Less than 25%7 OUTPUT VOLTAGE ADJUST: +/- 5% of rated output.8 PROTECTIONS : Output will be protected against over loads, over voltages and continuous short circuits. 9 INDICATIONS ; One LED each to indicate the availability of DC outputs.10 TERMINATIONAS : Input is given through a Circular connector and output is given through a PIRI Terminal.11 OPERATING TEMP : 0 to 55 Degree12 MECHANICAL SIZE : 3U Height X Half 19 Rack width x less than 300mm depth.Two units fitted in full 19 Rack.13 RELATIVE HUMIDITY : 0 to 90% without condensation.14 TEMP. COEFFICIENT : Less than 0.025% per Degree C.

Feel free to place the order for our Dual Output DC Power Supply that is sturdy, efficient, and long-lasting. Our adroit team fabricates the Dual Output DC Power Supply by exploiting the best resources and pioneering technology. Further, the Dual Output DC Power Supply can be tailored in various specifications to satiate the needs of clients. As a reputed Manufacturer and Supplier, we sell the Dual Output DC Power Supply at bargain prices.

 

Output, Programmable) Servo Stabilizers, Smps, Battery Chargers As Per Customer Requirement :

• Input Voltage - 230V AC, +/-10%, Single phase 50Hz.

• Output Voltage - 0-30V Dual Output (Voltage will depends on your requirement)

• Output Current - 0-5A Dual (Current will depends on your requirement)

• Line Regulation - ±0.1% for input variations from 207V AC to 253V AC

• Load Regulation - ±0.1% no load to full load and vice versa

• Ripple - Less than 3mV RMS

• Protection :
  • Unit is protected against input surges
  • Input is provided through fuse
  • Output is protected against over load, continuous short circuit

• Front Panel Indications :
  • LED indication is provided for both input and output voltage
  • One 3 ½ digit digital voltmeter with selector switch is provided to read the voltage and one 3 ½ digit digital ammeter with selector switch is provided to read the output current for both channel

• Front Panel Controls :
  • One DPST Switch to on/off the unit.
  • One coarse and fine potentiometer is provided to set the output voltage from 0-30V as required for each channel separately
  • One coarse and fine potentiometer is provided to set the output current from 0-5A as required for each channel separately

• Termination :
  • Input is connected through 3 pin power card.
  • Output is terminated through Binding Terminals mounted on Front Panel. Output is also terminated on PIRI terminal strip mounted on rear plate with

SPECIFICATIONS FOR +/-24V/2A D.C. POWER SUPPLY 1 INPUT : 230V AC +/- 10%, single Phase2. OUTPUT : +/-24V DC, 2A 3. LINE REGULATION : Less than 0.1% for change in input voltage from 207V to 253 V 4. LOAD REGULATION : +/-0.1% for change from no load to full load and vice versa 5 RIPPLE : Less than 5mV RMS 6 DRAFT IN 24 Hrs. : Less than 25%7 OUTPUT VOLTAGE ADJUST: +/- 5% of rated output. 8 PROTECTIONS : Output will be protected against over loads, over voltages and continuous short circuits. 9 INDICATIONS ; One LED each to indicate the availability of DC outputs.10 TERMINATIONAS : Input is given through a Circular connector and output is given through a PIRI Terminal. 11 OPERATING TEMP : 0 to 55 Degree 12 MECHANICAL SIZE : 3U Height X Half 19 Rack width x less than 300mm depth.Two units fitted in full 19 Rack.13 RELATIVE HUMIDITY : 0 to 90% without condensation. 14 TEMP. COEFFICIENT : Less than 0.025% per Degree C.15. POWER SUPPLY FAILURE ALARAM : Will be provided with relay contacts 16. PARALLEL OPERATION : Will be provided

SPECIFICATIONS FOR 0-32V/0-3A VARIABLE DC POWER SUPPLY 1. INPUT VOLTAGE : 230V AC, +/-10%, Single Phase 50HZ2. OUTPUT VOLTAGE : 0-32V Continuously variable with a coarse & fine Potentiometers provided on front panel3. OUTPUT VOLATE RESOLUTION: 1mV4. OUTPUT CURRENT : 0-3A continuously variable with a coarse and fine potentiometer provided on front panel.5. OUTPUT CURRENT RESOLUTION: 1mA 6. LINE REGULATION : 0.05% for 10% changes in line voltage7. LOAD REGULATION : 0.05% for load changes from no load to full load 8. RIPPLE & NOISE : Less than 1mV rms9. PROTECTION : 1) Fuse protection will be provided for input 2) Output is protected against over loads and continuous short circuit.10. FRONT PANEL INDICATIONS: 1) LED for CV Operation.2) LED for CC Operation 3) Two separate 3 digit digital panel meters will be Provided to read the output voltage and current separately.11. FRONT PANE CONTROLS : 1) One DPST Switch to on/off the unit.2) One coarse and fine potentio meter is provided to set the output voltage from 0-30V.3) One Coarse and fine potenio meter is provided to set the output current from 0-3A 12. TERMINATION : 1) Input is connected though 3 pin power card.2) Output is terminated through binding terminals mounted on Front Pa13. INSULATION : Between Chassis and output terminal > 10M OhmsBetween Chassis and AC plug > 50M Ohms 14. MOUNTING STYLE : Bench top or 19 Rack mounting 15. OPERATING TEMP. : 0-500C 16. COOLING : Natural Air Cooling

SPECIFICATION FOR 0-16V/0-6A LINEAR REGULATED DC POWER SUPPLY 1. Input : 230V +10%, 50Hz, Single Phase2. Output Voltage : 0-16V DC Settable Continuously with two potentiometers provided on Front Panel clearly marked with coarse and fine voltage control 3. Output Current : 0-6A Max 4. Regulation :(Line) CV :

Get in touch for availing the best in class Multi Output DC Power Supply at the unbelievably low prices. We are banded together with the eminent Manufacturers and Suppliers of the Multi Output DC Power Supply from Hyderabad, India. Offered in ample specifications, our Multi Output DC Power Supply guarantees the unrivaled performance without much upkeep or efforts. Further, the Multi Output DC Power Supply is meticulously checked before the dispatch to ensure 100% quality!

 

Specifications For Multi Output Dc Power Supply :

• Output -
  • Output 1 (Depends on your requirement)
  • Output 2 (Depends on your requirement)
  • Output 3 (Depends on your requirement)

• Output Voltage
  • Accuracy - +/- 1%

• Output Current
  • Accuracy - +/-2%

• Display - 3 ½ Digit digital panel meters along with selector switch to read both voltage and current separately.

• Protections -
  • Input is protected against surges
  • All the outputs are protected against over
  • loads and short circuit current.
  • Fuse protection is provided at input

• Controls -
  • One ON/OFF switch at input side
  • Coarse and fine potentiometer for 0-32V o/p
  • One band switch to select the volt and ammeter readings.

• Indications -
  • LED indications for AC input and for all the outputs.

• Terminations -
  • Input is given through a power card
  • Outputs are brought on to binding terminals on front panel.

• Warranty - Units will be given one year warranty against any manufacturing defects

SPECIFICATION FOR DUAL POWER SUPPLY, MODEL NO:UE-DPS-25 1. Input : 230V, +10%, 50Hz, Single phase2. Out Put : a) 0 15V/0-1A Dual output continuously variable by coarse & fine potentiometers mounted on Front panel 3. Line Regulation : Better than + 0.01%+ 2mV for input line change from 207V AC to 253V AC and vice versa 4. Load Regulation : Better than + 0.01% + 2mV for a load change from no-load to full load and vice versa. 5. Ripple & noise : Less than 2mV R.M.S. 6. Protections : a) Unit is protected against input surges through Line filter b) All the outputs are protected against overloads and continuous short circuitsc) All the outputs are fuse protected7. Indications : a) One LED for input ACb) One DC LED for each output c) One 3digit Digital Voltmeter and one 3digit Digital Ammeter with a selector switch to read both Voltage and Current of each output 8. Controls : a) ON/OFF switch to ON/OFF the Unitb) AC fusec) DC fuse separately for each outputf) Two separate 3 digit digital panel meters to monitor output voltage & current continuously will be provided with a 4 pole/3way Rotary Switch.9. Terminals : a) Input is given through 3 pin power card b) All the outputs are terminated on Piri Terminal strip with remote sensing facility at the rear of the unit. All the outputs are also brought on to the Front Panel on Banana Sockets 10. Operating temperature : 0 - 50C11. Cooling : Natural air cooling/Forced air cooling12. Mechanical : Bench top Model

SPECIFICATION FOR 0-30V/0-5A DC POWER SUPPLY 1. Mains input : 230V, +10%, 50Hz, Single phase2. Type : CV/CC 3. Out Put : Voltage: 0 to 30V Current: 0 to 5A 4. Controls : Coarse & fine controls will be provided on front panel for output Voltage & Current setting 5. Line Regulation : + 0.1% max. Output Voltage for + 10% change in mains Input Voltage.6. Load Regulation : + 0.1% max. Output Voltage Change for No-load to full load or Vice-versa. 7. Ripple : Less than 1mV R.M.S. 8. Protections A) Over load / Short circuit : Automatic crossover type (CV/CC)B) Reverse Voltage : Protection against reverse voltage applied at the terminals will be provided. 9. Indication(s) : Two separate front panel 3 digit digital panel meters/Analogue Meters to monitor output voltage & current continuously will be provided.10. Operating Environment : 1) 0C to +50C2) 90% RH at 40C11. Terminals : Banana socket(s) at front panel & Piri Terminal strip with remote sensing at rear panel. 12. Mounting Style : Bench Type

SPECIFICATIONS FOR 0-20V/0-5A VARIABLE DC POWER SUPPLY, MODEL: UE-VPS-65 01. Input Supply : 230V AC, +/-10%, 50-60Hz, Single Phase 02. Output Supply : 0-20V variable 03. Output Current : 0-5A 04. Line Regulation : 0.1% for change in Mains Voltage 05. Load Regulation : 0.1% for load change from no load to full load and vice versa 06. Ripple & Noise : Less than 2mv RMS 07. Stability : Total drift within 8 hrs. after warm up < +/-0.2% plus 5mV 08. Operating Temp. : 0 to +500 C 09. Mode of Operation : Linear Regulated with CV/CC technique for 0-20V 10. Protections : a) Fuse protection at AC Inputb) Output is protected against over loads and continuous short circuits. 11. Controls : a) ON/OFF switch at AC Inputb) Coarse and Fine potentiometes set the output voltage from 0-20V continuouslyC) Coarse and Fine potentiometes set the output current from 0-5A continuously12. Indications : a) LED Indication for AC input b) LED indications for CV & CC c) 3 Digit Voltmeter and Ammeter to read both voltage and current continuously.13. Terminations : a) Input is given through a power cardb) Output is brought on to binding terminals mounted on Front Panel.14. Mechanical : Bench Top Model

ANNEXURE 1SPECIFICATIONS FOR 0-60V/0-30A VARIABLE DC POWER SUPPLY 1. Mains input : 230V, +10%, 50Hz, Single phase 2. Type : CV/CC3. Output : Voltage: 0-60V Current: 0-30A 4. Controls : MCB for Unit ON/OFFCoarse & fine controls will be provided on front panel for output Voltage & Current settings separately. 5. Line Regulation : + 0. 1% max. Output Voltage for + 10% change in mains Input Voltage. 6. Load Regulation : + 0.1% max. Output Voltage Change for No-load to full load or Vice-versa.7. Ripple : Less than 10 mV R.M.S. 8. Protections A) Over load / Short circuit: Automatic crossover type (CV/CC)B) Reverse Voltage : Protection against reverse voltage applied at the output terminals will be provided.C) Fuse : Fuse protection will be provided for both Input and output at rear side.9. Indication(s) : Two separate front panel 3 digit digital panel me to monitor output voltage & Current continuously will be provided. 10. Operating Environment : 1) 0C to +50C 11. Terminals : Banana socket(s) at front panel & Piri Terminal strip with remote sensing at rear panel. 12. Mounting Style : Bench Type or 19 Rack mounting as required.13. Warranty : 1 Year 14. Technical/Service Manual : Will be supplied along with Power Supply

SPECIFICATIONS FOR 0-48V/0-10A REGULATED DC POWER SUPPLY 01. INPUT : 230V AC, +/-10%, 50Hz, Single Phase02. OUTPUT : 0-48V/0-10Amps03. LINE AND LOAD REGULATION : +/-0.05% for variations in input and load variations 04. RIPPLE : Less than 3mV RMS05. INDICATIONS : a) LED indications for AC input , CV & CC operationsb) 4 Digit digital meters to read output Voltage & Load current.06. CONTROLS : a) ON/OFF switch at input side b) Coarse and Fine voltage set potentiometersc) Coarse Current set potentiometers.07. TERMINATIONS : a) Input through a Power cardb) Output will be brought on to Binding terminals on front Panel and also with remote sense terminals an to rear panel.08. PROTECTIONS : a) Fuse protection will be provided at input b) Outputs are protected against over loads & short circuits.09. MECHANICAL : a) Bench top model10. INSTRUCTION MANUAL : One set of instruction manual will be supplied along with each unit.

We are the name to reckon with bulk orders of Arc Lamp Power Supply from Telangana, India. For years, we have maintained our goodwill among the topmost manufacturers and wholesale suppliers of Arc Lamp Power Supply. Our unique and pristine range of Arc Lamp Power Supply is processed using high-grade raw materials, and checked on numerous parameters of quality in order to deliver the perfect range. While we excel in offering an admirable assortment of Arc Lamp Power Supply at suitable rates, our well-qualified team of professionals processes the Arc Lamp Power Supply using the best raw materials and latest machines. While we offer a wide range of Arc Lamp Power Supply in numerous specifications as per the requirements of the clients, we promise durable and sturdy structures. Keeping the convenience of our clients in mind, we offer high performance, and hassle free services. The Arc Lamp Power Supply is well-regulated with good output regulation, low distortion, and high frequency stability. We source them from trusted and reliable vendors in the market.