Product / Services
Post Buy Requirement
Udit Enterprise

Udit Enterprise
GIDC, Porbandar, Gujarat

Add Review
Call 08068051338 Ext. 668

Our Products

  1. Ores And Minerals 22 Products available
  2. Cement 3 Products available

  3. Mortar

    2 Products available

  4. Mineral Ores

    1 Products available
  5. Others Products 7 Products available

Other Products / Services

We offer the best product range of Conventional Castables Whytheat K, Firecrete Normal (UE/FCN), Firecrete Super (UE/FCS), Whytheat C (UE/WC) and Conventional Castables Firecrete Normal.

Conventional Castables Whytheat K

Conventional Castables Whytheat K
  • Brand Name UDIT ENTERPRISE
We are offering conventional castables whytheat k. conventional castablewk is designed ready mixed castable made from a high purity calcium aluminate binder and selected hard burnt dense refractory grog. The refractory castables are hydraulic setting and can be cast or moulded to any shape and also mixed for gunning of furnace lining. this castable comes in packing of 50 kg bags with polythene liners. The standard castable is well graded up to 5 mm size and are packed dry for site mixing with recommended quantity of water. Water content for rodding or vibrating should be 12 % to 15 % by weight of the castable to obtain workable consistency.

TECHNICAL SPECIFICATIONS

DescriptionUnitsUE/WK
Service Temp.˚C1550
Refractoriness˚C1800
D.C.B.D.gm/cc2.2
Linear change % @1400˚C3 Hrs± 1.0
Alumina(Al₂O₃)%60
Ferric(Fe₂O₃)%2.0
Grain sizeMm0-5
*C.C.S.@110˚Ckg/cm² (Min)300
Water Reqd.% @20˚C12-15
View Complete Details
Ask Latest Price & Details
Refractory Mortar

Refractory Mortar
  • Brand Name UDIT ENTERPRISE
We are offering refractory mortar. udit-50 mortar is a highly refractory mortar capable to withstand temperatures up to 1650c and is marketed in powder form in new hdpe bags (with liner). It also possesses air-setting properties. Udit-50 mortar is manufactured from finely ground plastic refractory clays blended with very high alumina refractory material and special chemicals. It contains at least 45% alumina. apart from good heat resisting property, it also has good bonding strength. On heat application during firing udit-50 mortar coalesces with the brick surfaces in the joints and becomes very firm.

TECHNICAL SPECIFICATIONS

DescriptionUE/AC
Al₂O₃ % min45-50
Fe₂O₃ % max3-4
CaO % max-
*C.C.S Kg/cm² (Min)-
*D.C.B.D. gm/cc-
Ser. Temp. ˚C1700
GradeNormal/Fine
View Complete Details
Ask Latest Price & Details
Mortar

Mortar
  • Brand Name UDIT CASTABLE
We offer Mortar.Udit-50 Mortar is a highly refractory Mortar capable to withstand temperatures up to 1650C and is marketed in powder form in new HDPE bags (with liner). It also possesses air-setting properties. Udit-50 Mortar is manufactured from finely ground plastic refractory clays blended with very high Alumina refractory material and special chemicals. It contains at least 45% Alumina.Apart from good heat resisting property, it also has good bonding strength. On heat application during firing Udit-50 mortar coalesces with the brick surfaces in the joints and becomes very firm.Tailor made composition can be made on specific request to any specification.

Additional Information:

Packaging Details : These castables come in packing of 50 kg bags with polythene liners.

View Complete Details
Ask Latest Price & Details
Firecrete Normal (UE/FCN)

Firecrete Normal (UE/FCN)

The company makes available Firecrete Normal (UE/FCN) in various specifications of composition and application specific features. Firecrete Normal (UE/FCN) is formulated using high quality Calcium Aluminate binder and selected hard burnt dense refractory grog. The refractory castables are hydraulic setting are enabled to be molded into different shapes and are also mixed for gunning of furnace lining. The two grades supplied by us are Udit Normal and Udit Super. Firecrete Normal (UE/FCN) comes in packing of 50 kg bags with polythene liners. The standard castable is well graded up to 5 mm size and are packed dry for site mixing with recommended quantity of water. Water content for rodding or vibrating should be 12% to 15% by weight of the castable to obtain workable consistency.

Technical Specification

DescriptionUnitsUE/FCN
Service TempoC1400
RefractorinessoC1450
*D.C.B.D.gm/cc2.1
Linear Change % @1400oC3-Hrs± 1.0
Alumina(Al2O3)%45
Ferric(Fe2O3)%3-5
Grain SizeMm0-5
*C.C.S.@110oCkg/cm2 (Min)250
Water Reqd.% @20oC12-15

*

D.C.B.D.-Dry Cast Bulk Density;

*

C.C.S-Cold Crushing Strength;

*

P.L.C-Permanent Linear Change Note : Above are average test data, subject to reasonable variation. Tailor made composition can be made on specific request to any specification.
View Complete Details
Ask Latest Price & Details
Firecrete Super (UE/FCS)

Firecrete Super (UE/FCS)

The company makes available Firecrete Super (UE/FCS) in various specifications of composition and application specific features. Firecrete Super (UE/FCS) is formulated using high quality Calcium Aluminate binder and selected hard burnt dense refractory grog. The refractory castables are hydraulic setting are enabled to be molded into different shapes and are also mixed for gunning of furnace lining. The two grades supplied in Firecrete Super (UE/FCS) are Udit Normal and Udit Super. Firecrete Super (UE/FCS) comes in packing of 50 kg bags with polythene liners. The standard castable is well graded up to 5 mm size and are packed dry for site mixing with recommended quantity of water. Water content for rodding or vibrating should be 12% to 15% by weight of the castable to obtain workable consistency.

Technical Specification

DescriptionUnitsUE/FCS
Service TempoC1450
RefractorinessoC1500
*D.C.B.D.gm/cc2.4
Linear Change % @1400oC3-Hrs±1.0
Alumina(Al2O3)%60-65
Ferric(Fe2O3)%3-5
Grain SizeMm0-5
*C.C.S.@110oCkg/cm2 (Min)300
Water Reqd.% @20oC12-15

*

D.C.B.D.-Dry Cast Bulk Density;

*

C.C.S-Cold Crushing Strength;

*

P.L.C-Permanent Linear Change Note : Above are average test data, subject to reasonable variation. Tailor made composition can be made on specific request to any specification.
View Complete Details
Ask Latest Price & Details
Whytheat C (UE/WC)

Whytheat C (UE/WC)

The company makes available Whytheat C (UE/WC) in various specifications of composition and application specific features. Whytheat C (UE/WC) is formulated using high quality Calcium Aluminate binder and selected hard burnt dense refractory grog. The refractory castables are hydraulic setting are enabled to be molded into different shapes and are also mixed for gunning of furnace lining. The two grades supplied by us are Udit Normal and Udit Super. Whytheat C (UE/WC) comes in packing of 50 kg bags with polythene liners. The standard castable is well graded up to 5 mm size and are packed dry for site mixing with recommended quantity of water. Water content for rodding or vibrating should be 12% to 15% by weight of the castable to obtain workable consistency.

Technical Specification

DescriptionUnitsUE/WC
Service TempoC1500
RefractorinessoC1550
*D.C.B.Dgm/cc2.1
Linear Change % @1400oC3-Hrs± 1.0
Alumina(Al2O3)%50
Ferric(Fe2O3)%2.0
Grain Sizemm0-5
*C.C.S.@110oCkg/cm2 (Min)300
Water Reqd.%@20oC12-15

*

D.C.B.D.-Dry Cast Bulk Density;

*

C.C.S-Cold Crushing Strength;

*

P.L.C-Permanent Linear Change Note : Above are average test data, subject to reasonable variation. Tailor made composition can be made on specific request to any specification.
View Complete Details
Ask Latest Price & Details
Conventional Castables Firecrete Normal

Conventional Castables Firecrete Normal
  • Brand Name UDIT ENTERPRISE
We are offering conventional castables firecrete normal. Udit normal (ue/fcn) is designed ready mixed castable made from a high purity calcium aluminate binder and selected hard burnt dense refractory grog. The refractory castables are hydraulic setting and can be cast or moulded to any shape and also mixed for gunning of furnace lining. this castable comes in packing of 50 kg bags with polythene liners. The standard castable is well graded up to 5 mm size and are packed dry for site mixing with recommended quantity of water. Water content for rodding or vibrating should be 12% to 15% by weight of the castable to obtain workable consistency.

TECHNICAL SPECIFICATIONS

DescriptionUnitsUE/FCN
Service Temp.˚C1400
Refractoriness˚C1450
D.C.B.D.gm/cc2.1
Linear change % @1400˚C3 Hrs± 1.0
Alumina(Al₂O₃)%45
Ferric(Fe₂O₃)%3-5
Grain sizeMm0-5
*C.C.S.@110˚Ckg/cm² (Min)250
Water Reqd.% @20˚C12-15
View Complete Details
Ask Latest Price & Details
Whytheat A (UE/WA)

Whytheat A (UE/WA)

The company makes available Whytheat A (UE/WA) in various specifications of composition and application specific features. Whytheat A (UE/WA) is formulated using high quality Calcium Aluminate binder and selected hard burnt dense refractory grog. The refractory castables are hydraulic setting are enabled to be molded into different shapes and are also mixed for gunning of furnace lining. The two grades supplied by us are Udit Normal and Udit Super. Whytheat A (UE/WA) comes in packing of 50 kg bags with polythene liners. The standard castable is well graded up to 5 mm size and are packed dry for site mixing with recommended quantity of water. Water content for rodding or vibrating should be 12% to 15% by weight of the castable to obtain workable consistency.

Technical Specification

DescriptionUnitsUE/WA
Service TempoC1700
RefractorinessoC1750
*D.C.B.Dgm/cc2.7
Linear Change % @1400oC3-Hrs± 1.0
Alumina(Al2O3)%90
Ferric(Fe2O3)%0.90
Grain Sizemm0-5
*C.C.S.@110oCkg/cm2 (Min)600
Water Reqd.%@20oC9-10

*

D.C.B.D.-Dry Cast Bulk Density;

*

C.C.S-Cold Crushing Strength;

*

P.L.C-Permanent Linear Change Note : Above are average test data, subject to reasonable variation. Tailor made composition can be made on specific request to any specification.
View Complete Details
Ask Latest Price & Details
Whytheat K (UE/WK)

Whytheat K (UE/WK)

The company makes available Whytheat K (UE/WK) in various specifications of composition and application specific features. Whytheat K (UE/WK) is formulated using high quality Calcium Aluminate binder and selected hard burnt dense refractory grog. The refractory castables are hydraulic setting are enabled to be molded into different shapes and are also mixed for gunning of furnace lining. The two grades supplied by us are Udit Normal and Udit Super. Whytheat K (UE/WK) comes in packing of 50 kg bags with polythene liners. The standard castable is well graded up to 5 mm size and are packed dry for site mixing with recommended quantity of water. Water content for rodding or vibrating should be 12% to 15% by weight of the castable to obtain workable consistency.

Technical Specification

DescriptionUnitsUE/WK
Service TempoC1550
RefractorinessoC1800
*D.C.B.Dgm/cc2.2
Linear Change % @1400oC3-Hrs± 1.0
Alumina(Al2O3)%60
Ferric(Fe2O3)%2.0
Grain Sizemm0-5
*C.C.S.@110oCkg/cm2 (Min)300
Water Reqd.%@20oC12-15

*

D.C.B.D.-Dry Cast Bulk Density;

*

C.C.S-Cold Crushing Strength;

*

P.L.C-Permanent Linear Change Note : Above are average test data, subject to reasonable variation. Tailor made composition can be made on specific request to any specification.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us