Industrial Heaters in Udaipur

• Maximum watt density : 3 w/in2
• Maximum supply voltages : 415 V
• Max. Operating Temperature : 200°C
• Max. operating temperature : 200°C

The PH Hopper Heating Module is a rugged design, the high-performance heating surface of the hopper. The Marathon hopper heater are self-contained heaters whose designed provide heat outputs up to 3 watt/squire inch, with a maximum circuit size of 4500watts depending on the application, the design of the hopp more...

• Sheath Length : Up to 10 meter
• Brand Name : Tempsens
• Diameter : 6mm, 8mm, 11mm, 12.5, 13.7mm, 14.5mm, 16mm and 18mm
• Voltage : 220V
• Sheath Material : Copper, Stainless Steel (SS304, SS316, SS321) , Incoloy, Titanium, Other alloys as per application selection
• Watt Density : Up to 120W/in2 or 47W/cm2

Every industry in today’s world is utilizing the some or other form of heating applications. The heating is very much a part of our day to day life. As the dependency on heating application grows, there is a serious concern also expressed related to safety and environmental impact as well as efficiency more...

• Design Pressure : Up to 350 bar(g)
• Terminal Enclosure : As required (Weatherproof or Flameproof)
• Control System : Thermostat control / Contactor control / Thyristor control / combination
• Installation : Horizontal / Vertical / direct / indirect
• Rating : From 0.1 1kW to 5000kW (Max) in Single Bundle or combination
• Design Temperature : -40 deg C to 650 degrees C
• Element Outer Sheath : SS , Alloy 600 series, Alloy 800 series, Hastelloy, Titanium, copper etc
• Certification : Will be provided based on Requirement. ( U, U2, ATEX, IEC Ex, CCOE, etc)

For any Production/process facility, when a large volume of fluid to be heated before pumping out to process application, the Immersion Heaters are always the best-recommended solutions. A single bundle or multiple smaller units can be installed in the Tank for the uniform heat transfer and steady heating of more...

• Power : 1-10 KW
• Supply Type : Manufacturer
• Voltage : 230-440 V
• Size : As Per Requirement
• Material Grade : SS 304
• Frequency : 50Hz

We are reckoned for manufacturing and supplying premium quality Bobbin Heater that is designed by fully immersed applications and with side fitting. Also, customizations can be made to these Bobbin Heaters to fulfill the requirements of our customers. Vigilant quality tests and safe packaging ensures the deli more...

• Supply Type : Manufacturer
• Voltage : Up to 600 volts, Single or 3 phase
• Power Source : Electric
• Pressure rating : Up to 300 PSIG
• Flange size : ANSI up to 24 Inch & Custom Sizes
• Wattage : 0.5 to 60 kilowatts

The Immersion Heaters we offer are specifically designed to heat different kinds of liquids by direct immersion. Quick heating, low power consumption, easy operations and resistance to voltage fluctuations are few attributes that distinguishes our Immersion Heaters from the rest. We are amongst topmost Manufa more...

• Warranty : 1year
• Wattage Tolerance : +/-5%, +/-10%
• Supply Type : Manufacturer
• Automatic Grade : Manual
• Shape : Round
• Material : Ceramic

Nutech Electinstruments (I) Pvt. Ltd. has established itself as a renowned Ceramic Band Heater Manufacturer and Supplier in India. Our Ceramic Band Heaters are manufactured with the use of high temperature oxidation metal sheath and steatite insulators to withstand high temperatures. NiCr Resistance Wire Coil more...

• MOQ : 5 Piece
• Conductor : Ni-Cr 80/20
• Thickness : 12 Mm
• Supply Type : Manufacturer
• Brand Name : FLOMAC
• Length : 50 mm And Above
• Sheath Material : Stainless Steel and anodize coated Galvanized sheet
• Material : Steel
• Voltage : 110 V /230V/ 440 V
• Insulation Thickness : 32mm/54mm/74mm

Ceramic Band Heater FLOMAC offers Ceramic Band Heaters are engineered to suit industrial requirements for high-temperature, long-lasting heaters. These heaters are well-suited to fulfil the demands of today's modern resins, which require continual temperature increases during processing. Internal resistance c more...

• Sheath Temp : 300°c Max
• Supply Type : Manufacturer
• Insulation thickness : 4mm + 6 mm
• Conductor : Ni Cr 80/20
• Length : Min 20mm To 250 Mm
• Voltage : 110V, 230V, 440 V
• Sheath Material : Stainless Steel, Mild Steel, and Galvanized Iron
• Clamping : M6 Allen Bolt With Spring
• Thickness : 4mm
• Watt Density : 10 W/ Sq. Inch

MICA BAND HEATER      FLOMAC provides the Mica Band heaters as an economical and effective answer to the thermal requirements across different uses. These heaters can attain a surface temperature of up to 500°C. The thickness of each mica layer is chosen meticulously to maintain the mica's more...

• Supply Type : Manufacturer
• Operating voltage Range : 12V to 480V
• Working temperature : up to 700°C on sheath
• Conductor : Ni Cr 80/20
• Insulation : High Purity MGO Core & Powder
• Other Sheath : SS-304, SS-321, SS-310, incoloy 800
• Diameter Tolerance : -0.02 to -0.05
• Surface Load : 148 W/inch On Sheath – Depends On Diameter
• Length : 25mm To 2200 Mm
• Length tolerance : ±1% or ±3mm

Cartridge Heater: The High-Density Cartridge Heater is a key product offered by FLOMAC. Its exceptional heat transmission, consistent temperatures, resistance to oxidation and corrosion, and long lifespan—even at temperatures as high as 700◦ C—are all attributed to a careful production process u more...

• Features : Moisture resistant, Corrosion resistant, Explosion resistant.
• Sheath Material : Copper, Steel, 304 Stainless steel, INCOLOY, Titanium
• Power(Watts) : Up to 120 W
• Flange Material : MS, Stainless Steel

more...

• Length : Up to 72 inches

Cartridge heater often considered as component heater a cartridge is dependent on hole clearance. The larger has a heating coil wound on a ceramic core and are the hole clearance the lower the recommended watt cylindrical-shaped, heavy-duty Joule heating element. density. For temperature sensing, a thermocoup more...

• Control : Thermocouple, RTD, Thermostat, Digitally Controlled
• Power(Watts) : Up to 6 kW
• Temperature : 0 to 250 Degree C
• Benefits : Highly efficient, Long working life, Versatile and nonpolluting, Good conductor, Highly suitable for low watt densities.
• Voltage : Customized
• Sheath Material : Copper, Steel, 304 Stainless Steel, INCOLOY
• Diameter : Up to 50 mm

more...

• Diameter : 0.260”, 0.315”, 0.375”, 0.430” or 0.475”, 0.625”
• Voltage : Up to 600 V

Flanged industrial immersion heaters are amongst the most popular heaters owing to wide customization, easier installation and operations in stringent environment. Made by brazing or welding flange with several hairpin elements or bulge tubular elements, these are designed for heating chemical, petroleum and more...

• Voltage : Up to 480V AC
• Heating Capacity : Up to 11.5 kW

Industrial heaters, Cartridge heater often considered as component heater has a heating coil wound on a ceramic core and are cylindrical-shaped, heavy-duty Joule heating element. Electricity flows through coil when a two or three-phase voltage is applied. The electricity heats the coil and, subsequently, the more...

• Diameter : 68 to 170 mm
• Voltage : 240 or 480 V AC

As the name suggests, bundle rod heater consists of circular ceramic beads that hold the heating elements. Also known as Tubothal Heating elements or Bayonets, they are designed for long life and maintenance free operation. The elements can be provided in almost any length but the standard dimensions availabl more...

• Wattage : Up to 2 MW
• Watt Density : Up to 40 W/in2
• Sheath Material : Steel, Copper, Stainless Steel, INCOLOY

Duct heaters are heat transferring devices which are an assembly of heating elements mounted in a frame or duct. Preferably used for non-pressurized air-heating systems, there are three types of duct heaters available: open coil, tubular or finned tubular heating elements that are either flanged or inserted i more...

• Width : 1 to 36 inches
• Length : 1 to 120 inches
• Thickness : 0.056" standard, other thicknesses available

Famously known as “flexible heaters”, silicone rubber heaters are composed of fiberglass reinforced silicone rubbers that are rugged, moisture and chemical resistant, flame retardant, have high dielectric strength and are non toxic. Wire or etched foil heating circuits are positioned between two “wafers more...

• Watt rating : Up to 11.5 kW
• Watt Density : Up to 400 W/in2
• Sheath Material : Stainless steel, INCOLOY

Cartridge heater often considered as component heater has a heating coil wound on a ceramic core and are cylindrical-shaped, heavy-duty Joule heating element. Electricity flows through coil when a two or three-phase voltage is applied. The electricity heats the coil and, subsequently, the cartridge sheath. Th more...

• Type : Industrial Heaters
• Condition : New
• Max Watt Density : 20 w/cm² on the heating element
• Specialities : Vibration And Shock Resistance, Rugged Construction
• Brand : Fragma
• Power Source : Electric
• Application : Water Heating
• Maximum Weight : Aluminium 400kg / Cupronikel 300kg

The cast-in heating plates and heating bands consist of one or several electrical resistances embedded in a block of aluminum, brass, bronze or cupronickel alloy providing excellent thermal conductivity. Cast-in heating elements are ideal for applications requiring homogeneous indirect heat. Cast-in heaters a more...

• Country of Origin : Delhi  
• Brand Name : Fragma
• Feature : Effective heating solution,Shock proof,Low maintenance cost etc.
• Material : Stainless Steel,304,321,Mild Steel jacket etc.
• Brand : Fragma
• Type : Air Heaters

We are a leading name manufacturing U Type Air Heaters in the industry. The U Type Air Heaters we offer finds application in various air heating systems and are high on demand in both national and international markets. For the ease of the clients we provide Tubular Heaters at the most affordable prices. Feat more...

• Finishing : Coated
• Material : Ceramic
• Application : Water Heating
• Voltage : 220V
• Specialities : Vibration And Shock Resistance, Rugged Construction
• Power Source : Electric
• Brand Name : Fragma
• Condition : New
• Phase : Single Phase
• Color : Silver

more...

• MOQ : 1 Nos
• Weight in Kg : 100-200kg
• Temperature Capacity : 25-50C, 50-100C, 100-150C
• Heating Capacity : 15 KW, 20 KW
• Voltage : 440V
• Phase : Three Phase
• Automatic Grade : Automatic
• Material : Steel
• Brand Name : Jaldhara,JALDHARA
• Supply Type : Manufacturer

H.P   :1 HP TO 10 HP KW    :8 KW TO 150 KW TEMP  : 45 TO 200 C           more...

• Application : Industrial Use
• Frequency : 50 Hz
• Material : Steel
• Power : 3
• Color : SILVER
• Brand Name : Jaldhara,JALDHARA
• Supply Type : Manufacturer
• Condition : New
• Voltage : 415
• Packaging Type : BOX

capacity    : 300 cfm to  up  ststic pressure   : 60 mm wg to  500  mm wg rpm             : 2880 drive          :  direct, v belt power       : 415 v material : m.s,   impeller        :   m.s  heater           : 3 kw to 100 kw tempeturer : more...

• Type : Dryers
• Voltage : 440V
• Specialities : Fine Finish, Precisely Designed
• Brand Name : Jaldhara
• Supply Type : Manufacturer
• Packaging Type : Packet
• Power Source : Electric
• Condition : New
• Finishing : Polished
• Color : Silver

From last 23 years, we have been betrothed in manufacturing, exporting and supplying  Salt Dryer Heater.  The offered heater is manufactured by utilizing quality-assured components and modern techniques by our dexterous professionals in accordance with set international standards. This heater is wid more...

• MOQ : 1 Piece
• Supply Type : Manufacturer
• Frequency : 50 Hz
• Type : Shockshafe & Autocut
• Country of Origin : India
• Condition : New
• Voltage : AC 230V
• Application : For Water Heating
• Brand Name : Indoma

more...

• Power Consumption : 1500 W
• Frequency : 50 Hz
• Manufacturer : Indoma Industries Pvt. Ltd.
• Condition : New
• Supply Type : Manufacturer
• Type : Shocksafe
• Voltage : AC 230V
• Brand Name : Littelhome
• Country of Origin : India

more...

• Frequency : 50 Hz
• Type : Shocksafe & Auto Cut
• Power Consumption : 1500W
• Brand Name : Littelhome
• Supply Type : Manufacturer
• Country of Origin : India
• Application : For Water Heating
• Voltage : AC 230V
• Condition : New

more...

• Application : Boiling Water
• Color : Grey
• Driven Type : Electric
• Country of Origin : India
• Supply Type : Manufacturer
• Condition : New
• Automatic Grade : Manual

A hot runner coil heater is a type of heating element that is used in injecting molding and other plastic processing applications. It provides precise and efficient heating for hot runner systems and delivers molten plastic to multiple injection points in a mold. Hot runner coil heater is versatile and compac more...

• Application : Industrial Use
• Country of Origin : India
• Color : Silver
• Power Source : Electric
• Material : Steel
• Finishing : Polished
• Supply Type : Manufacturer
• Condition : New

more...

• Condition : New
• Power Source : Electric
• Country of Origin : India
• Application : Industrial Use
• Type : Cartridge Heaters
• Supply Type : Manufacturer
• Elbow Material : Copper
• Cartridge Material : Stainless Steel
• Color : Silver

more...

• MOQ : 10 Piece(s)
• Packaging : Can be packed as per client requirement
• Condition : New
• Capacity : High

Ours is a reckoned name in this arena and capable to deliver high quality products to our worthy patrons. One can rely on us for the quality as our offerings are prepared using the best in class raw material. We have high-tech and spacious storage unit that is incorporated with all required amenities vital fo more...

• Condition : New
• Temperature Capacity : 150-200C
• Application : Industrial Use
• Type : Electric Air Heater with SCR
• Speciality : Electrical Resistance
• Power Source : Electric
• Country of Origin : India

more...

• Condition : New
• Production Capacity : High
• Packaging : Can be packed as per client requirement

We are backed by the most sophisticated transit system, thus buyers can stay rest assured for timely delivery of the orders. The company laid its foundation stone in Delhi(India) and caters to the market with its wide range.   Features : Highly appreciated Superior quality Timely delivery more...