Surat, Gujarat, India
Our Products
description:technical data and specifications for standard model vl-2, vl-3, vl-4.
standard accessories :
flame hardened bed ways,
chuck back plate 1 no, centre adapter, dead centres (mt - 3) 2 nos, tool post spanner, motor pulley, thread dial indicator, chip tray, change gear set - 1 (for metric and inch both)
electricals :electric motor of 1 h.p. / 0.75 k.w., 3 phase, 50 hz, 440 v., 1440 rpm with reverse-forward switch, v-belt, electrical wirings and fittings.
| MODEL | ADMIT BETWEEN CENTRES |
LENGTH OF BED |
Floor Space Occupied (m.m.) |
Aprox. Weight in kgs. |
Aprox. Case Dimensions (m.m.) |
|
| Nett. | Gross | |||||
| VL-2 | 660 m.m. | 1370 m.m. | 1500 x 850 | 450 | 625 | 1700 x 900 x 1350 |
| VL-3 | 890 m.m. | 1600 m.m. | 1750 x 850 | 500 | 690 | 1950 x 900 x 1350 |
| VL-4 | 1135 m.m. | 1820 m.m. | 2200 x 850 | 550 | 750 | 2400 x 900 x 1350 |
:
Description:FOR STANDARD MODEL VH-0, VH-1, VH-2, VH-3, VH-4, VH-5, VH-6, VH-7, VH-8.
STANDARD ACCESSORIES :
Flame Hardened bed ways,
Chuck back plate 1 no, centre adapter, Dead centres (MT - 4) 2 nos, Tool Post Spanner, Motor pulley, Thread dial indicator, chip tray, Nylone flat belt, Change gear set - 1 (For metric and inch both)
ELECTRICALS :Electric Motor of 3 H.P. / 2.25 k.w., 3 Phase, 50 Hz, 440 V., 1440 RPM with Reverse-Forward switch, V-Belt, Electrical Wirings and fittings.
IMPORTANT :Any Change in Specifications of the machine like center height, width of bed, hollow of spindle etc. Will be provided as per requirements at extra cost.
| MODEL | ADMIT BETWEEN CENTRES |
LENGTH OF BED |
Floor Space Occupied (m.m.) |
Aprox. Weight in kgs. |
Aprox. Case Dimensions (m.m.) |
|
| Nett. | Gross | |||||
| VH-0 | 525 m.m. | 1675 m.m. (5’-6”) | 2200 x 1450 | 1200 | 1500 | 2400 x 1300 x 1600 |
| VH-1 | 1000 m.m. | 2135 m.m. (7’) | 2660 x 1450 | 1300 | 1700 | 2850 x 1300 x 1600 |
| VH-2 | 1600 m.m. | 2745 m.m. (9’) | 3140 x 1450 | 1400 | 1900 | 3350 x 1300 x 1600 |
| VH-3 | 1900 m.m. | 3050 m.m. (10’) | 3500 x 1450 | 1650 | 2200 | 3700 x 1300 x 1600 |
| VH-4 | 2500 m.m. | 3660 m.m. (12’) | 4110 x 1450 | 1800 | 2400 | 4300 x 1300 x 1600 |
| VH-5 | 3100 m.m. | 4270 m.m. (14’) | 4720 x 1450 | 2100 | 2700 | 5000 x 1300 x 1600 |
| VH-6 | 3710 m.m. | 4875 m.m. (16’) | 5330 x 1450 | 2500 | 3200 | 5550 x 1300 x 1600 |
| VH-7 | 4320 m.m. | 5485 m.m. (18’) | 5940 x 1450 | 2800 | 3600 | 6100 x 1300 x 1600 |
| VH-8 | 4930 m.m. | 6095 m.m. (20’) | 6550 x 1450 | 3100 | 4000 | 6710 x 1300 x 1600 |
STANDARD ACCESSORIES :
Flame Hardened bed ways, Chuck back plate 1 no, centre adapter, Dead centres 2 nos., Tool Post Spanner, Motor pulley, Thread dial indicator, Change gear set - 1 (For metric and inch both) and Norton gearbox.
ELECTRICALS :Electric Motor of 1 H.P. / 0.75 k.w., 3 Phase, 50 Hz, 440 V., 1440 RPM with Reverse - Forward switch, V-Belt, Electrical Wirings and fittings.
| MODEL | ADMIT BETWEEN CENTRES |
LENGTH OF BED | Floor Space Occupied (m.m.) |
Aprox.Weight in Kgs. | Aprox. Case Dimensions (m.m.) |
|
| Nett. | Gross | |||||
| VGL-2 | 660 m.m. | 1370 m.m. | 1500x850 | 550 | 725 | 1700x900x1350 |
| VGL-3 | 890 m.m. | 1600 m.m. | 1750x850 | 600 | 790 | 1950x900x1350 |
| VGL-4 | 1135 m.m. | 1820 m.m. | 2200x850 | 650 | 850 | 2400x900x1350 |
