Twist Solutions

Arjun Nagar, Gurugram, Haryana

Features :

• Matt finish and anti-glare for accurate readability
• Anti-rust and stainless body

The Fluke 325 Clamp Meter is designed to perform in the toughest environments and provide noise free, reliable results users can trust to confi dently diagnose problems. True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians.

Features:

• Slim, ergonomic design
• CAT IV 300 V/CAT III 600 V safety rating
• Hold button
• Soft carrying case
• 600 V AC and DC voltage measurement
• True-rms AC voltage and current for accurate measurements on non-linear signals
• Resistance measurement to up to 40 k? with continuity detection

Product SpecificationsGENERALAC current:Range: 40.00 A / 400.0 A, Accuracy: 2 % 5 digits (45 Hz to 65 Hz) 2.5 % 5 digits (65 Hz to 400 Hz)

Features:

• Stainless steel base
• Button functions: on/off, zero, mm/inch, ABS, Data preset, Change measuring direction
• Automatic power off, move the digital unit to turn on power
• Battery CR2032, Automatic power off
• Data output
• Optional accessory: Data output cable
• Supplied with pointed tip and ball tip

KAGA1904/0204 : L=4"

KAGA1910 : L=10"

JAAA1303 : 53125mm L=3"-RC-3

JAAA1804 : 90175mm L=4"-RC-4

JAAA1806 : 53125mm L=6"-RC-6

Edge finder is used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling or jig boring machine tables.

Application: Edge Ender is used for lecaaon of edges, sheukters, grooves etc. of work pieces kept on machine table with respect to the machine spindle Shank of the  Edge Finder Is held  In the collect  or chuck and work table is traversed to cause the rotating tip of the edge finder make contact with  the  edge of To work piece to be located. Once the rotating tip comes In contact with the work piece. work table is further traversed so the rotating tip shifts  to a concentric position with  respect to the shank. Now any movement to *oft centre' will cause distinct 'wobble' At this  point, the distance from the work edge to the center of machine spindle Is equal to half the diameter of the tip Of the edge finder. Available in single & double ended tip. Edge finder can be held from both ends and both the tips of two different sizes can be used for edge finding.

Shank and tip of the edge finder are coupled together with the help of  an Internal spring for independent  rotation of both. It is hardened and accurately ground all over to ensure repeatability of work location within 0.01 mm. 

Screw Type Grinding Vice is a precision machine vice, Body & jaw made of tool stool, hardened , tempered & precision ground,

• Hardened & Tempered to 52 -56 HRC.
• All sides Parallelism & Squareness within 0.005
• Inspection certificate is furnished

Precision Sine Vice is used to obtain precise angles by means of gauge blocks. Apart from its use on milling and grinding machine, the sine Vice can also be used as a reference for inspection.

• All Hardened & Tempered to 52-56 HRC.
• All side Parallelism & Squareness within 0.005mm
• Centre distance of rollers within 0-005mm
• Inspection certificate is furnished

KARA0205 : Nozzles : 2.44.8mm

KARA0306 : Nozzles : 3.06.4mm

Precision Compound Sine Vise has a compound sine angle setting on two sine plates. Both the titlings are controlled by fine screws. 

• All hardened & Tempered to 52-58 HRC.
• All side Parallelism & Squareness within 0.005mm
• Centre distance of rollers within 0.005mm
• Inspection certificate is furnished

Magnetic V-Blocks are precision ground V-Blocks with high power magnets. Accurately fitted magnet ensures easy movement of knob. Available in single as well ass matched pairs. 

These V-Blocks have main holding V and bottom face fitted with hardened steel plates having hardness 52-56 HRC

• Parallelism & Squareness of all faces & V within 0.005mm
• Most Suitable for inspection and tool room application
• Inspection certificate is furnished

Steel V- Blocks are made of tool steel, hardened , tempered & precision ground on all side. These are supplied in matched pairs having both sides V with one clamp.

• Unbreakable Steel Clamp
• All Hardened & Tempered 52-56 HRC.
• Parallelism & Squareness of all faces & V within 0.005mm
• Inspection certificate is furnished

Features :

• High visibility yellow blade
• Bi-material case provide comfortable, anti-slip grip
• Triangle shape offers improved stability
• Ergonomic 45º tilt clip for easy belt hook-on

Features :

• Mobile fittings box with removable organizer
• Heavy-duty wheels for safety and comfort
• Robust handle 
• 37 liter volume, 50 kg capacity

Features :

• Versatile plastic body knife
• Great for a variety of light-duty cutting and trimming jobs
• Unique patented snap closure allows quick blade changes
• No need for a screwdriver
• Five position retractable blade
• Stainless steel blade carrier
• Furnished with one 11-921 heavy-duty utility blade
• For light-duty use only

Features :

• Nose overlaps at top and bottom for added strength
• Cast metal textured handle designed for long and tough use
• Works with all STANLEY® replacement utility blades

Features :

• High-impact ABS case for durability
• Corrosion-resistant Tru-Zero® end hook for accurate  measurements

Features :

• Cuts up to 20 gauge (0.91mm) cold-rolled steel or 23 gauge   (0.72mm) stainless-steel
• Durable fully-polished steel blades are forged to stay sharp   for long cutting life
• Adjustment-free fastener prevents loosening of the blades
• Slip-resistant double cushion grip for comfort
• Meets or exceeds ANSI standards

Features :

• Auto reloading cartridge with 6 blades storage provides time saving and improves work efficiency Bi-material ABS + TPR body gives extra comfort and grip control
• Blade clamp enables better blade control and extra security
• Auto slide lock for convenience and safety

Features :

• Full ABS body is lightweight and durable
• Ergonomic design offers a comfortable grip and better handling
• Rigid stainless steel barrel provides smooth action and is  corrosion resistant
• Auto slide lock for convenience and safety

Features :

• Shock absorbing bumpers on the handle reduce tensions during cuttings
• Ergonomic non-slip handle grips provide comfort for your hands
• Top coated with non-stick material makes it easy to clean

Features :

• Polymer coated blade withstands abrasion
• Easy-wind drum for efficient retraction
• Belt clip for hands-free usage and convenient transportation

Features :

• High impact chrome ABS case for tough onsite jobs
• Mylar polyester film extends life of entire blade
• Corrosion-resistant Tru-Zero® end hook for accurate measurements

Features :

• Replacement blade with 15 cutting points for better cost efficiency per point
• Fits Stanley 18mm snap-off blade knives and most other 18mm snap-off blade knives

Features :

• The S300 is the pro’s choice for stud detection. This fully featured model includes a backlit LCD for easy reading in low light conditions and can detect stud centres up to 38mm depth.
• Including AC live wire detection up to 51mm, it also includes a scan mode for precise detection up to 75mm for ferrous metals and 38mm for copper - ideal for pipework detection.
• Detects wood/metal stud centres up to 38mm 

Features :

• Serrated cutting edges to prevent slippage when cutting
• Forged alloy steel for long life
• Single pivot action & soft grip for comfort
• Interlocking joint assembly for smooth cutting
• Heat treated high chrome steel forging for long life and durability

Features :

• The Stanley® moisture meter provides accurate readings in wood  and masonry with two 8mm replaceable detection pins
• The backlit LCD display indicates the moisture level on a bar graph showing results quickly and effectively.
• Measures moisture in wood from 6-44%. Readings over 15% are suspicious and need investigating, over 20% indicate decay

Features :

• Carries up to 4 tool set cases for better   organization with tool/cart sharing 
• 2 sides vertical tool storage on top shelf
• 4 swivel castors for ease of operation

Features :

• Rounded edge helps reduce risk of accidental cuts 
• Helps prevent damage to carton contents when opening boxes
• Fits most standard utility knives

Features :

• Blades of precision steel
• Cuts up to 18mm / 3/4” thickness
• Padded handle for comfort and reduced hand fatigue
• Safety lock feature

C.I. Angle Plate Slotted is made out of high quality seasoned casting having precision ground outside faces & ends. Machined slots for clamping on both faces.

• Accuracy in parallelism & Squareness within 0.01mm per 200 mm length
• Inspection certificate is furnished

Features :

• Convenient hole for looping or bending wire
• Ideal for cutting, stripping speaker wire & appliance cords
• Slide adjust for various gauge wire

Features :

• Measures distance, calculates area & volume
• Automatic calculations make job estimates quick & easy
• Continuous measurement tracking function finds distance from a target quickly & easily 
• Addition/subtraction convenient way to calculate in the field without a  calculator or manual math 

Features :

• Range 65’ (20m) 
• Simple 2-button design for intuitive point and click measuring 
• Measurers distance, calculates area and volume
• Automatic calculations make job estimates quick and easy
• Instantly calculates square footage of a room or space
• Continuous measurement to help find target distance quickly and easily 

Features :

Double sided blade graphics for an easy read

Corrosion-resistant Tru-zero folding end hook for accurate measurements

Grip handle for comfortable portage

Steel parallels are used as precision packing supports under jobs or fixtures. Mase from tool steel, hardened , tempered & precision ground in matched pairs.Matched pairs are marked with identical serial numbers. All sided are chamfered . Overall sizes are nominal.

• Hardened & Tempered 52-56 HRC.
• Parallelliam within 0.005mm up to 200mm length
• Inspection certificate id furnished.