technical specifications for solar charge controller

1.nominal voltage : 12v /24v/36v/48v dc

2. max. Charging current : 10a/20a/30a/ 40a/50a/75a/100a

3. deep discharge protection : 10.5v/21.0v

4. Over charge protection : 14.4v/28.8v

5. Restart of charging : 12.5v/25v

6. Reconnection of load : 12.5v/25v

7. Output load current : 10a max.

8. Battery ah rating : 100ah max.

9. Solar panel : 120watts max.

10. Operating temp. : 50c

11. Self consumption : 25ma

12. Protection : a)battery reverse protection

b)solar panel reverse protection

c)battery over charge protection

d)over load protection

13. indications : a)charging on solar

b)battery low

c)over load

d)16x2 lcd display to readreal timeand to set the loadonby offtime

SPECIFICATIONS FOR 0-30V/0-30A VARIABLE DC POWER SUPPLY 1. Mains input : 230V, +10%, 50Hz, Single phase2. Type : CV/CC3. Output : Voltage: 0-30VCurrent: 0-30A4. Controls : MCB for Unit ON/OFF Coarse & fine controls will be provided on front panel for output Voltage & Curren tsettings. 5. Line Regulation : + 0.1% max. Output Voltage for + 10% change in mains Input Voltage.6. Load Regulation : + 0.1% max. Output Voltage Change for No-load to full load or Vice-versa.7. Ripple : Less than 5mV R.M.S. 8. Protections A) Over load / Short circuit: Automatic crossover type (CV/CC)B) Reverse Voltage : Protection against reverse voltage applied at the output terminals will be provided.C) Fuse : Fuse protection will be provided for both Input and Output at rear side. 9. Indication(s) : Two separate front panel 3 digit digital panel meters to monitor output voltage & Current continuously will be provided. 10. Operating Environment : 1) 0C to +50C 11. Terminals : Banana socket(s) at front panel & Piri Terminal strip with remote sensing at rear panel. 12. Mounting Style : Bench Type or 19 Rack mounting as required.

We are the key manufacturers and wholesale suppliers of Switch Mode Power Supply from Telangana, India. Due to their increasing demand, we carefully process the Switch Mode Power Supply using top quality raw material, and guarantee reliable, standardized and durable results. Whilst the Switch Mode Power Supply can be availed at nominal rates, we promise maximum output, low maintenance cost, and trouble-free services.

SPECIFICATIONS I: Parameter: i) Control Voltages: 1. SPV panel disconnection level : 16V + 1VTo prevent from over charging 2. SPV Panel reconnection level : 14V +1V 3. Battery low level cut off : 9.5 + 0.5V 4. Battery reconnection level : 10.5 + 0.5V 5. Disconnection and reconnection : will be automatic ii) Protections: 1. Against battery reverse connection for control unit and load. 2. Against short circuits in the load path by electronic short circuits protection and fuse 3. Against over charge of battery. 4. Against excessive discharge of battery. 5. Against reverse current flow from battery to SPV Panel. iii) Indications: 1. AC ON - green LED. 2. Charging by solar PV module - green LED. ( ON.SPV) 3. Charging by A.C power - green LED. (ON.AC) 4. Battery low - Red LED. 5. Batter Reverse polarity - Red LED. ( BATT.REV)

SPECIFICATIONS 1) Input : 220V +10% 50Hz (AC line power) 2) Output : a) 40V to 75 DC Variableb) 0 to 10V DC Variablec) 20-70V DC Variable3) Output current : a) 0 to 3 Ampsb) 0 to 5 Ampsc) 0-750mA4) Digital display : 4 digit meters for measuring voltages and currents 5) Ripple : < 1% RMS at Battery 6) Efficiency : > 70%@ nominal input and outputat 100% load.7) Insulation resistance : > 2M ohm between the live point and the ground .8) The charger will be able to charge 24 cells of sealed lead acid batteries of 2V each with constant voltage and current limit to a maximum of 3Amps. 9) Discharge facility : Suitable load will be provided for discharging the battery 24 cells of2V each @ C/10 rate (25Ah Battery).This is in order to discharge the cells up to Cut-Off voltage of 1.70V prior to starting of recharge. 10) The battery charger will be provided with over voltage short circuit battery reversal and under voltage cut-off. 11) The charger will be provided with input on discharge ON indication. 12) The charger Input/Output will be terminated on Front Panel.

TECHNICAL SPECIFICATIONS DUAL POWER SUPPLY FOR PURE AIR GENERATOR 1. Output Voltage (Pure sine wave) : 115V AC (98 124V AC)Current Rating : 6AmpsFrequency : 400Hz (380-420 Hz)Load type : Inductive 2. Output Voltage : 28V DC (18 30V DC)Current rating : 300mAmpsRipple : 3mV RMSShort circuit protection & Over load protection 3. Input Voltage : 230V AC (207 250V AC)Frequency : 50Hz (48 52Hz) 4. Indicators : AC Voltage, Current: DC Voltage, Current

If you seek for the quality, reliability and durability in the frequency Converter, then we are the ideal destination for you. Our adept team spares no efforts to develop the Frequency Converter AAPS-1000 that pins down the highest standards of the industry. Moreover, we delight the clients by offering the custom specifications of the Frequency Converters at the feasible prices. As a reputed Frequency Converter AAPS-1000 Manufacturer and Supplier, we fulfill every consignment in postulated time.

 

Technical Specifications For 115v/10a Frequency Converter, Model- UE-AAPS-1000 :

• OUTPUT FREQUENCY STABILITY - Better than +/-0.5%

• OUTPUT POWER - 1000VA

• LINE & LOAD REGULATION - +/-3%

• DISTORTION - Less than 3%

• CONTROLS -
  • ON/OFF Switch at input side
  • Coarse voltage set potentiometers
  • Coarse current set potentiometers

• PROTECTION -
  • Fuse protection will e provided at input
  • Output will be protected against over loadsand continuous short circuits.

• OVER LOAD TRIP - Will be provided

• METERING - Separate meters for output voltage and current.

• WARRANTY - 1 year from the date of supply

SPECIFICATIONS FOR ULTRA SUN SAVER SOLAR CHARGE CONTROLLER WITH TIMER UE-SPV-MCT-02 Ultrons Ultra Sun Saver is the Inidas leading small solar charge controller for both professional and consumer applications. Ultra sun savers technology provides; Exceptional ReliabilityPWM Battery ChargingConsistent High Quality The Ultra sun savers advanced design delivers outstanding performance and value. The Ultra Sun savers low cost made possible by Ultrons unique approach to design and manufacturing. ISO 9001:2008 quality programsLatest Power electronic technologyLatest control and logic technologyHigh volume manufacturing Features: 12V and 24V, 6, 10 and 20Amps100% solid stateSeries design (not shunt)True 0 to 100% PWM duty cycleSet point accuracy to 35mVRated for 25% over loadsNo need to derateParallel for 40A or moreMicro processing controller pulse modulation wide Frequency PWM ChargeProtective circuit of PV from reverse chargingOver loading protectionOver charge protectionShort circuit protectionTemperature compensationApplying with various types of durable batteriesReal timer for load ON & OFF at required time within 24 hrs. TECHNICAL SPECIFICATIONS: a) Nominal Voltage : 12V or 24V DCb) Max. Charging current : 5A or 10Ac) Deep Discharge protection : 10.5V/21.0Vd) Over Charge Protection : 14.4V/28.8Ve) Restart Of Charging : 12.5V/25Vf) Reconnection of Load : 12.5V/25Vg) Output load current : 5A or 10A Max.h) Battery AH Rating : 50AH or 100AH Max.i) Solar Panel : 120Watts Max.j) Operating Temp. : 500 Ck) Self Consumption : 10ma

TECHNICAL SPECIFICATIONSa) Nominal Voltage : 12V or 24V DCb) Max. Charging current : 10A, 20A, 30A or 40Ac) Deep Discharge protection : 10.5V/21.0Vd) Over Charge Protection : 14.4V/28.8Ve) Restart Of Charging : 12.5V/25Vf) Reconnection of Load : 12.5V/25Vg) Output load current : 10A Max.h) Battery AH Rating : 100AH, 150AH or 180AHi) Solar Panel : 100Watts, 200W, 300W, 400Wj) Operating Temp. : 500 Ck) Self Consumption :

SPECIFICATION FOR 12W LED STREET LIGHT1 Input Voltage Range :85VAC - 270VAC2 Frequency Power :47-63Hz3 Power Factor : > 0.904 Light Source: 1.2W High Power LED5 LED Quantity :9Pcs6 LED Luminous Efficiency :100lm/W7 Luminous Flux :850lm8 LED Consumption: 12W9 Power Supply Consumption :1.2W10 Total System Consumption: 15W11 Colour Temperature :6500K12 The Maximum Light Intensity Angle: 120o = Horizontal : 110o Vertical 45o13 Working Temperature 50oC to -10oC14 Working Humidity: 10% to 90% Rh15 Working Life > 50, 000 Hrs.16 Body Material Aluminium Alloy/ABS17 Total Harmonic Distortion :< 20%18 Installation Tube Dia 38mm19 CRI Ra >7520 LED Seoul Semiconductor21Illumination at 6M height: >5.5 Lux8M height :>3.2 Lux10M height:>1.9 Lux12M height:>1.3 Lux22 IP Rating IP65

Situated in Hyderabad, we are the nonpareil Manufacturer and Supplier of the Frequency Converter AAPS-500 in the country. Fabricated using the up-to-date technology and robust raw materials, our Frequency Converter AAPS-500 are in line with the highest industrial standards. Furthermore, our Frequency Converter can be customized in the exacting specifications of the clients. Place the order, small or bulk, to fetch the lucrative price deals.

 

Technical Specifications For 115v/5a Frequency Converter, Model- UE-AAPS-500 :

• OUTPUT VOLTAGE SETTABILITY - +/-10V settable over nominal output voltage

• OUTPUT FREQUEMCY - 400Hz, +/-4% adjustable by front panel control

• OUTPUT FREQUENCY STABILITY - Better than +/-0.5%

• CONTROLS -
  • ON/OFF Switch at input side
  • Coarse voltage set potentiometers
  • Coarse current set potentiometers

• PROTECTION -
  • Fuse protection will e provided at input
  • Output will be protected against over loads and continuous short circuits.

• MECHANICAL - Bench top model

• OVER LOAD TRIP - Will be provided

• METERING - Separate meters for output voltage and current.
• WARRANTY - 1 year from the date of supply

We are the main manufacturers and wholesale suppliers of Dual Power Pure Air Generator from Telangana, India. We are appreciated in the market for offering a wide range of Dual Power Pure Air Generator in various specifications using best quality raw material, and having a longer service life. We have a team of professionals who carefully processes the Dual Power Pure Air Generator and tests it on a variety of parameters to ensure that they are pure and comply with the clients specifications. For the convenience of our clients, we package the Dual Power Pure Air Generator in safe packing boxes/bags and deliver within a short span of time. While the Dual Power Pure Air Generator is protected against short circuit & over load protection, its voltage is of 300m Amps.

Battery Charger Cum Power Supply

We are offering frequency converters

technical specifications for solar charge controller

1.nominal voltage : 12v /24v/36v/48v dc

2. max. Charging current : 10a/20a/30a/ 40a/50a/75a/100a

3. deep discharge protection : 10.5v/21.0v

4. Over charge protection : 14.4v/28.8v

5. Restart of charging : 12.5v/25v

6. Reconnection of load : 12.5v/25v

7. Output load current : 10a max.

8. Battery ah rating : 100ah max.

9. Solar panel : 120watts max.

10. Operating temp. : 50c

11. Self consumption : 25ma

12. Protection : a)battery reverse protection

b)solar panel reverse protection

c)battery over charge protection

d)over load protection

13. indications : a)charging on solar

b)battery low

c)over load

d)16x2 lcd display to readreal timeand to set the loadonby offtime

SPECIFICATIONS FOR 0-30V/0-30A VARIABLE DC POWER SUPPLY 1. Mains input : 230V, +10%, 50Hz, Single phase2. Type : CV/CC3. Output : Voltage: 0-30VCurrent: 0-30A4. Controls : MCB for Unit ON/OFF Coarse & fine controls will be provided on front panel for output Voltage & Curren tsettings. 5. Line Regulation : + 0.1% max. Output Voltage for + 10% change in mains Input Voltage.6. Load Regulation : + 0.1% max. Output Voltage Change for No-load to full load or Vice-versa.7. Ripple : Less than 5mV R.M.S. 8. Protections A) Over load / Short circuit: Automatic crossover type (CV/CC)B) Reverse Voltage : Protection against reverse voltage applied at the output terminals will be provided.C) Fuse : Fuse protection will be provided for both Input and Output at rear side. 9. Indication(s) : Two separate front panel 3 digit digital panel meters to monitor output voltage & Current continuously will be provided. 10. Operating Environment : 1) 0C to +50C 11. Terminals : Banana socket(s) at front panel & Piri Terminal strip with remote sensing at rear panel. 12. Mounting Style : Bench Type or 19 Rack mounting as required.

We are the key manufacturers and wholesale suppliers of Switch Mode Power Supply from Telangana, India. Due to their increasing demand, we carefully process the Switch Mode Power Supply using top quality raw material, and guarantee reliable, standardized and durable results. Whilst the Switch Mode Power Supply can be availed at nominal rates, we promise maximum output, low maintenance cost, and trouble-free services.

SPECIFICATIONS I: Parameter: i) Control Voltages: 1. SPV panel disconnection level : 16V + 1VTo prevent from over charging 2. SPV Panel reconnection level : 14V +1V 3. Battery low level cut off : 9.5 + 0.5V 4. Battery reconnection level : 10.5 + 0.5V 5. Disconnection and reconnection : will be automatic ii) Protections: 1. Against battery reverse connection for control unit and load. 2. Against short circuits in the load path by electronic short circuits protection and fuse 3. Against over charge of battery. 4. Against excessive discharge of battery. 5. Against reverse current flow from battery to SPV Panel. iii) Indications: 1. AC ON - green LED. 2. Charging by solar PV module - green LED. ( ON.SPV) 3. Charging by A.C power - green LED. (ON.AC) 4. Battery low - Red LED. 5. Batter Reverse polarity - Red LED. ( BATT.REV)

SPECIFICATIONS 1) Input : 220V +10% 50Hz (AC line power) 2) Output : a) 40V to 75 DC Variableb) 0 to 10V DC Variablec) 20-70V DC Variable3) Output current : a) 0 to 3 Ampsb) 0 to 5 Ampsc) 0-750mA4) Digital display : 4 digit meters for measuring voltages and currents 5) Ripple : < 1% RMS at Battery 6) Efficiency : > 70%@ nominal input and outputat 100% load.7) Insulation resistance : > 2M ohm between the live point and the ground .8) The charger will be able to charge 24 cells of sealed lead acid batteries of 2V each with constant voltage and current limit to a maximum of 3Amps. 9) Discharge facility : Suitable load will be provided for discharging the battery 24 cells of2V each @ C/10 rate (25Ah Battery).This is in order to discharge the cells up to Cut-Off voltage of 1.70V prior to starting of recharge. 10) The battery charger will be provided with over voltage short circuit battery reversal and under voltage cut-off. 11) The charger will be provided with input on discharge ON indication. 12) The charger Input/Output will be terminated on Front Panel.

TECHNICAL SPECIFICATIONS DUAL POWER SUPPLY FOR PURE AIR GENERATOR 1. Output Voltage (Pure sine wave) : 115V AC (98 124V AC)Current Rating : 6AmpsFrequency : 400Hz (380-420 Hz)Load type : Inductive 2. Output Voltage : 28V DC (18 30V DC)Current rating : 300mAmpsRipple : 3mV RMSShort circuit protection & Over load protection 3. Input Voltage : 230V AC (207 250V AC)Frequency : 50Hz (48 52Hz) 4. Indicators : AC Voltage, Current: DC Voltage, Current

If you seek for the quality, reliability and durability in the frequency Converter, then we are the ideal destination for you. Our adept team spares no efforts to develop the Frequency Converter AAPS-1000 that pins down the highest standards of the industry. Moreover, we delight the clients by offering the custom specifications of the Frequency Converters at the feasible prices. As a reputed Frequency Converter AAPS-1000 Manufacturer and Supplier, we fulfill every consignment in postulated time.

 

Technical Specifications For 115v/10a Frequency Converter, Model- UE-AAPS-1000 :

• OUTPUT FREQUENCY STABILITY - Better than +/-0.5%

• OUTPUT POWER - 1000VA

• LINE & LOAD REGULATION - +/-3%

• DISTORTION - Less than 3%

• CONTROLS -
  • ON/OFF Switch at input side
  • Coarse voltage set potentiometers
  • Coarse current set potentiometers

• PROTECTION -
  • Fuse protection will e provided at input
  • Output will be protected against over loadsand continuous short circuits.

• OVER LOAD TRIP - Will be provided

• METERING - Separate meters for output voltage and current.

• WARRANTY - 1 year from the date of supply

SPECIFICATIONS FOR ULTRA SUN SAVER SOLAR CHARGE CONTROLLER WITH TIMER UE-SPV-MCT-02 Ultrons Ultra Sun Saver is the Inidas leading small solar charge controller for both professional and consumer applications. Ultra sun savers technology provides; Exceptional ReliabilityPWM Battery ChargingConsistent High Quality The Ultra sun savers advanced design delivers outstanding performance and value. The Ultra Sun savers low cost made possible by Ultrons unique approach to design and manufacturing. ISO 9001:2008 quality programsLatest Power electronic technologyLatest control and logic technologyHigh volume manufacturing Features: 12V and 24V, 6, 10 and 20Amps100% solid stateSeries design (not shunt)True 0 to 100% PWM duty cycleSet point accuracy to 35mVRated for 25% over loadsNo need to derateParallel for 40A or moreMicro processing controller pulse modulation wide Frequency PWM ChargeProtective circuit of PV from reverse chargingOver loading protectionOver charge protectionShort circuit protectionTemperature compensationApplying with various types of durable batteriesReal timer for load ON & OFF at required time within 24 hrs. TECHNICAL SPECIFICATIONS: a) Nominal Voltage : 12V or 24V DCb) Max. Charging current : 5A or 10Ac) Deep Discharge protection : 10.5V/21.0Vd) Over Charge Protection : 14.4V/28.8Ve) Restart Of Charging : 12.5V/25Vf) Reconnection of Load : 12.5V/25Vg) Output load current : 5A or 10A Max.h) Battery AH Rating : 50AH or 100AH Max.i) Solar Panel : 120Watts Max.j) Operating Temp. : 500 Ck) Self Consumption : 10ma

TECHNICAL SPECIFICATIONSa) Nominal Voltage : 12V or 24V DCb) Max. Charging current : 10A, 20A, 30A or 40Ac) Deep Discharge protection : 10.5V/21.0Vd) Over Charge Protection : 14.4V/28.8Ve) Restart Of Charging : 12.5V/25Vf) Reconnection of Load : 12.5V/25Vg) Output load current : 10A Max.h) Battery AH Rating : 100AH, 150AH or 180AHi) Solar Panel : 100Watts, 200W, 300W, 400Wj) Operating Temp. : 500 Ck) Self Consumption :

SPECIFICATION FOR 12W LED STREET LIGHT1 Input Voltage Range :85VAC - 270VAC2 Frequency Power :47-63Hz3 Power Factor : > 0.904 Light Source: 1.2W High Power LED5 LED Quantity :9Pcs6 LED Luminous Efficiency :100lm/W7 Luminous Flux :850lm8 LED Consumption: 12W9 Power Supply Consumption :1.2W10 Total System Consumption: 15W11 Colour Temperature :6500K12 The Maximum Light Intensity Angle: 120o = Horizontal : 110o Vertical 45o13 Working Temperature 50oC to -10oC14 Working Humidity: 10% to 90% Rh15 Working Life > 50, 000 Hrs.16 Body Material Aluminium Alloy/ABS17 Total Harmonic Distortion :< 20%18 Installation Tube Dia 38mm19 CRI Ra >7520 LED Seoul Semiconductor21Illumination at 6M height: >5.5 Lux8M height :>3.2 Lux10M height:>1.9 Lux12M height:>1.3 Lux22 IP Rating IP65

Situated in Hyderabad, we are the nonpareil Manufacturer and Supplier of the Frequency Converter AAPS-500 in the country. Fabricated using the up-to-date technology and robust raw materials, our Frequency Converter AAPS-500 are in line with the highest industrial standards. Furthermore, our Frequency Converter can be customized in the exacting specifications of the clients. Place the order, small or bulk, to fetch the lucrative price deals.

 

Technical Specifications For 115v/5a Frequency Converter, Model- UE-AAPS-500 :

• OUTPUT VOLTAGE SETTABILITY - +/-10V settable over nominal output voltage

• OUTPUT FREQUEMCY - 400Hz, +/-4% adjustable by front panel control

• OUTPUT FREQUENCY STABILITY - Better than +/-0.5%

• CONTROLS -
  • ON/OFF Switch at input side
  • Coarse voltage set potentiometers
  • Coarse current set potentiometers

• PROTECTION -
  • Fuse protection will e provided at input
  • Output will be protected against over loads and continuous short circuits.

• MECHANICAL - Bench top model

• OVER LOAD TRIP - Will be provided

• METERING - Separate meters for output voltage and current.
• WARRANTY - 1 year from the date of supply

We are the main manufacturers and wholesale suppliers of Dual Power Pure Air Generator from Telangana, India. We are appreciated in the market for offering a wide range of Dual Power Pure Air Generator in various specifications using best quality raw material, and having a longer service life. We have a team of professionals who carefully processes the Dual Power Pure Air Generator and tests it on a variety of parameters to ensure that they are pure and comply with the clients specifications. For the convenience of our clients, we package the Dual Power Pure Air Generator in safe packing boxes/bags and deliver within a short span of time. While the Dual Power Pure Air Generator is protected against short circuit & over load protection, its voltage is of 300m Amps.

Battery Charger Cum Power Supply

We are offering frequency converters