GST : 19AAACU5698P1ZA
Verified
Write a Review
Our Products
Ties
2 Products availableElectrical Cables & Wires
2 Products availableElectrical Conduits & Fittings
2 Products availableIndustrial & Engineering Products
2 Products availableNuts Bolts And Fasteners
2 Products availableStainless Steel Cable Tie
1 Products availableCable Lugs
1 Products availableGas Pipe Fittings
1 Products availableWe are leaders in the market for providing best range of 33 KV TENSION SET, Galvanised Steel Dead End Service Grip and Galvanised Steel Dead End Distrubution Grip
33 KV TENSION SET
Helical Formed ( Side)Ties For Spool & Pin Insulator
Midspan Compression Joint For AAC & ACSR Conductor
33 KV V-Cross Arms with Pole Top Bracket & Back Clamps for single pole.
Guy Grip for Bare / Covered AAC, AAAC & ACSR
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : Customized
Delivery Time : 10 days
ALUMINIUM LUG
USED FOR ELECTRICAL CONNECTION FROM TRANSFORMER TO CABLE
Copper Lug -630 Sq.mm.
POLE TOP
Helical Formed (Top) Ties For Spool & Pin Insulator
11 KV V-Cross Arms, with Pole Top Brackets & Back Clamps.
Repair Sleeves for AAAC and ACSR Conductors.
Donation For Poor Old People
Price List
sample --------------------$2 usd 100 ml---------------------$40 usd 250 ml --------------------$80 usd 500 ml---------------------$160 usd 1 kg ------------------------$300 usd
Technical Specifications
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Technical Specifications:
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Specifications
|
PLATFORM SIZE (MM) |
630 x 560 |
2 MTRS. |
4 MTRS. |
|
RATED LOAD (HOIST CAPACITY) (KG.) |
230 |
460 |
460 |
|
PERMITTED LOAD (KG.) |
160 |
220 |
260 |
|
PEDAL HOIST |
1 NO. |
2 NOS. |
2 NOS. |
|
BALANCE WEIGHT SUPPLIED (CONCRETE COMPRESSED BLOCK) (KG.) |
250 |
350 |
400 |
|
WIRE ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY LOCK WITH ANTI TILT LOCK (FOR 7.5MM) |
1 NO. |
2 NOS. |
2 NOS. |
|
SUSPENSION DEVICE |
1 NO. |
2 NOS. |
2 NOS. |
| Alloy No. | Color/Shade | Usage(K) | Application | Melting Range deg C | Remarks/comments |
| 1005 | White | 9>14K | C | 1010-965 | High reusability, Ni-Safe |
| 1401 | White | 9>14K | C | 935-890 | Ni Safe with better reusability |
| 1404 | White(14K) | 9>18K | C,H | 950-880 | For H/S & W/S; Ni Safe, high reusability & workability, high fluidity |
| 1405 | Bright White | 9>18K | C,H | 950-1000 | High Nickel but Ni Safe, High fluidity, better luster, Rhodium optional |
| 1801 | White | 18K | C | 980-1020 | Ni Safe, good reusability, low Silicon |
| 5000 | Medium White | 9>18K | C,H,R | 960-990 | For H/S & W/S; Ni Safe, high reusability & workability, low Silicon |
| 5001 | White | 9>18K | C,H | 970-1000 | For H/S & W/S; Ni Safe, good reusability and workability, High fluidity |
| 5002 | Medium White | 9>18K | C,H,R | 970-940 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
| 5003 | Medium White | 9>18K | C,H | 970-950 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
|
S.no. |
Parameters |
Specifications |
|
1. |
Description |
Light creamy to white color fine free flowing powder |
|
2. |
Solubility |
Insoluble in cold water& in alcohol |
|
3. |
pH , 10 % solution ,w/v |
5 to 7 |
|
4. |
Viscosity of 3% solution in Brookfield viscometer LVDV II PRO Model Temp: 800c, Spindle No:3 , RPM : 20 |
2500 to 3500 cPs |
|
5. |
Moisture content, % w/w |
16 % |
|
6. |
Ash content,% w/w on DB |
Max 0.50% |
|
7. |
Bulk density (gm/ml) |
0.65 to 1.0 |
|
8. |
Sieve retention(100 mesh) |
Max 0.5% |
|
9. |
Starch ,% w/w on DB |
Min 95 |
|
10. |
Free Acidity, (ml of 0.1 N NaOH/100 ) |
Max 40.00 |
|
11. |
Sulphur Dioxide , ppm |
Max 80.00 |
| SIZE | Deameter of Toe (mm) |
| S | 15 |
| M | 20 |
| L | 25 |
| Mode | Programs | Power | Load | Operating Frequency |
| Soft | 99 | 150W | 300 Ω | 1Mhz |
| Force | 99 | 150W | 300 Ω | 1Mhz |
| Mode | Programs | Power | Load | Operating Frequency |
| Bi-coag | 99 | 120W | 300 Ω | 1Mhz |
| Bi-cut | 99 | 120W | 300 Ω | 1Mhz |
Specification:
| Model | 161 | 191 | 171 | 172 |
| Display | 3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
| Accuracy | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit |
| Conductivity (EC) | ||||
| Range | 0 - 200 μS 0 - 2, 0 - 20, 0 - 200 mS |
0 - 20 mS | 0 - 20 mS | 0 - 20 mS |
| Resolution | 0.1 μS | 0.01 mS (10 μS) |
0.01 mS (10 μS) |
0.01 mS (10 μS) |
| Range Selection | Manual | - | - | - |
| Accuracy | ± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
| Cell Constant | Adjustable (0.4 - 1.5) |
Pre-Adjusted | Pre-Adjusted | Pre-Adjusted |
| Temp. Coefficient | 2% | 2% | 2% | 2% |
| Temp. Comp. | Adjustable from Table | Adjustable from Table | Adjustable from Table | Adjustable from Table |
| Reference Temp. | 25 oC | 25 oC | 25 oC | 25 oC |
Donation For Poor Old People
Price List
sample --------------------$2 usd 100 ml---------------------$40 usd 250 ml --------------------$80 usd 500 ml---------------------$160 usd 1 kg ------------------------$300 usd
Technical Specifications
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Technical Specifications:
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Specifications
|
PLATFORM SIZE (MM) |
630 x 560 |
2 MTRS. |
4 MTRS. |
|
RATED LOAD (HOIST CAPACITY) (KG.) |
230 |
460 |
460 |
|
PERMITTED LOAD (KG.) |
160 |
220 |
260 |
|
PEDAL HOIST |
1 NO. |
2 NOS. |
2 NOS. |
|
BALANCE WEIGHT SUPPLIED (CONCRETE COMPRESSED BLOCK) (KG.) |
250 |
350 |
400 |
|
WIRE ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY LOCK WITH ANTI TILT LOCK (FOR 7.5MM) |
1 NO. |
2 NOS. |
2 NOS. |
|
SUSPENSION DEVICE |
1 NO. |
2 NOS. |
2 NOS. |
| Alloy No. | Color/Shade | Usage(K) | Application | Melting Range deg C | Remarks/comments |
| 1005 | White | 9>14K | C | 1010-965 | High reusability, Ni-Safe |
| 1401 | White | 9>14K | C | 935-890 | Ni Safe with better reusability |
| 1404 | White(14K) | 9>18K | C,H | 950-880 | For H/S & W/S; Ni Safe, high reusability & workability, high fluidity |
| 1405 | Bright White | 9>18K | C,H | 950-1000 | High Nickel but Ni Safe, High fluidity, better luster, Rhodium optional |
| 1801 | White | 18K | C | 980-1020 | Ni Safe, good reusability, low Silicon |
| 5000 | Medium White | 9>18K | C,H,R | 960-990 | For H/S & W/S; Ni Safe, high reusability & workability, low Silicon |
| 5001 | White | 9>18K | C,H | 970-1000 | For H/S & W/S; Ni Safe, good reusability and workability, High fluidity |
| 5002 | Medium White | 9>18K | C,H,R | 970-940 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
| 5003 | Medium White | 9>18K | C,H | 970-950 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
|
S.no. |
Parameters |
Specifications |
|
1. |
Description |
Light creamy to white color fine free flowing powder |
|
2. |
Solubility |
Insoluble in cold water& in alcohol |
|
3. |
pH , 10 % solution ,w/v |
5 to 7 |
|
4. |
Viscosity of 3% solution in Brookfield viscometer LVDV II PRO Model Temp: 800c, Spindle No:3 , RPM : 20 |
2500 to 3500 cPs |
|
5. |
Moisture content, % w/w |
16 % |
|
6. |
Ash content,% w/w on DB |
Max 0.50% |
|
7. |
Bulk density (gm/ml) |
0.65 to 1.0 |
|
8. |
Sieve retention(100 mesh) |
Max 0.5% |
|
9. |
Starch ,% w/w on DB |
Min 95 |
|
10. |
Free Acidity, (ml of 0.1 N NaOH/100 ) |
Max 40.00 |
|
11. |
Sulphur Dioxide , ppm |
Max 80.00 |
| SIZE | Deameter of Toe (mm) |
| S | 15 |
| M | 20 |
| L | 25 |
| Mode | Programs | Power | Load | Operating Frequency |
| Soft | 99 | 150W | 300 Ω | 1Mhz |
| Force | 99 | 150W | 300 Ω | 1Mhz |
| Mode | Programs | Power | Load | Operating Frequency |
| Bi-coag | 99 | 120W | 300 Ω | 1Mhz |
| Bi-cut | 99 | 120W | 300 Ω | 1Mhz |
Specification:
| Model | 161 | 191 | 171 | 172 |
| Display | 3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
| Accuracy | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit |
| Conductivity (EC) | ||||
| Range | 0 - 200 μS 0 - 2, 0 - 20, 0 - 200 mS |
0 - 20 mS | 0 - 20 mS | 0 - 20 mS |
| Resolution | 0.1 μS | 0.01 mS (10 μS) |
0.01 mS (10 μS) |
0.01 mS (10 μS) |
| Range Selection | Manual | - | - | - |
| Accuracy | ± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
| Cell Constant | Adjustable (0.4 - 1.5) |
Pre-Adjusted | Pre-Adjusted | Pre-Adjusted |
| Temp. Coefficient | 2% | 2% | 2% | 2% |
| Temp. Comp. | Adjustable from Table | Adjustable from Table | Adjustable from Table | Adjustable from Table |
| Reference Temp. | 25 oC | 25 oC | 25 oC | 25 oC |
Mr. Uttam Kumar Basak (UB Exim Private Limited)
85, Elliot Road,6th Floor, Park Street, Kolkata, West Bengal - 700016, India
https://www.ubexim.com
Share us via
View Contact Number 
